-
Anonymous users2024-02-06Flashing is risky, please pay attention before brushing! However, for some flashing failures, the phone has become bricked, and it is not completely wooden!
Turn off the phone, and press and hold the volume up button + power button + home button at the same time to enter the recovery mode interface (of course, different models of Android phones, the button to enter recovery may be different, please check how your phone enters recovery first).
If the phone can still enter the recovery interface, then congratulations! Your phone hasn't been bricked completely, **official ROM, re-flash in recover mode.
If your phone can't enter recovery mode or your phone doesn't support TF card, then it can only be repaired by the official line brush tool, which is quite different from different mobile phones on different platforms, it is recommended to consult the official website of "Lightning Bee" or consult the "Lightning Bee" store that is closer to you.
-
Anonymous users2024-02-05This is mainly due to system instability and poor compatibility when upgrading or flashing, resulting in system crash or boot file corruption.
Try to solve it with the following method:
1. Restore factory settings.
1. Press and hold the volume down button + power on button at the same time in the shutdown state.
2. The boot interface appears, release it, and enter the recovery flashing tool for a while. Through the volume up and down, select wipe data, OK (the volume button is up and down, the power button is OK), the options appear, and yes.
3. Click Wipe Cache after returning to the menu until it automatically returns to the main menu.
4. Select reboot and reboot. Select Perform data purging and Cache purging, respectively.
Second, if the above methods can't solve the pretending state decision, it is likely to be a hardware problem, and it is recommended to find a maintenance and repair personnel to solve it.
What preparations are needed before flashing.
Necessary preparation - back up your phone data, data is priceless (you can use cloud services or phone backup software to back up).
If the Find Phone function is enabled, please turn it off in advance, otherwise you will need to enter the unlock password after turning on the phone (the flashing package will not have a password).
It is recommended to turn off the lock screen password for Android version and later, otherwise Recovery does not support decryption and may be garbled when reading the built-in storage.
This **ROM package has been tested by my real machine, and the function is normal and can be used with confidence, and it supports root authorization removal system verification.
Some functions require root permission, for a better experience, it is recommended that supersu set up to enable trust system users.
The device cannot be started due to the failure of flashing, the main reason is the flashing package, caused by operation problems, you can try to reflash other ROMs. >>>More
Hello! It is recommended that you try the following methods to see if it can be turned on: >>>More
If the mobile phone cannot enter the system page after booting up, and the screen is stuck or frozen, it is recommended that: 1Please press and hold the power button and the down volume button at the same time for more than 7 seconds to restart the device; If it is a mobile phone with a removable battery, please press and hold the power button for 8-10 seconds to restart the machine, if it does not work, please turn off the battery and reinsert it. >>>More
1.Try to restart the tablet;
3.Back up your data, factory reset attempt. >>>More
Your Huawei phone.
If you have been stuck in the boot interface but can't turn on, it is very likely that the phone has become bricked and there is a problem with the system, so it is recommended that you take it to Huawei's official after-sales service. >>>More