The Xiaomi router keeps turning on the blue light and can t connect

It is recommended that you: 1. Delete the current network and reconnect;

2. Change the encryption method or wifi name of the encryption;

3. Restart the router and try to reconnect to the wifi.

3 possibilities. 1. Extranet.

Broken. Determine the method: When the network is disconnected, remove the router and use the computer to connect directly to the external network to see if it is impossible to access the Internet.

Solution: There is no way to do it if the external network is disconnected, but there is a reconnection mechanism set up in the router when the external network is disconnected, and if it is set, it should not need to be restarted. After the external network is connected, you can connect after a while.

2. The number of router connections or traffic is too large.

Solution: Through the router's traffic monitoring, you can find the computer with a large traffic and stop or reduce the high speed**. If you don't have a wireless password, will anyone else use it, and it will be the case if there are too many people who use it, especially for some unstable routes.

3. The router is unstable.

Solution: Change routers. I've found that some of D-Link's low-end brands often have this kind of problem. There are also routes that have been opened for a long time, and some routers that are not of good quality will age.

Method steps.

1. Open the Mi Router app on your phone, click the "Upgrade" button in the settings interface, 2. Then you can see the current version number that can be updated and upgraded, and click the "One-click upgrade" button.

3. Then you can see that the router is currently upgrading the firmware file required, 4. At this time, if we open the management page of the Xiaomi router in the computer browser, we can also see the prompt that the upgrade is being made.

6. After the update is completed, the router will automatically restart, 7. When the router is restarted, you can see the prompt message that the upgrade has been successfully completed in the mobile version of the Xiaomi router.

The Xiaomi router has a blue light on, but there is no internet connection.

Dear, hello, the reasons and solutions for the blue light on the Xiaomi router but no internet connection are as follows:1Network Failure:

First of all, you need to check whether the network is normal, you can use other devices to test whether the network connection is normal. If the network connection is normal, you can try to power off the router and restart, or long press and hold the "Reset" button on the back of the router for 5 seconds to restore the router to factory settings. 2.

Wrong password: If your router is set up to dial up the Internet, you need to make sure that the password is correct. You can check whether the dial-up username and password are correct in the router management interface.

You can check whether the DHCP server settings are correct in the router management interface. 4.DNS Setup Error:

If the DNS settings are incorrect, you may not be able to connect to the Internet. You can check whether the DNS server settings are correct in the router management interface. 5.

Router suspicion failure: If the above methods cannot solve the problem of asking the scum, it may be that the router itself is faulty, and you need to contact the after-sales service of Xiaojia Doushoumi or go to the after-sales service center for maintenance. In short, if the Xiaomi router has a blue light but cannot connect to the Internet, you need to check them one by one, find the specific cause and take corresponding solutions.

Summary. Hello, it's an honor for me to answer your questions, it will take a little time to sort out the answers, please be patient

Hello, it's an honor for me to answer your questions, it will take a little time to sort out the answers, please be patient

Hello, glad to answer for you. When you go to a Xiaomi router, you will notice that the blue light on the front panel will flash, this is because the router detects that there is an update available, and uses flashing to remind us to update and upgrade the router to the <>

All you need to do is contact your local operator's office to upgrade the Silly Beam Cong level and bring the cherry blossoms.

The Mi router flashes blue.

A router is a device that connects to various LAN and WAN bridges in the Internet, and it will automatically select and set the branch route according to the situation of the channel, and send signals in the order of the best desensitization path. The router is the hub of the Internet.

When the Xiaomi router is flashing, the blue light on the front panel will flash in the macro zhensui, this is because the router detects that there is currently a more advanced and new travel available, and uses flashing to remind us to update and upgrade the router <>

All you need to do is contact your local operator's office to upgrade.

If my answer is helpful to you, please also give a thumbs up (comment in the lower left corner), I look forward to your like, your efforts are very important to me, and your support is also the motivation for my progress. If you feel that my answer is still satisfactory, you can click on my avatar for one-on-one consultation. Finally, I wish you good health and a happy mood to return to the world and <> quickly

Xiaomi router mini

If the status indicator is red, the router is faulty and cannot be used normally. Here's how to fix it:

1. Turn off the Mi router and turn it on, then turn it on again to return to normal messy opening.

2. If it still can't be solved, then in the power-on state, press and hold the reset button of the Xiaomi router to reset it, and after the reset is successful, then enter the router's settings interface to reset the network parameters to return to normal.

3. If the red light still lights up after the reset to indicate the fault, it may be caused by the router firmware damage, and you can use a USB flash drive.

Flash the new firmware to the Xiaomi router to solve the problem; The method is: Visit the firmware package corresponding to the router on the Xiaomi official forum**, save it on the U disk, then connect to the Xiaomi router mini, enter the settings interface of the router, find the local firmware upgrade, select the firmware package of the U disk, start the upgrade, and restart the Mi router after the upgrade to return to normal.

4. In addition, the hardware failure of Xiaomi router mini will also lead to a red light, such as internal circuit failure, motherboard chip or other component failure, etc., this situation needs to contact Xiaomi after-sales service to overhaul the router alarm to solve.

Explain that your router is not connected to the network, you see if your optical modem is normal, if the red light flashes, it is a broadband problem, and it is directly repaired.

Hello. Check whether the Internet connection is normal.

The process of absorbing new phenomena and new knowledge is often a process of assimilating or even reconstructing the new knowledge structure. Therefore, the content of the interactive experience should be combined with students' existing knowledge and common but unnoticed phenomena in their daily life, so that they can arouse their curiosity and subjective consciousness, and generate a desire to explore "why didn't I notice it in the past", or "I believe that stupidity can be changed."

Summary. Dear, I'm honored to have your question The information that the teacher found for you here is: Xiaomi router lights up a blue light and a red light:

The reason why the Xiaomi router lights up one blue light and one red light is: the blue light is on: the system is running normally, and the uboot flashing is successful.

Flashing blue light: The system has a new version to update. Yellow light on:

boot startup, system startup, router reset. Yellow light flashing: hard disk formatting, repair hard disk status, uboot flash status.

Red light on: The system crashes and uboot fails to flash. Flashing red light:

Enter Small System Mode or Recovery System Mode. 1.If there is a problem with the optical interface of the optical modem, you need to replace the optical modem. 2.

The indoor pigtail connection optical modem connector is loose, and the connector can be restored by plugging it in; 3.The bend of the optical fiber in the indoor part is too large.

Dear, I'm honored to have your question The information that the teacher found for you here is: Xiaomi Lu Na Jian You lights up a blue light and a red light: The reason why Xiaomi Router lights up a blue light and a red light is:

Blue light on: The system is running normally, and the uboot is flashing successfully. Flashing blue light:

There is a new version of the system that can be updated. Yellow light: booting, system starting, router reset.

Yellow light flashing: hard disk formatting, repair hard disk status, uboot flash status. The red light is on:

The system crashes and the uboot flashing fails. Flashing red light: Enter the small system mode or restore the system mode.

1.If there is a problem with the optical interface of the optical modem, you need to replace the optical modem. 2.The indoor pigtail connection optical modem connector is loose, and the connector can be restored by plugging it in; 3.

The bend of the optical fiber in the indoor part is too large.

Suggestion: Dear [Xian Hall File Flower] Now that the epidemic is repeated, you must pay attention to the <> of the slag when you go out and pretend to be chaotic

Wear a mask when you go out, wash your hands frequently! Have a great day, <>

Xiaomi Router 3

The blue light is on, and the mobile phone is connected, but it just can't be connected to the Internet, and it can't be connected to the Internet.

1. Open the browser and enter the user name in the address bar.

Password, 2. In the [Setup Wizard], select [PPPoe Dialing], and enter the username and password code for Internet access according to the prompts to save.

3. In [Network Parameters] --WAN Settings], select [Normal Mode], and select [PPPoe Dialing] in the three options of [Connection]. The next thing is to select [Auto Connect] to save and exit.