At present, the company is ready to bid for elevators, please consult elevator bidding issues!

1. The selection should be considered from all aspects of civil engineering cost, elevator equipment cost and elevator use cost;

2. The consideration of the civil construction cost of the elevator must see whether the machine room elevator can not be used;

3. The cost of the elevator can be considered not to use the hydraulic elevator;

4. The cost of elevator use should not choose hydraulic elevator and two-speed elevator, but use frequency conversion freight elevator.

5. The elevator also needs to choose an authentic brand elevator, especially the cheap second-hand elevator should not be chosen (the second-hand freight elevator equipment is low, but the power consumption is large, and it is not safe).

Of course, it depends on whether the elevator is used by yourself or in multiple directions, and everything must be based on reality!!

First of all, I want to know whether you want to purchase a passenger elevator or a freight elevator? If it is a super high-rise passenger elevator, you can recommend Tianjin Otis Elevator, Suzhou Schindler Elevator and Shanghai Mitsubishi, Fuji Elevator is especially not recommended, because I don't know which Fuji elevator you are talking about? Fuji, Sanyo, Siemens elevator these are fake brands, these brands are not involved in the elevator industry, Fuji elevator in China has more than 30, all have nothing to do with it, but the legal person of these companies in the name of the company set their own, they use the inverter and several other small accessories are produced by Fuji Electric Company, so it is also named.

Last year, there was a Guangzhou Fuji elevator engineering **** sued the national Fuji elevator factory, Guangzhou Fuji elevator engineering **** is a sales, installation and maintenance engineering company, which has no manufacturing qualifications. But the first to register the Fuji elevator trademark in the China Trademark Office, other Fuji elevators have been accused, and now it should be judged that Huizhou Fuji Elevator and Foshan Fuji lost the lawsuit, and then all the defendants will be made, and the relevant news can be searched on the Internet Yangcheng Evening News in Guangzhou about the progress of the Fuji elevator case.

Passenger elevators? Freight?

Landings? Load?

Velocity? The few brands you recommend should be passenger elevators, Otis, Schindler, and Mitsubishi are all good!

1 otis USA Otis.

2 Schindler, Lucerne, Switzerland, Schindler, 3 thyssenkrupp, Thyssen, Germany.

4 kone Finland KONE.

5 mitsubishi, Japan, Mitsubishi.

6 hitachi Japan Hitachi.

Fuji and the Great Wall take it off, and the others are optional.

**No, what else is.

Summary. Hello, kiss <>

It is possible to bid together, and the bidding for elevator equipment and mechanical and electrical equipment can be carried out together. According to Article 42 of the Tendering and Bidding Law of the People's Republic of China, the procuring entity may bid for goods or services of the same or similar kind separately, or may combine the bidding for goods or services of different types and natures.

Elevator equipment and electromechanical equipment can be tendered in the same bidding project.

Can elevator equipment bidding be tendered together with mechanical and electrical equipment?

Hello, kiss hail is grinding <>

It is possible to bid together, oh dear, elevator Qinghui equipment bidding and mechanical and electrical equipment bidding can be carried out together. According to Article 42 of the Tendering and Bidding Law of the People's Republic of China, the procuring unit may bid for goods or services of the same type or similar to each other separately, or may combine the bidding of goods or services of different types and natures.

Elevator equipment and electromechanical equipment can be tendered in the same bidding project.

Kiss <>

In the bidding process, it is necessary to prepare bidding documents and clarify the bidding scope, requirements, standards and other contents to ensure fair competition. In the bidding documents, it is necessary to clarify the technical specifications and performance requirements of elevator equipment and mechanical and electrical equipment to ensure that the bidding results meet the requirements. In the bid evaluation, it is necessary to conduct a comprehensive evaluation of the bidder's technical scheme and the bidder's technical plan according to the bid evaluation standards and methods in the bidding documents, and select the bidder who is most beneficial to the procurement unit.

After the bidding, the procurement unit will sign a contract with the winning bidder, Huai Noisy You, to clarify the rights and obligations of both parties and ensure the quality of delivery and service. In the process of performing the contract, the procurement unit shall supervise and inspect the performance of the winning bidder to ensure that equipment and services are provided in accordance with the requirements of the contract. Elevator equipment bidding and mechanical and electrical equipment bidding can be carried out together, but it is necessary to clarify the relevant requirements in the bidding documents, and select the appropriate bidder through the bid evaluation process.

Kiss you, is there anything else you don't understand<>

You can talk to the teacher in detail, and the teacher will better answer for you, guess the coincidence, <

Summary. Hello, I am happy to answer for you, can the elevator equipment bidding be tendered together with the mechanical and electrical equipment? Hello, elevator equipment bidding can be tendered together with mechanical and electrical equipment. Since the elevator equipment is a part of the mechanical and electrical equipment, the elevator equipment can be included in the bidding when the mechanical and electrical equipment is tendered.

This can improve the efficiency of tendering, reduce the complexity of the bidding process, and better coordinate the installation and commissioning of individual equipment. At the same time, the bidding of elevator equipment and mechanical and electrical equipment is also conducive to the unified management and supervision of the overall project, and ensures the coordination and cooperation of each equipment in the progress of the project.

Hello, I am happy to answer for you, can the elevator equipment bidding be answered with the mechanical and electrical equipment bidding answer; Hello, elevator equipment bidding can be tendered together with mechanical and electrical equipment. Since the elevator design is a part of the mechanical and electrical equipment, the elevator equipment can be included in the bidding when the mechanical and electrical equipment is tendered. This can improve the efficiency of tendering, reduce the complexity of the bidding process, and better coordinate the installation and commissioning of individual equipment.

At the same time, the bidding of elevator equipment and Qinghu bend mechanical and electrical equipment is also conducive to the unified management and supervision of the overall project, and ensures the coordination and cooperation of each equipment in the progress of the project.

Extended Supplements:1The tendering unit shall, according to the actual situation of the project, determine the reasonable scope of bidding and the principle of division, to ensure that the principles of fairness, justice and openness are implemented.

2.In the bidding documents, the technical requirements, quantity, quality requirements, and requirements of elevator equipment and mechanical and electrical equipment should be clearly described in detail, so that the best business can accurately bid. 3.

When the tendering unit reviews the bidding documents, it shall be evaluated in strict accordance with the requirements of laws and regulations and the bidding documents to ensure the selection of qualified suppliers. Therefore, elevator equipment and mechanical and electrical equipment can be tendered together, but the tendering unit needs to clarify the requirements for various equipment in the bidding documents, and conduct strict evaluation in accordance with laws and regulations in the evaluation process to ensure the fairness and brightness of the bidding process.

According to the provisions of the "Measures for Bidding and Bidding of Goods for Engineering Construction Projects":

Article 38 Two or more legal persons or other organizations may form a consortium and bid jointly as a bidder. After the parties to the consortium sign the joint bidding agreement, they shall not bid separately in their own names, nor shall they form or participate in the bidding of other consortiums in the same project; Otherwise, it will be invalidated. ”

Therefore, [entrusting the same elevator installation company with a "special equipment installation, transformation and maintenance license" at the same time should be suspected of participating in the bidding of two consortiums in the same project, which is within the scope of prohibition.

Generally, only elevator manufacturers or the manufacturer's only authorized bidders are accepted; **Bidders must provide a sole authorisation letter from the manufacturer for the project.

Generally, only one is allowed, and only one can be selected.

There are provisions in the bidding documents, and you'd better ask the bidding office?

952881793 welcome** specifics.

Shandong Swift Elevator can contact the following number if there is anything.

Hello! We're happy to answer for you! The key point of elevator bidding, in the final analysis, is these three management modules:

Time managementEffective time management can make design and production, procurement, and installation connect and synergize with each other. To do a good job in the time management of elevator bidding, we need to pay attention to these three items: bidding time, supply time, and installation time.

Bidding timeThe determination of the elevator bidding time, is it before the start of the project, or after the structure is capped? Since the elevator equipment is customized and the production cycle is long, the basic principle of determining the elevator bidding time is that it should be sooner rather than later, as far as possible in advance, and it is generally recommended to complete the bidding before the construction drawing design is completed after the completion of the plan and the initial approval. Because the elevator brand and type are different, the size of the elevator shaft is not the same, assuming that the main structure part has been completed after the capping, the elevator foundation pit, the shaft, and the machine room have been formed

a. The size of the hoistway is too large, resulting in a waste of construction area and increasing costs; The hoistway is small, and non-standard production may be required, thereby increasing the cost of elevators; The size of the hoistway is just right, which meets the requirements and the slip finger is clear without deviation. b. Whether the machine room adopts the traditional machine room elevator or the small machine room and machine room-less elevator needs to be determined in the scheme design. Compared with the machine room elevator, the machine room-less elevator has an advantage over the building with high appearance requirements, and will not destroy the expected façade effect because of the top-floor machine room, such as shopping malls and landmark buildings, most of which will use the machine-room-less elevator that does not affect the appearance.

Therefore, in order to control the known risk - the foundation pit, hoistway, machine room and elevator specifications do not match, it is necessary to determine the elevator scheme and manufacturer in advance, and the design department designs according to the elevator drawings and product technical specifications provided by the selected manufacturers, which can not only reduce the waste of space, but also avoid future project rework. The delivery time is generally the elevator delivery to the warehouse, and the rest is the installation of the letter. In the bidding documents to agree on the delivery time of elevator products, generally to consider three factors:

Elevator production cycle, free storage period, civil construction progress. The production cycle of elevator equipment is generally 3 to 4 months; According to the time of communication with the engineering department, the arrival time of the elevator equipment should be based on the fact that the building has been capped and the tower crane has not been dismantled. If before the capping, it is necessary to consider the problem of warehousing and storage, usually the elevator manufacturer will have a certain period of free storage, more than this time does not ship, the manufacturer will charge a certain fee; And after the tower crane is removed, the problem of secondary lifting will be generated, and it is not convenient for the elevator to be installed.

It is procurement. After an administrative unit used financial funds to build a new apartment for the elderly through bidding, it submitted the project implementation plan filing materials to the financial department for the procurement of elevators and call systems. According to the information submitted by the unit, the elevator procurement and call system procurement categories are both projects, with an elevator budget of 2.6 million yuan and a call system budget of 1.6 million yuan.

Through further understanding with the filing personnel of the procurement unit, the elderly apartment has been preliminarily completed, and the elevator and call system were not included in the original construction bidding.

When accepting the record, the author questioned that the elevator and the call system were filed according to the project category. Because the elderly apartment has been preliminarily built, now the elevator and call system are purchased separately, although it needs to be installed, but the procurement of elevator and call system hardware is the core of the project, the proportion of funds is very large, and its installation belongs to the additional services of goods procurement, so such as the royal code, the two purchases are more appropriate according to the type of goods for the record.

According to the provisions of Article 5 of the Regulations on Engineering Projects that Must Be Tendered, the procurement of important equipment, materials and other goods related to the construction of the project, and the estimated price of a single contract of more than 2 million yuan must be tendered and procured. Article 2 of the Regulations for the Implementation of the Tendering and Bidding Law of the People's Republic of China stipulates: "The term "engineering construction project" in Article 3 of the Tendering and Bidding Law refers to the project and the goods and services related to the construction of the project.

The term "slag" as used in the preceding paragraph refers to construction projects, including new construction, reconstruction, and expansion of buildings and structures, as well as their related decoration, demolition, repair, etc.; The goods related to the construction of the project refer to the equipment, materials, and materials necessary for the realization of the basic functions of the project, which constitute an integral part of the project. "In this case, the apartment for the elderly is a new project, the elevator is an inseparable part of the project and the equipment necessary for the realization of the basic functions of the project, and it is an important equipment related to the construction of the project, and the elevator procurement uses all financial funds, and the budget amount (contract estimated price) is more than 2 million yuan, and the procurement method of bidding should be adopted. The call system of the elderly apartment is mainly to facilitate the communication and management of the elderly, not the equipment to realize the basic functions of the project, and the budget amount is less than 2 million yuan, and can be purchased by means other than bidding.

Procurement. The elevator is the goods, the bidding is a form of procurement, the elevator bidding belongs to the procurement of goods, the elevator belongs to the more special goods, because he is not a complete finished product delivered to the buyer, is to be assembled at the buyer's site, and this assembly has a great impact on the quality of the elevator, safety, to undertake such a work, both manufacturing capacity and installation capacity and is inseparable procurement. The elevator is the goods, the bidding is a form of procurement, the elevator bidding belongs to the procurement of goods, the elevator belongs to the more special goods, because he is not a complete finished product delivered to the buyer, is to be assembled at the buyer's site, and this assembly has a great impact on the quality and safety of the elevator.

The elevator is the goods, the bidding is a form of procurement, the elevator bidding belongs to the procurement of goods, the elevator belongs to the more special goods, because he is not a complete finished product delivered to the buyer, it is to be assembled at the buyer's site, and this assembly has a great impact on the quality and safety of the elevator.