Mobile phone set up China Telecom fiber router?

If you use the optical modem to open the routing function to users, you can directly connect to the Wi-Fi network built by the modem through your mobile phone, then refer to the setting address on the bottom label to enter the router settings interface, then click the setup wizard, fill in the relevant content according to the prompts on the page, and save and restart.

Customer service 157 will answer for you. Handling 5G is one step faster, the traffic is half cheaper than 4G, the broadband speed is 500M, and it is convenient and fast to log in to the online business hall of Guangxi Telecom to handle broadband, number card, traffic package, etc. with one click.

The method of setting the password of the telecom fiber router with the mobile phone is as follows: 1. First, the mobile phone needs to turn on the wifi and connect to the wireless router to be set. 2. The next two steps are the same as in the computer, open the browser, enter the IP address of the wireless router in the address, such as, and then click "Enter".

3. Open the user login page immediately, enter the correct account and password, and touch "User Login". 4. After the account and password are verified, you will enter the background management page of the wireless router, and the first thing to display is the "Status" page and navigation link. 5. Select "Device Information", and then scroll to the bottom of the page to see the detailed "Basic Device Information".

6. Select "Ethernet Interface Information" and scroll to the bottom of the page to see the detailed network and client information. 7. Select "WLAN Interface Information" and scroll to the bottom of the page to see the detailed wireless network configuration information. 8. Set the required configuration information at the same time, continue to scroll to the bottom of the page, and select the "Save Application" button to save the configuration information.

9. Select "WAN Access Settings" at the navigation link, and then scroll to the bottom of the page to see "WAN" and "Network Information", and then "Save Application" after configuration (some routers cannot be configured here). 10. Then, select "User Management", scroll to the bottom of the page, you can change the account and password of the router background administrator in the "Access Control", and select "Save Application" after the setting is completed. 11. After all the settings are configured, you need to select the "Device Restart" link to restart the wireless router for the settings to take effect.

Hello, telecom optical fiber broadband cat users can not set their own, need to telecom installation and maintenance manager to set the parameters, please call telecom customer service for feedback processing, feedback will have staff to set the optical modem parameters, for more service discounts, please pay attention to "Anhui Telecom"***.

Setting up a wireless router on a mobile phone is not much different from setting up a router on a computer. It's just that because the mobile phone screen is small, when you use the mobile phone to enter the router settings interface, you will often encounter the situation that the talk volt display is incomplete, and you can drag and drop the interface with your fingers to observe the complete interface.

Run the browser of your mobile phone and log in to the router address to set it. When the wireless router is working properly, there is no need to change the settings. Here is an example of how to modify the settings of the commonly used wireless wifi.

Setup steps: 1. You can install a browser app on your phone, or you can use the browser that comes with the system. Here is an example of an "Internet" browser application that comes with a mobile phone.

3. Enter the common password: including the history of the admin.

4. After logging in to the management interface, select Wireless Settings.

6. In the "Wireless Network Name" column, you can modify the wireless WiFi name.

7. Pull the screen, and the password bar at the bottom can change the wireless wifi password.

8. Continue to pull the screen, click Save Settings at the bottom to complete the modification.

Here's how to set up a router on your phone:

1. First of all, connect the router Zhengmin Weiqi and the broadband modem with a network cable, and the connection method is to connect the LAN port of the broadband cat and the WAN port of the router through the network cable;

2. After the hardware connection is completed, use the mobile phone to connect to the wireless signal of the router, then open the mobile phone browser, enter the login address and login password of the router, and select Quick Settings after logging in to the background;

3. Then fill in the broadband account number and password according to the requirements of the training;

4. Then set the wireless name and password to save and then the router can be used normally.

There are two ways to do this:

The first method: install dial-up software on your mobile phone (ADSL's PPPoe software, there is proprietary software on your mobile phone), and then dial in after the mobile phone is connected to the wireless network, enter the username and password to surf the Internet.

Of course, the router needs to turn on the wireless and DHCP functions.

After that, other connected terminals will be able to access the Internet (including mobile phones) through the wireless router.

No, telecom wireless routers all use dial-up Internet access, and there is generally no dial-up software setting on the mobile phone, so it is recommended to add another wireless router.

1. First of all, connect the network cable to the router, turn on the power supply, and log in to the router management page.

3. Click [Network Parameters] - WAN Port Settings], then enter your Internet account and password, and then save.

6. Click [Wireless Network Settings] - Wireless Security Settings, set the wifi password, and then save it.

How to set up a telecom Tianyi broadband wireless router.

Step 1: Enter in the browser of your mobile phone, and enter your account and password after the login screen pops up.

Step 3: Set the IP address of the computer to any IP, the subnet mask is set, and the gateway can be set or not, but remember to change the network card settings back to the way of automatically obtaining IP after the route is set

Once you're all set, you're good to go.

The router is not set up. Let's start by setting up the router operation from scratch

There are two major parts to install a wireless router, one is the router connection, and the other is that the router and the computer are set up to connect the router wires first, and then set the computer's IP to be obtained automatically. The next step is to set up the router, open IE input Most routers are this network segment, you have to follow the manual) after entering the car will have an input account Mima, most of the router's account amdin Mima is admin (account Mima to be determined according to your manual) After opening the router, there is a setup wizard, click on the next step There will be several options, generally select "PPPOE (ADSL virtual dialing)" after selecting and click Next Here you need to enter the account number Mami ( That is, the broadband account Mima) After the input is completed, click Next Click Save, and start the router.

After the above is set, there is basically no problem with the network, so if you want to wifi, you have to set up Mima or open the router Point "Wireless Settings" in the point "Wireless Security Settings" on the right There is an option of "PSK password:" Enter Mima on it, save and then start from. The next time you are on wifi, enter this Mima into it and you can wifi.

1.Plug the broadband modem or home network cable into the WLAN port of the router, and then connect the mobile phone through the wireless network.

3.After entering the page, you will be prompted to enter the management account, which also needs to be found in the manual, and the general account password is admin.

4.Click the Setup Wizard, follow the instructions on the page to set broadband without PPPOE dialing, and enter the broadband account password.

5.According to the prompts on the page, check the box to turn on the WiFi network, and set the password, when finished, click Next, and the device will automatically restart.