How to remove limescale from a faucet, how to remove limescale from a faucet

1. If the amount of water flowing out of the faucet is small, it means that there are debris on the filter screen of the faucet outlet, which is mostly caused by the accumulation of scale. You can remove the strainer, soak it in hot water with white vinegar, rinse it with clean water and put it back on. Showers are prone to similar situations because they usually produce more water, and some showers have soft silicone, which can also be rubbed by hand after opening.

2. Wipe the surface with a towel. A slight limescale should come off immediately. It is also possible to pour the vinegar solution into a bowl, dip a rag in the vinegar, and wipe the surface.

3. It is also very effective to use potato skin to remove scale, I don't know, first put the potato skin in the electric kettle, and then add an appropriate amount of water to the kettle to heat and boil, boil for about 10 minutes to remove the scale in the electric kettle, without any detergent to be able to get it, the key is that the material is very simple, after cooking once or twice with this method, you will find that not only the original scale can gradually fall off, but also play the role of waterproof and scale.

As the weather gets hotter, people use water heaters more often. On the one hand, the scale in the water heater is easy to breed bacteria and cause various diseases, and on the other hand, it reduces the efficiency of the water heater, and may even cause it. So how do we get rid of limescale?

Electric water heater belongs to professional equipment, it is best to ask professionals to clean it, if you clean it yourself, you can clean it yourself every six months, the cleaning steps are not complicated, you can complete it yourself. But be sure to stay safe.

First of all, unplug the electrical outlet, it is best to turn off the main power supply in the house, and close the water inlet and outlet valves.

Then, unscrew the nut of the hot water inlet and block the hot water inlet with your hands (take care to make sure that there is no hot water in the water heater to prevent scalding) to prevent the water from flowing out of the water heater. At the same time, unscrew the nut of the cold water nozzle, connect the hose (shower pipe can be) to drain the water, until there is no water flowing out of the cold water inlet, and the 50L water heater will drain the water for about 1 hour.

Finally: remove the hose connected to the cold water inlet, connect the hose to the hot water inlet at one end and the faucet at the other end, open the faucet and fill the water for 1 minute, and plug the cold water inlet, let the cold water in the inner tank for a while longer, then open the cold water inlet to drain the water, and repeat several times until the discharged water is clean. Screw the nuts of the cold water port and hot water port, open the triangle valve, and turn on the hot water from the faucet of the water heater, and close it after the water flows out.

Gas water heaters.

The gas water heater is actually a heating pipe, and when cleaning, you only need to remove the water heater and pour detergent from the water inlet and keep it for a while. The commonly used detergent can be mixed with white vinegar and water 1:4, in fact, the dilution of toilet cleaner is also good, and there is a special detergent sold in the supermarket.

Because the instantaneous electric water heater does not need to be preheated in advance, there is no heat energy loss when preheating, and it is closed when it is opened and not in use, so it will not store water, so it is not easy to produce scale, and there is no energy consumption of unused remaining hot water heated by the storage water heater, which truly saves energy, electricity and water. Generally speaking, tankless water heaters save 15%-30% less electricity than traditional electric water heaters

The faucet is treated in this way, it is not clogged or rusty, and you can use it for as long as you want.

Clean faucets with limescale.

How to remove limescale from faucets:

1. Toothpaste removal: Apply the toothpaste to the limescale and wipe it clean with a damp rag.

2. White vinegar removal: apply a rag stained with white vinegar to the scale, and remove it with water after the scale falls off.

3. Removal of limescale detergent: Spray the detergent on the limescale place, and then wipe it with a damp rag.

4. You can use potato skin, wipe back and forth on the faucet, let it stand for a few minutes, and then wipe it with a wet rag, and the faucet will become bright in an instant.

Precautions for daily use of faucets.

1. The action of opening and closing the faucet should not be too big, just turn around. Even a traditional old-fashioned faucet can't be wrung with a lot of force. And you can't usually hang anything on the handle of the faucet, otherwise it will damage the faucet.

2. The hose of the bathroom faucet should be kept in a natural state, do not wrap it around the faucet, and when not in use, the hose and joints should not form a dead end, otherwise the hose will be broken.

3. Under normal water pressure, if you find that the water output is small or the water heater is out of flame, you can unscrew the screen cover of the faucet to remove impurities. Moreover, when the faucet is installed, it is necessary to ask professionals to construct and install. At the same time, the faucet usually cannot collide with hard objects, nor can it be contaminated with cement and glue.

Otherwise, it will destroy the gloss of the surface.

In daily life, we will all find that some scale will appear when the faucet at home has been used for a certain period of time. But many people feel scrambled when they encounter such a problem. So, how do you remove limescale from a faucet?

Let's find out together!

1. Clean with toothpaste.

In fact, toothpaste can effectively remove limescale from the faucet. First you can squeeze some toothpaste, then find a toothbrush that you don't use and brush your teeth to clean the limescale from the faucet. But if you don't have a toothbrush you don't use, you can find a cotton cloth or sponge, moisten them and then dip them in toothpaste, and then wipe them on the limescale of the faucet.

2. Clean with vinegar.

Pour some vinegar into a bowl, then take a spoon and pour the vinegar on a paper towel, then wipe it on the watermark, and finally rinse it with hot water. However, if you think that the color of aged vinegar is not good-looking, you can use white vinegar, in fact, the effect of white vinegar is the same.

3. Clean with lemon.

The cleansing power of lemons is also not to be underestimated. So you can go to the supermarket or fruit store to buy a few lemons first, then cut the lemons and drip some lemon juice on the faucet, and finally rub them with a steel wool ball a few times.

4: Clean with potato peels.

Go to the supermarket and buy a few potatoes, then peel off the potatoes, wipe the meaty side back and forth on the limescale of the faucet several times, and if the limescale is stubborn, let the potato skin sit on it for a few minutes, the main purpose is to let the potato juice fully dissolve the limescale. Finally, wipe it with a cloth so that the limescale is completely removed.

Summary: The methods to remove limescale in the faucet are: 1. Clean with toothpaste

In fact, toothpaste can effectively remove limescale from the faucet. 2. Clean with edible vinegar: If you think the color of aged vinegar is not good-looking, you can use white vinegar; 3. Clean with lemon: In fact, the cleaning power of lemon should not be underestimated; 4：

Clean with potato peels.

The faucet is treated in this way, it is not clogged or rusty, and you can use it for as long as you want.

How to remove limescale from the faucet, teach you a trick to easily remove and become clean.

1. The faucet has been used for a long time, and the water is not smooth (bifurcation) and other phenomena. is the result of the deposition of substances in tap water.

2. Prepare a small plastic bag and place it on the table.

3. Add an appropriate amount of vinegar, about 50ml.

4. Insert the faucet into the vinegar and tie a plastic bag to the faucet.

5. After about 2 hours, remove the plastic bag. That's smooth.