How to breed duck foot wood? Cultivation method of duck foot wood

Plant the duck's foot in the soil, pour a small amount of water, and put it in a place where there is often sunlight. Watering every once in a while, the key is to have sunshine!

It likes semi-shade and can be viewed for a long time in a bright and well-ventilated home. If you have about 4 hours of direct sunlight indoors every day, it can grow well. Varieties with yellow and white markings, such as too weak light or partial application of nitrogen fertilizer, will blur their markings, thus losing their original characteristics.

The growth temperature is 15 25, and the minimum temperature in winter should not be lower than 5, otherwise it will cause the leaves to fall off. New leaves will appear the following spring.

It grows well in the environment of high air humidity and sufficient soil moisture, but has strong adaptability to the dry climate of the north. Note that the potting soil should not be short of water, otherwise it will cause a large number of leaves to fall off. Water should be properly controlled under low temperature conditions in winter.

Liquid fertilizer is applied every 1 2 weeks during the growing season.

Change the pot once a year in the spring, and if you use a plastic container, pay attention to drainage. The potting soil is prepared with peat soil, humus, perlite and a small amount of base fertilizer. It can also be used as a potted plant with fine sand.

Pruning does not need a large pruning, if the leaves below fall off, become a light pole, on the top half of the position to stubble, to promote its germination of new branches, the cut branches can also be cuttings, after rooting will become a new plant, if you don't want the duck's foot wood to grow too tall, you can wait to grow to 30 cm for a topping, that is, wipe the head, wipe off the buds on the top, and after a while will grow side branches.

1. Semi-shade maintenance.

Duck's foot wood prefers a semi-shady growth environment, otherwise it will make its leaves tarnished and unsightly. Therefore, in how to raise duck foot wood to raise well, it is necessary to provide semi-shade maintenance for it, so that it can receive an appropriate amount of sunlight for growth, and timely shade treatment in summer strong light.

2. Suitable temperature.

Although duck foot wood has a certain ability of low temperature and high temperature, it is still necessary to control the temperature at about 20 when maintaining duck foot wood to provide a suitable temperature growth environment. In winter, low temperatures below 5 should be avoided to prevent frost damage from affecting its growth.

3. Timely top dressing.

Usually it is necessary to carry out topdressing in time to provide enough fertilizer for the duck foot wood so that it can have sufficient nutrients to grow, and avoid the phenomenon of insufficient nutrients and leaves falling. Generally, it should be fertilized once in about 10 to 15 days during its growth period, and thin liquid fertilizer can be selected.

4. Pruning and shaping.

Duck feet grow very quickly and need to be pruned to maintain their good plant shape. The long branches are cut short, and the fallen branches and diseased branches are removed, so that they can grow in a well-ventilated environment and become more beautiful.

5. Reproduction methods.

1) Sowing and propagating.

Duck's foot wood can be sown and propagated, its seeds are hidden in the sand to germinate, and when the seeds are cracked, they are sown in the sand, and then covered with a layer of soil, and the temperature is controlled between 20 and 25, and the seeds will germinate and emerge after a week.

The leaves of the duck's feet are gradually turning into dry leaves, please help, what should I do.

The planting of duck foot wood should start from light, soil, moisture, temperature, pruning and other aspects.

1. Light. Duck's foot wood does not like the environment where the light is too strong, it is a semi-shaded plant, it only needs four or five hours of light a day, it can not be exposed, the sun is more abundant in summer, and it needs to be shaded by a way to do so, and when the sun is insufficient in winter, it needs to be moved to a sunny place.

2. Soil. Fertile and loose soil with deep soil is required, which can be prepared with a uniform mixture of humus soil or peat soil, pastoral soil or perlite to ensure that the drainage of soil socks is good and the soil air permeability is good.

3. Moisture. Duck's foot tree likes a well-watered environment, so it is necessary to pay attention to the soil during the growth period, the soil should be watered in time when the soil is dry, when the temperature is high in summer, the water evaporates relatively quickly, the number of watering in summer should be increased, but not too much watering, too much watering will lead to root rot, watering in winter is reduced, and the water temperature is close to the soil.

4. Temperature. The general growth temperature of duck foot wood is 15-25 degrees, below 5 degrees will cause the leaves to fall off, usually pay attention to ventilation, when the temperature is low in winter, you should pay attention to the duck foot wood to keep out the cold.

5. Pruning. The sub-account of the seedling stage only needs to prune off the overly dense branches and leaves and the branches and leaves that grow messily. In spring, pruning is carried out during the germination period, mainly by topping and combing, and the upper and bottom tips of the main stem are cut or removed, so as to inhibit the height of the plant type and promote the germination of new shoots of side branches.

Duck foot wood breeding methods, as follows:

Light: Duck foot wood does not like too strong light environment, belongs to semi-shaded plants. You only need four or five hours of light a day, and you can't be exposed to the sun, and the sun is more abundant in summer, so you have to find a way to shade it. When there is not enough sunlight in winter, it needs to be moved to a sunny place.

Soil: Fertile and loose soil is needed, which can be prepared with a uniform mixture of humus or peat, pastoral soil or perlite to ensure that the soil has good drainage and good soil permeability.

Moisture: Duck's foot trees prefer an environment with plenty of moisture, so pay attention to soil identification during the growing season. When the soil is dry, it should be watered in time, and when the temperature is high in summer, the water evaporates relatively quickly.

The frequency of watering should be increased in the summer, but not overwatering, too much watering will cause root rot, and in the winter watering will be reduced, and the water temperature and soil temperature should be similar.

Other methods

Temperature: The general growth temperature of duck's foot wood is 15-25 degrees, below 5 degrees will cause the leaves to fall off. Attention should be paid to ventilation at ordinary times, and when the temperature is low in winter, attention should be paid to the duck foot wood to keep out the cold.

Fertilization: Duck foot wood is mainly fertilized with a mixture of nitrogen, phosphorus and potassium, and if it is a mosaic variety, nitrogen fertilizer application will cause the patches on the leaves to be inconspicuous.

Pruning: Duck foot wood generally does not need to be pruned if the leaves are falling. Then the lower branches are lighter, and the upper part can be cut off, which will encourage the growth of new branches.

Duck foot wood breeding methods include light conditions, watering, soil poor environment, etc.

1. Lighting conditions.

Duck palm wood is suitable for a warm environment, so it needs certain light conditions, duck palm wood should be cultivated in a shaded and astigmatism environment, and duck palm wood can not accept strong direct sunlight.

2. Watering. Duck palm wood has a certain moisture resistance, to water it properly, keep the surrounding soil moist, generally in spring and autumn twice a week watering, autumn is drier, you can spray more water to maintain soil moisture, in the summer when the weather is hot once a day to water the omen, in winter the temperature is low, you can water less.

3. Soil environment.

The fertile and loose soil environment is suitable for the growth of duck palm wood, and the potted plants of duck palm wood can be prepared with a mixture of humus soil, garden soil and a small amount of perlite. You can also add some cake fertilizer to the soil, which can increase the fertility of the soil.

Precautions for duck foot wood breeding

1. Fertilization. Duck palm wood needs to be applied liquid fertilizer every two weeks, and from May to September, 20% cake fertilizer water needs to be applied twice a month.

2. Watering. Duck palm wood is drought tolerant and moisture-tolerant, and it is necessary to observe the moisture of the soil to determine how much water to water, generally watering thoroughly at one time.

3. Reproduction. Prepare the container, put tiles on the bottom of the container, fill half of the nutrient soil, and insert the healthy seedlings into the Chongqing rental soil. After that, put it in a semi-cool place, and after about a week, you can put it in the sun.

4. Pruning. Duck palm wood does not need to be pruned, and if the leaves are more severe, the leaves can be pruned off to promote the germination of new branches.

5. Potting soil. It is necessary to change the pot once a year in the spring.

Here's how to raise it:1. Soil: The soil prepared by mixing peat soil, humus soil and a little base fertilizer is suitable for its growth.

3. Watering: It likes a moist environment, and its leaves will grow dense when the water is appropriate.