What should I do if Lenovo S60 turns brick and can t turn on

1. The firmware number of the Lenovo S60-T line flashing ROM package is higher than the firmware number of your mobile phone (some mobile phones are displayed as the baseband number of the baseband version, which can be viewed in "Settings" - "About Device" and "About Mobile Phone"), otherwise after successful flashing, there may be system instability and other phenomena;

2. If you have accidentally brushed to the low firmware number version, it doesn't matter, if there is no problem, you can use it normally, if you can't dial **, often automatically shut down, etc., just re-use the line brush treasure to brush to the high version of the firmware number;

Connect the Lenovo S60-T, select the matching flash ROM package, and flash the machine.

2.A dialog box is displayed.

Before flashing, you must install the driver of the corresponding brand model, otherwise you will not be able to flash the machine. If you can't tell whether the driver has been installed, it is recommended to click "Yes" and tick "Don't prompt before quitting".

If you already have a driver installed, you can skip this step.

3.The driver update screen is displayed.

Novice users can follow the prompts. Before installing the driver, please close all irrelevant application software to avoid conflicts. Disconnect the connected phone at the same time to avoid the need to reboot after installation.

To complete the above steps, please tick the box "I have completed the above steps and agree to continue" and click "Next".

Flashing experts can click "Advanced Mode" and select the corresponding driver to update.

4.The driver is being installed.

5.The driver installation is complete.

6.Click "Done" to analyze the ROM package and connect the phone.

After the package analysis is completed, please manually operate the flash mode according to the real interface (the following figure is the demonstration figure) or the instructions in the following steps.

8.After entering the flash mode, it will automatically start flashing.

Flash the device successfully and share it with your friends.

The flashing success screen is displayed, and you can share it with friends.

Lenovo S60 mobile phone bricked can't turn on, it is recommended to connect the standard charger to charge for a period of time, press and hold the power button for 8 seconds, and then press and turn on the phone for a short time. Go to Lenovo Lewen Firmware Zone**Firmware package according to the tutorial to flash the machine, flashing is risky. If it is invalid, contact the after-sales site for detection.

We apologize for the inconvenience. If your device cannot enter the system with the fixed screen, we recommend that you perform a simple troubleshooting attempt by following the steps below:

1.It is recommended that you remove the back cover and battery and try to restart, if you can enter normally, it is recommended that you back up the body data and try to restore the factory settings;

2.If the above operations cannot be improved, it may be caused by abnormal system files or data loss on the device motherboard, and you need to flash and check the device. Due to the risk of flashing the machine and may lead to non-insurance, it is not recommended that you deal with it yourself, please take the time to go to the repair station and the engineer will assist you in testing and processing.

Of course, if you are willing to bear your own risk, it is recommended that you can go to the Lenovo Lewen bar firmware area to understand the firmware ** link and flashing method, please read the trade-off carefully, if you really can't complete it yourself, it is recommended that you refer to our recommendations to go to the Lenovo repair station to deal with.

Lenovo authorized maintenance site query maintenance site business hours are usually Monday to Sunday 9:00-18:00, the site will be slightly adjusted according to their own operation, it is recommended to call for detailed consultation when you go, please refer to it.

Problem type: system settings, flashing, connecting to a computer.

We apologize for the inconvenience. The phone suddenly does not turn on due to the following reasons:

1.The boot cable is not normal.

2.The battery-powered circuit is not working properly.

3.The power supply IC is not normal.

4.The system clock and reset are not normal.

5.The logic circuit is not normal.

6.The system software is abnormal.

Points 1 to 5 are hardware problems that require hardware repair; The sixth point is the system software problem, which can be solved by trying to reflash the system.

The reasons why Lenovo S6000 can't boot are as follows:

1. The machine is out of power;

2. The installed software is conflicting or contains viruses;

3. System problems or other hardware problems.

Solution: 1. Charge for half an hour and then turn on the machine to try it;

2. Uninstall abnormal software and disinfect virus;

3. Restore factory settings;

4. Directly send Lenovo for after-sales comprehensive inspection and warranty.

Dear Lenovo mobile phone users, hello!

Sorry for the delay in your use, if your Lenovo phone clicks the power button and does not respond and does not turn on, it is recommended that you use the following steps to make a simple troubleshooting attempt:

1.Caused by poor or abnormal battery contact: It is recommended that you reinsert the battery to restart the attempt, if you have other batteries, it is recommended that you replace them;

2.It is recommended that you use the standard charger to charge for about 30 minutes, and then press and hold the power button again.

If the problem still cannot be effectively solved, it is not ruled out that it is caused by the failure of physical buttons or related power management components, for your normal use in the future, we recommend that you take the time to go to a nearby Lenovo authorized repair station for specific testing and treatment.

Lenovo authorized repair site inquiry.

Dear Lenovo users, hello!

IDEA Forum:

Think Forum:

Lenovo Community:

Dear Lenovo users, hello!

Dear Lenovo users, hello!

According to the description, the phone does not turn on and use properly. It is recommended that you try to confirm and operate:

1. Whether it is caused by the battery being out of power, try to charge it for half an hour and then turn it on.

2. Remove the back cover of the phone, remove the battery, and then try to turn it on.

3. If the battery is charged, the boot has a response, and it is stuck in the boot interface and cannot enter the system normally.

This situation is more likely to be caused by a system abnormality (especially if you have flashed third-party firmware before, or if you have rooted the system). We recommend that you take the time to go to your local Lenovo after-sales service center and have an engineer help restore the system to use, or to check the hardware. You can log in to the official website to check the address:

We apologize for any inconvenience this may cause and affect your use.

If your device does not respond when you click the power button and does not turn on, we recommend that you perform the following steps to troubleshoot the device:

1.Caused by poor or abnormal battery contact: It is recommended that you reinsert the battery to restart the attempt, if you have other batteries, it is recommended that you replace them;

2.It is recommended that you use the standard charger to charge for about 30 minutes, and then press and hold the power button again.

Lenovo authorized repair site inquiry.