The phone can t enter the main interface, how to flash the phone

4.Go to Recovery (use the power off key + Volume + -, depending on the model, provided you want to flash into Recovery) and back up your phone's important data.

5.Wipe data factory reset

6.Select InstallZip from SDCARD

8.Once the installation is complete, select Restart your phone.

Conditions applicable to card swiping.

1.The clockworkmod program is already installed on the phone.

2.The phone can enter the recovery mode.

3.Of course, your flashing package is a zip

Line brush. The line brush is more troublesome, and each mobile phone is different, so you need to brush the tool and driver, plus a computer. I'll just talk about the general flashing process, please find the line brushing tutorial suitable for your mobile phone for the specific flashing process.

1.Install drivers (available in 64-bit and 32-bit versions).

2.Open the Flash tool.

3.Load the line brush packet.

4.Connect your phone and computer.

5.Wait for the flashing to complete and restart the phone.

2. You need to press the power button, and then press the volume down button. Remember to turn off the battery, and completely cut off the power, and the rest of the phones are like this.

3. When entering, press the power button plus the volume down button, and the power button plus the volume up button, both of which are different, because if it is simple, you need to enter the third-party REC.

4. Samsung's everyone is called the coal digging mode, boot button + volume down + home button, this is the one used by most mobile phones, and some use the boot button + volume down these two.

5. For the mobile phones used now, there are more and more models, so there are many different combinations, but basically they have not changed much, and the commonly used ones are the up or down keys of the power button + volume.

6. If you don't know much about mobile phones, it is recommended that if you want to flash the phone, you can directly use the flashing software on the current computer, as long as the mobile phone model is more common, it is basically possible.

To flash the machine, you need to press and hold the dual volume button twice, the first time is to press until the driver is successfully installed before you can release it, and you can't release it on the way. The second time, you can release it after the progress bar changes color. There is a tutorial in the flash package of the forum, so you can read it carefully.

If the smartphone is stuck in the boot animation interface during use, it is recommended to try to press and hold the power button for 12 seconds to force it to shut down, and then restart the phone; If your problem cannot be solved, please bring the purchase invoice, warranty card and mobile phone to the nearest OPPO customer service center for testing and processing.

If the phone can be turned on normally after restarting, it is recommended to optimize the phone as follows:

1. Uninstall the recently installed software to eliminate the incompatibility between the software and the system;

2. If the battery is fed, it is recommended not to completely deplete the power, and charge it in time if it is less than 20%.

3. The system is unstable due to system abnormality or root, flash the system as soon as possible to repair the system;

Hello, it's a pleasure to be able to answer with me!

Mobile phone flashing,Because the subject did not say the problem process in detail,I'll simply say it,Mobile phone flashing,Usually appears,The mobile phone system collapses,Or the software system is incompatible,Or the system version is too old,And you need to flash,Or reinstall the system,If the mobile phone can't enter the main page because of flashing or reinstalling the system。

First, it is because after flashing, the mobile phone needs to be activated, and on the activation page, you need to enter the account password that ran on the mobile phone before to activate, Apple's ID account, and Android's cloud account password.

Second, it may also be a hardware problem with the motherboard, which leads to activation failure and can't enter the main page (usually more Apple mobile phones).

Third, or the system version is too old, and the subject is restored to factory settings or erased and restored, and activation failure will also occur when activated. (This is also more apples).

In fact, the problem is very easy to solve, the above two need to find a mobile phone store or after-sales, one with three do-it-yourself ability can be solved by yourself, one can retrieve the account password in the official website, and the third can upgrade the system first in activation. Thank you.

In fact, in addition to the above problems and solutions, there will be a lot of problems, but they are not very common, so I will not list them. Thank you.

There is a problem with the Samsung phone flashing into the phone system by itself:

1. In order to understand and solve the abnormal problems that occur after flashing the mobile phone, it is recommended to send the mobile phone to the nearest Samsung service center for testing, and the service center will determine the specific problems of the mobile phone according to the test results and further deal with them.

2. Due to the risk of flashing, Samsung's official website does not provide flashing software, and it is recommended not to flash the machine by yourself. If there is a problem after flashing, do not operate it by yourself to avoid the problem from expanding.

Isn't it very common not to turn on?,The solutions are almost fixed 1.Detect whether you can enter recovery, you can enter third-party recovery and flash the machine directly in recovery mode.

2.If you can't enter recovery, can you flash recovery, can you flash third-party recovery, then flash into third-party recovery, and then follow step 1 to continue.

3.Can't flash recovery, find the way to flash the official firmware4Directly link to Qitu brush machine, use the line brush to save bricks function and brush back to the official system with one click5If the above four methods are not successful, it is recommended to go to the after-sales service or a professional mobile phone repair store for repair.

Different phones have different methods, Huawei is to install the power button and the sound button at the same time. You can flash your phone by the method.