Fibre modem with fast router setup

If your broadband has a cat, the wiring method should be: broadband home cable - > cat DSL port - > the router's line is plugged into the cat's LAN port - > computer (the network cable is plugged into the LAN port of the router).

The cat-to-router connection settings are as follows:

The first step is to connect the line according to the connection method between the router and the cat.

The second step is to enter the address you see on the router in your browser, which is usually.

Then enter,Enter the corresponding account and password,Generally, the newly bought admin is confirmed to enter the operation interface。

Since the address of the fiber modem and the wireless router is the same, it will cause conflicts, so you need to modify the address of the router, set the LAN port in the network parameters to modify the IP address as shown in the figure, click Save, and restart the router.

Step 3: Click on the setup wizard, click on the next step, enter the Internet mode setting, we can see that there are three options for Internet access, if your home is dial-up, then use PPPOE. Dynamic IP can be used by plugging the computer directly into the network, and there is a DHCP server on the upper layer. The static IP is generally a private line or something, or it may be a cell bandwidth, etc., and the upper layer does not have a DHCP server, or wants to fix the IP.

I chose PPPoE because I dialed. (It is recommended that you choose to let the router automatically choose the Internet access method).

If you choose PPPoe dial-up Internet access, you need to fill in the Internet account and password, which should be understood by everyone, and there will be an account number to open broadband, and it is OK to fill it in

Then the next step is to enter the wireless settings, we can see the channel, mode, security options, SSID, etc., generally SSID is a name, you can fill in as you like, and then the mode mostly uses 11BGNFor wireless security options, we need to choose WPA-PSK WPA2-PSK, which is so safe that it will not be hacked and rubbed by the network.

The next step is to set it up successfully.

Click Done, and the router will automatically restart, so be patient. The interface that appears after success.

Typing is not easy, such as satisfaction, hope.

The operation method of the optical fiber modem wireless router is as follows:

1. After powering on the wireless router, log in to the wireless line router on the mobile phone or computer, change the LAN port address of the wireless router to, save it, and restart the wireless router;

2. Connect the network cable from any LAN port of the fiber modem to the WAN port of the wireless router, and then connect the network cable from the LAN port of the wireless router to the computer, and the IP address and DNS settings of the local connection of the computer are automatically obtained;

3. Open the browser, enter, enter, enter the default login username and password of Tengda wireless router to enter the wireless router setting interface;

4. The next step of the setup wizard, the general household is to choose the ADSL virtual dial-up (PPPOE) mode, the next step, enter the Internet access and password provided by the network ** provider, the next step, set the wireless network name in the SSID box, select the WPA-PSK WPA2-PSK encryption mode, enter at least 8 digits of the wireless password, the next step, save, restart the wireless router to complete the installation.

The network out of the broadband cat is connected to the WAN port of the wireless router, the desktop is connected to the LAN port of the wireless router through the network cable, and the laptop searches for the wireless network signal connection of the wireless router.