How to fish if the current is fast, how to fish if the current is too fast

How to fish in the case of strong winds and waves and strong currents.

1. Drift fishing: For users who are accustomed to seeing floating signals, no drift fishing is like being blind. The drift fishing method is to fish off the bottom, and the line group moves with the current.

The bait is thrown upstream, floats downstream, lifts the rod, and so on. It is best to fog the bait quickly, so that it is easy to attract fish.

Fishing: Fishing on rapids, this method of fishing is very effective!

Here to share the Dadu River rapids fishing method, generally with a sea rod cast fishing, the line group is simple a through line, the hook with 10-16 Iseni, 50-60 cm from the hook tied to the stone, live fish eat the hook after the tuo off. Hope it helps.

If you can't hang fish in a place where the current is too fast, let's change the place.

Big drift, big fall, short brain line, heavy with the drop, avoid drifting as much as possible, and choose a place with a slower current as a fishing spot.

I will give you a reference, I often fish like this, there are many crucian carp in places with fast currents, and the fishing method is simple. Traditional fishing with a long rod, with a 7-star ticket small hook to adjust the drift: for example, the water depth of meters.

30 cm away from the hook and then 20 cm apart for a ticket, the distance of the 7th drift is about one meter away from the hook, which can be adjusted according to the depth of the water. White foam particles are hung on the hook, which is easy to find, and there are packaged appliances and everything. Fishing method we call spring fishing, is to throw the hook to the water, the hook is washed away by the water at the same time is also falling, at this time to see the drift, drift to the end to stop falling pull rod on the fish float to the bottom after stopping for 2 seconds and then flick it, no fish on the rod to start again.

If there are many fish in the river, it is easy to catch crucian carp. In this way, there are too many white stripes.

If the current is too fast, you can use the boring rod fishing method. The so-called rod fishing method is to use the turbulent water in the river to keep the fish and the tip of the rod in a slightly taut state. Judging whether there is a fish on the hook is to see whether there is movement in the fishing line and the tip of the rod, once there is a very big movement, it is decisive to pierce the fish and raise the rod, this fishing method does not need to float.

In the river, the fish are complex, and there may be very large fish to bite the hook, so when we fish in the river, the thin lines that are fishing in the pits are not good, and the lines and hooks are replaced with thicker and more durable fishing lines. In addition to the big fish in the river, the flow rate of the river water is also not negligible, and it would be a pity if the line was tangent when the hook was taken. The size of the fish can be easily judged from the mouth of the fish, which is pulled and put into a small fish, repeatedly pulled and put into a crucian carp, and slowly bent into a large fish.

The relatively fast water flow should first follow the principle of shallow fishing in water depth and deep fishing in shallow water, and then you can also add appropriate lead counterweight to the line set to reduce the impact of water flow on the line group. At the same time, you should also choose rubbing bait, which has a faster speed of entering the water than other baits, and can also be closer to the fishing spot when entering the water, and will not be washed too far by the current.

When the current is fast and the water is empty, you can follow the principle of "deep water and shallow fishing, shallow water and deep fishing", which can greatly alleviate the influence of water flow on the line group. Alternatively, you can fish in a bend in a relatively slower area of the water where the current is slower and there are more fish.

In places where the current is larger, it is recommended to add appropriate lead weight to the line group, which can also reduce the impact of the current on the line group. Alternatively, you can use the slippery lead fishing method, which fixes the lure's range of motion.

When fishing in a place with fast currents, the choice of bait is also extremely important, and it is recommended to choose rubbing bait as it is likely to be washed away by the current if you use other bait. In addition, compared with other baits, the bait enters the water faster, and it can also be closer to the fishing spot when entering the water, and will not be washed too far by the current.

<> rapids water fishing digging and staring is generally used to run lead or double lead. Usually when the current is high, you can use a non-drift way to fish, which requires more lead skin, so that the hook and bait can stand up at the bottom of the water, and the lead sinker is to add space beans and move it up about 10 cm. Usually the tip of the rod should be about 10 cm away from the water surface of the sock, so that by observing the action, you can grasp the timing of lifting the rod.

1. In the rapids environment, use the top fishing method.

Collapse tip fishing, is the most representative of fishing in the rapids water environment, this fishing method was first used for the Yellow River fishing, because the Yellow River is very large, resulting in floating can not stand at all, so simply do not need to float fishing, when there are fish to eat bait or after the hook, according to the rod slightly shake to judge, whether there is a fish on the hook.

The method of fishing is very important for the choice of rod, if the rod is a little too hard, even if a fish is baited, it will not be easy to spot. Therefore, when using the crumbling tip fishing method, the tonality of the fishing rod should be selected within 37 tones, and the hardest should not exceed 28 tones, otherwise it will not be able to break the tip. There is no float on the whole line set, and a movable lead sinker is installed according to the size of the current, but the space beans must be pulled apart, similar to fishing for "running lead".

2. In the environment of rapid water, the small rock rod string hook fishing method.

Small isopole adaptability. Why not use a sea rod instead of a small rock rod to fish for a string hook? The sea rod is too hard and the shore raft is too soft, and only the small rock rod is moderately soft and hard, so it can catch both small and medium-sized individual fish, and at the same time can take into account slightly larger fish.

The small rock rod has a strong ability to adapt to the environment, whether it is fishing far or close, it can be used, especially for fishing small and medium-sized fish, and the signal transmission is very sensitive.

Size selection. The use of small rock rod fishing hook, in the environment of rapid water, the length of the small rock rod is not too long, although it is said that one inch long, one inch strong, but the small rock rod is relatively soft, and the process of lead sinker load is too large, but it is not conducive to throwing. Therefore, the size of the fishing rod is controlled within meters, and it is enough to use it.

Here's how to fish in a river with a fast current:

1. Make a fuss about lead and fight against gentle water flow.

This is the easiest way to fight the flow of water directly. In the flowing water, the float and underwater hook bait will be carried away from the fishing point by the flowing water, in order to contain the line group, the use of heavy lead (eat lead in 5g or above) fishing method, the specific operation is very simple, increase the weight of lead, let it lie on the bottom, with a slightly larger float weight, the stability of the weight float in the water is better.

In this way, the lead weight can ensure that the hook bait stays in place, although it is tilted underwater, the number of float meshes is high, and it will not sink completely. In addition to this method, many anglers have also mentioned the running lead and double lead fishing methods, which are similar in principle, and I will not elaborate too much here.

2. No drift fishing, similar to crayfish fishing or sea rod hook.

For very fast currents, which can no longer be controlled by the sinker, then we simply discard the float and adopt the no-drift fishing method. In this case, it is best to choose a bait with good hooking, do not float, fix the fishing rod, and understand the bait of the fish in two ways.

The first is to touch the rod with your hand and feel the movement on the rod, and the second is to observe whether the line and rod are tight or bent. Don't underestimate this method, it is difficult for fish to eat bait in flowing water, and the activity of fish in natural waters is good, and they eat bait fiercely, and they often encounter "solid mouths".

3. Find the right fishing position, this is the fish nest.

When the current is too fast, the fish are active against the flowing water, the physical exertion is large, it is difficult to eat, and the demand for food is large, as long as the current is a little slower to find a fishing position, this is the place where the fish rest and feed. In addition, the river's inlet can be called an excellent fishing spot, where food is alluvial and the water is basically stationary, so you can completely avoid the influence of flowing water.

Fishing in places where the current of large rivers is very fast can be used to fish with tight tips, drift fishing, and lead fishing.

1. Tight tip fishing: The tight tip fishing method is a bit similar to raft fishing, which is to judge whether the fish is hit by observing the tip of the rod. The line set is the same as the fishing line, but there is no floating.

After the hook is hung with the bait, it is thrown directly into the water, and then the rod is attached to the rod holder, and the bait, plumb sinker, and fishing line will flow downstream with the current. Until the line is straightened and the tip of the rod is taut. At this time, the tip of the rod is slightly bent downward, the sinker lies flat on the bottom of the water, and the bait is downstream of the sinker.

2. Drift fishing: that is, fishing off the bottom, the line group moves with the current. The bait is thrown upstream, floats downstream, lifts the rod, and so on. It is best to fog the bait quickly, so that it is easy to attract fish.

3. Running lead fishing method: The lead sinker is aggravated, and the upper space bean of the lead seat is moved up by ten centimeters, so that the lead seat is active. Since the current will wash the float downstream, the lead should be heavy enough and there is no need to find the bottom to move the float upwards until the tip of the float is exposed.