Win10 is automatically repaired after repeated boot

Step 1: First, enter Safe Mode and remove the recently installed driver software.

Boot to WinRE (Windows Recovery Environment), which can be understood as recovery mode.

You can press and hold the power on button until the machine is powered off, then turn it on again, and then power off again, repeat 3-5 times until you enter the recovery mode as shown below.

From the Select options screen, tap or click Troubleshoot.

Tap or click Advanced options, and then select [Startup Settings], ., .,Select [Start], click the safe mode environment you want to enter, and in general, it is recommended to select (4) to enable safe mode.

Second, with the Auto-Repair feature, you can detect and resolve certain system issues that prevent Windows from booting.

To run automatic repair, follow these steps:

Boot to WinRE (Windows Recovery Environment), which can be understood as recovery mode.

You can press and hold the power on button until the machine is powered off, then turn it on again, and then power off again, repeat 3-5 times until you enter the recovery mode as shown below.

From the Select options screen, tap or click Troubleshoot.

Tap or click Advanced options, and then tap or click Automatic repair.

Auto-Repair will launch and attempt to fix Windows to prevent loading.

If the above still doesn't work, try restoring the system, or reinstalling the system.

Win10 system is automatically repaired after booting, which means that there is a problem with the system.

If the computer boots normally after automatic repair, it enters the system. This means that the repair was successful.

If the system cannot be entered normally after automatic repair, it means that the system has been damaged.

At this point, the problem can be solved by reinstalling the computer's system.

1.Another way is to solve it through the win10 command prompt function, repeating the first 2 steps of method 1 in the third step.

2.In the pop-up command prompt box, enter bcdedit, and you will see that you will find the name resumeo....

3.Next, type 'bcdedit set recoverye.' in the command prompt

4.Then type 'chkdsk r c: 'and press enter, and the system will automatically check for file system errors. The check is complete.

5.Before the computer restarts, it is recommended to run the system file repair command again to repair the files that may have been corrupted in the system.

Netizen's computer win10 system was on the verge of collapse a few days ago, and the boot has been repaired, and only by reinstalling the system can it be "**" ......

When the computer prompts that AutoRepair cannot repair the computer, you can try to restart the computer, enter safe mode, reset the computer, etc., as follows:

1. Restart your computer.

Generally, this problem may be caused by an abnormal shutdown. You can first try the [Restart] option in the automatic repair interface to restart the computer. If you are still stuck in the auto-repair interface, proceed to the next step.

2. Try to enter safe mode.

"Advanced Options" in the "Auto-Repair" interface goes into safe mode. If you can enter safe mode, please uninstall the newly installed new patch in safe mode, and then restart the computer again to see if you can enter the system interface normally. If you can't enter the safe mode, you still can't enter the win10 system interface normally.

Try the next step next.

3. Reset this computer.

In this case, select "Advanced Options", then "Troubleshoot" and "Reset this computer" and follow the steps, resetting this computer will erase all files.

Precautions for the usual use of the computer:

1. Turn on peripherals, such as monitors, speakers, printers, scanners, etc., in a strict boot order, and then turn on the power of the host. Power off the console before turning off external devices.

2. Frequent switching on and off will damage the life of the computer. Long-term driving accelerates the aging of computers. When not in use, use a screensaver, wait for the machine, or hibernate.

10 hours of continuous use. It's best to turn it off for 10-20 minutes before turning it on. Don't play with the computer all night, it's not good for the life of the computer, and it's also harmful to the body.

Enter the advanced mode, there is automatic repair and it cannot be successful, press the power button to restart 3 times in a row to enter the advanced mode. Click Troubleshoot, select Troubleshooter on the page, click "Reset this computer" and select "Keep files".

If this situation occurs, the system file has been corrupted, resulting in an incomplete system, so the boot system will automatically try to repair it, and if it cannot be repaired, it means that the system file has been irreversibly damaged. Some auto-repairs succeed and some fail.

There are basically three reasons for this:

The first is the last time you use the computer correctly, you accidentally delete or damage some system files. The system drives the faulty lamp.

The second is because the installed software or plug-ins are not compatible with the system and conflict.

The third type: it may be caused by the sudden shutdown of the computer or the freeze before the shutdown, resulting in disk damage, and the general boot repair is related to the improper operation before the shutdown, and there may be incompatible things; If you encounter a prompt indicating that the computer is being prepared for automatic repair, it is recommended to wait for the automatic repair of the system to complete.

Fourth, it may be that the system suffers from malware or computer virus, and the virus causes the system to malfunction.

Win7 for the second and third cases, you can press F8 immediately after booting up, and select "Last correct configuration" to enter the computer. If not, press F8 on the boot, select "Safe Mode", and delete the recently installed software and plug-ins after entering, and disinfect the virus.

For the first case, if you know what files are deleted, you can correspond to the missing files, and then enter the "safe mode" according to the second step, and fill in the missing files; If you don't know what system files were deleted, you can only reinstall the system.

Win10 "Trying to repair" will pop up a dialog box after failure,Press it immediately after booting,Press a few more times to restart to enter the security repair interface,Win10 system starts to the logo interface,Force restart,Repeat about 3 times,Until the troubleshooting is displayed,Click the troubleshooting to enter。

Don't just "reset this PC" to prevent loss of important files.

Skip can't skip.,Boot automatic repair is basically a system problem.,System file corruption, hard disk failure, virus Trojan damage, etc.,If you don't solve the problem, you can't enter the system.。

Hello pro,win10How to skip automatic repair1、Computer reboot 2、Enter the automatic repair interface after booting,Select advanced option 3、Select troubleshooting4、Select Reset this computer 5、Choose to keep personal folder6、Wait for the reset to complete。

If you are helpful to you, please help give me a like In addition, you can also click on my avatar to follow me, so that if you have any questions in the future, you can directly click on my avatar to consult me, thank you for your support, and look forward to meeting you again

Questions. Tried it, but it doesn't work.

Is there any other way?

Method 2: Select the Advanced Options box. Click the [Command Prompt] option and enter the login password to obtain administrator privileges.

Then enter: 1, bcdedit, enter, 2, copy the resumeobject behind the **[guid these**]. 3. bcdedit set recoveryenabled no.

Finally type sfc scannow to finish, just wait.

Questions. No, I can't.

Hello, if not, you can only use the system U disk to reinstall the system!

The computer boot has been stuck in the preparation for automatic repair, mainly because the computer's system files are damaged, resulting in the computer can not start abnormally, so the boot will show automatic repair.

There are basically 4 main reasons for this situation:

1. The computer mistakenly deletes or destroys the system files. Then the system needs to be reinstalled.

2. It may be caused by the compatibility conflict between the installed software or plug-ins and the system. You can force shut down 3 times, and then restart the computer to bring up the recovery screen - select safe mode - and then the computer will restart into safe mode, after entering safe mode, open applications and functions, and delete the recently installed software or plug-ins.

3. It may be that the system suffers from malware or computer virus, and the virus causes the system to malfunction. Force shutdown 3 times, then restart the computer will appear recovery screen - select safe mode - then the computer will reboot into safe mode, after entering safe mode, use security software to disinfect.

4. It may be a disk problem. You need to check the disk, and if there is a problem with the hard disk, you can replace it with a hard disk.

1.Open the installation software, select the boot USB flash drive interface, insert the USB flash drive on the computer, and click Make USB flash drive to start the production. 2.

Then you enter the interface of selecting the system, here you can see that there are various versions of the option, here take the windows10 home version of the 64-bit system as an example, and then click to start making. 3.To make a USB flash drive boot disk, you need to clear all the files of the selected USB flash drive, if there is data, then back up the files by yourself before starting to make, return to the production screen after the backup is completed, and click OK.

4.Next, start to carry out the system, at the same time, if you want to change a system, you can click to cancel the production, cancel the replacement, here**The system file is larger, you can wait patiently.

First of all, don't panic, there may still be a chance to enter the system. It is recommended to press [Restart] first to try to see if you can enter the system. If you are unable to access the system, please follow the steps below.

What should I do if I restart my computer and it still prompts automatic repair when it is turned on? For this case, then you need to follow the following methods to see if it can be solved. Can Safe Mode enter the system:

1.Click [Advanced Options] [Troubleshooting] [Advanced Options] [Startup Settings] [Restart] on the keyboard in the image aboveIf you can enter safe mode, clean boot, this is more thorough.

Reboot to test whether you can enter the system. Try System Restore: If you can't enter safe mode, consider whether you can restore your system through a system restore point

1.Turn off the computer completely (confirm the complete shutdown before operating), press the power button and immediately quickly click F11; 2.After entering the F11 interface, select [Troubleshooting] [Advanced Options] [System Restore]; 3.

When "Preparing for System Restore" is displayed, the Select Account screen will appear. Click on the account name and try it out this way.

It is well knownWin10 systemThere is an automatic repair function,This function can be very convenient to help us complete the detection and repair of some small problems,But recently, some friends have found that they have been stuck in the preparation interface when they use the automatic repair of the win10 system, but they will not move,So how should we solve this situation? Next, let's go with us to understand the specific operation.

Method 1: Reset your computer

1.First, repeat the computer restart screen until the diagnostic repair appears "Troubleshoot", and then we click to select it;

2.Next, we select Reset this PC;

3.Finally, we can choose to keep the file or delete the entire content, and click Initialize after the selection is completed.

Method 2: Reinstall the system

1.Detect the USB flash drive.

First we open"Fat claw installation master (U disk version)."and select one of them"USB flash drive mode", and then plug in the USB flash drive to the computer, and the software will automatically recognize the USB flash drive and display it in"USB flash drive device"column, and then click on it"Make a USB flash drive boot disk"；

2.Select the system.

Fat claw installation master will provide you with a variety of different versions of the system, we choose the corresponding system type according to their own needs (such as XP, win7, win8, win10), here the choice is win10 system, and then we select the version we need and click"Start making"。When the software pops up a prompt"This operation will delete the data on the USB flash drive", we need to make sure that the important data files in your USB flash drive have been transferred to the backup. Then click on it"OK"to proceed to the next step; Chiroscopic celebration.

4.Make a boot USB flash drive.

5.Made, done.

At this time, our boot USB flash drive is completed, click"Preview"You can preview the boot device, and we can confirm whether it is made successfully;

6.Preview the boot USB flash drive.

To preview the boot USB flash drive, press Ctrl+Alt to release the mouse.

7.Produced successfully.

Finally, at this step, congratulations, the USB flash drive has been successfully made! If you don't know the quick start button for your current computer, you can click it"A complete collection of shortcut keys"button to search.