How to take off the Highlander spare tire, how to take off the Highlander spare tire

To get the spare tire of Highlander, the materials that need to be prepared include: car, sleeve head, and afterburner rod.

First, open the trunk first and find the black lid.

2. Open the black lid.

3. Put the sleeve head on the screw with the black hole.

Fourth, then the afterburner rod is passed through the hole in the middle of the sleeve head.

5. Rotate the afterburner rod counterclockwise.

Sixth, so that the spare tire can be taken down.

Highlander spare tire removal steps:1. Open the toolbox in the trunk. The location of the toolbox is at the bottom of the trunk.

2. Find the nut that holds the spare tire. (The spare tire is fixed to the chassis of the car with a screw) <>

3. Find the nut sleeve.

4. Put the nut sleeve on the nut that fixes the spare tire.

5. Find the afterburner rod and fix it on the nut sleeve.

6. The afterburner rod rotates counterclockwise.

7. Put down the spare tire.

A nut rotator is required, and the specific operation is as follows:

1. Open the suitcase, you will see the round lid as shown in the picture below, unscrew it to the right.

2. Then you will see that there is a nut cover inside, here is the spare tire.

3. Then use the nut rotation tool to rotate the nut down.

4. After unscrewing the nut, you can see that the spare tire has fallen off, but a thin wire is connected.

5. At this time, as long as you tilt it, you can take out the thin wire buckle, so that the spare tire can be taken down.

Open the backup, pick up the last movable floor, you can see the vehicle tool inside, there is a small round cover on the far right, pry it open with a screwdriver, you will see a bolt, there is a special sleeve in the tool, counterclockwise hovering can shake the spare tire down, and then the protective shell under the spare tire can be taken off.

If you want to know how to take off the Highlander spare tire, look at this and you will know.

The Highlander's spare tire is underneath the chassis. If you want to remove the Highlander's spare tire, you must first prepare the tools. The tools you need to prepare include:

1. Open the trunk, there is a small black cover, open the small cover to see the nut.

2. Find the nut that fixes the spare tire (the spare tire is fixed on the chassis of the car with a screw), and put the sleeve head on the screw with the black hole.

3. Then pass the afterburner rod through the hole in the middle of the sleeve head.

4. Rotate the afterburner rod counterclockwise.

5. The spare tire fell off.

Open the rear door of the Highlander, and then open the cover plate on the outside of the rear trunk floor, expose a small cover plate about 7-8cm square on the right side of the car, uncover the cover, it is a screw head, loosen the screw with the tools on the car, loosen the screw tire will come down, and the spare tire can be removed after the screw is loosened.

The Highlander is a car manufactured by Toyota, which is a large-sized SUV in the Toyota family. It has a wide body and an innovative, spacious interior. Moreover, the Highlander is equipped with the highest standard safety equipment in its class.

The SUV is very quiet on the road and extremely responsive, combining versatility and driving comfort. On July 2, 2007, Toyota Highlander was officially launched in China in the form of imports; On April 12, 2009, GAC Toyota officially unveiled the locally-produced Highlander, which was subsequently unveiled at the 2009 Shanghai Auto Show. On June 9, 2012, the facelifted Highlander was launched.

If you want to know how to take off the Highlander spare tire, look at this and you will know.

If you want to know how to take off the Highlander spare tire, look at this and you will know.

Remove the clamping screws and remove the chain. It's a very troublesome process, you can go to the 4S store and ask the staff to get it for you.

Changing a tire itself is not complicated, just like the others. The complication is how to take out the spare tire. The approximate operation process is as follows:

Open the rear door, and then open the cover plate on the outside of the rear trunk floor (called "** cover"), on the right side of the car to expose a small cover plate about 7-8cm square, uncover the cover, it is a screw head, loosen the screw with the tools on the car, the tire is hung on the bottom of the car, loosen the screw tire will come down, and the spare tire can be removed after the screw is loosened; Before removing, the outer cover of the spare tire should be disassembled.

In fact, the assembly method is in the vehicle instruction manual, there are also drawings on it, and what tools to use (the tool cart comes with it) How to use the jack, where they are placed have detailed instructions, go to see, operate and drill by yourself once, and it will be in the future, which is a must.

How to remove the Highlander spare tire: 1. Open the trunk of the Highlander; 2. Find the nut of the stable spare tire and cover the sleeve head on the screw that touches the black hole; 3. Thread the afterburner rod into the hole between the sleeve heads and rotate counterclockwise; 4. The spare tire can be removed. The Highlander is a midsize SUV owned by the Toyota Motor Group.

Its length, width and height are 4890mm, 1925mm and 1715mm, the wheelbase is 2790mm, and the fuel tank volume is l. Toyota Highlander opted for a turbo engine with a maximum power of 162kw and a maximum speed of 5200 to 5600rpm. The Highlander has a wide interior and is equipped with the highest standard of safety equipment in its class. This volt-foot SUV is very calm and responsive to drive, blending variety and driving comfort.

The Highlander's spare tire is underneath the chassis. If you want to remove a Highlander's spare tire, you must first prepare the tools. The tools you need to prepare include:

Trolleys, sleeve heads, and booster rods. The tools are in the toolbox, which is located at the bottom of the trunk (visible when you pick up the last movable lid). Once you have all the tools ready, follow these steps:

1. Open the trunk, there is a small black cover, open the small cover and you can see the nut.

2.Find the nut that holds the spare tire in place (use screws to secure the spare tire to the chassis of the car) and place the sleeve head on the screw with the black hole.

3.Then, pass the force application rod through the hole in the middle of the casing head.

4.Turn the force bar counterclockwise.

5.The spare tire fell off.

6.Tilt the guard plate under the spare tire to remove it.

As of November 27, 2019, the latest Highlander model on sale is the 2018 model, with an official guide price of 10,000 yuan. There are 16 models on sale, and the car is divided into two emission standards: China V and China VI.

In terms of body size, the length, width and height are 4890 1925 1720mm, and the wheelbase is 2790mm. Some models have a height of 1715 mm. The seating layout is divided into five and seven seats.

Millions of brothers bend car purchase subsidies.

Open the rear door of the Highlander, and then open the cover on the outside of the rear trunk floor, revealing a small cover about 7-8cm square on the right side of the car. Loosen the screws with the tools provided in the car, and the screw tires will come down. Once the screws are loosened, the spare tire can be removed.

Steps to replace the spare tire:1. If you need to change your car's spare tire, have a jack, wrench, and spare tire ready.

2.Use a jack to jack the car up, then use a wrench to unscrew the tire screws. 3.

After all the screws are unscrewed, you can remove the tire and replace the spare tire. 4.When all tire screws are tightened, remove the jack and replace the spare tire.

It should be noted that the spare tire should not be used for a long time. The spare tire is actually an emergency tire, not a long-term tire. No matter how wide or narrow the spare tire is, the manufacturer has special production and use requirements.

Because the spare tire does not run in the car for a long time and is not worn, the tire without wear is not the same as the tire that has been worn, and there are certain safety hazards in the use of the spare tire in the car. Users can't change the original tire with a spare tire just because the car has run a few kilometers. Because the production time of the spare tire and the original tire are different, the aging and hardening degree of the tire are simple, the service life and the degree of deformation are also different, and it is unsafe to use them for a long time.

Spare wheel closed tires should be replaced with original tires in time after emergency use.

Millions of car purchase subsidies.

Open the rear door of the Highlander, and then open the cover on the outside of the rear trunk floor, and expose a small cover about 7-8cm square on the right side of the car.

Steps to replace the spare tire:

1. If you need to replace the spare tire of the car, you should prepare a jack, a wrench and a spare tire.

2. Use a jack to jack up the car first, and then use a wrench to unscrew the screws of the tire.

3. After all the screws are unscrewed, you can remove the tire and replace it with the spare tire.

4. After all the tire screws are screwed as they are, remove the jack and the spare tire will be replaced.

It should be noted that spare tires should not be used for a long time. A spare tire is actually an emergency tire, not a tire for long-term use.

Regardless of whether the spare tire is wide or narrow, manufacturers have special production and use requirements. Because the spare tire is not hung on the car for a long time, there is no wear, so a tire without wear and a tire that has been worn out is not the same, and the spare tire itself has certain safety hazards when used in the car. In the process of use, the user cannot replace the original tire with a spare tire because the car has run for several kilometers.

Because the production time of the spare tire and the original tire are different, the tire aging, hardening degree, life and deformation are different, so it is not safe to use it for a long time. The spare tire should be replaced with the original tire in time after emergency use.

Photo by Li Yuanli of Pacific Automobile Network).