Xiaomi Note MIUI8 version The mobile phone always fails to correct the traffic, how to solve it?

1) First of all, make sure whether the "SMS Traffic Query Service" is enabled. Here take China Mobile as an example, sending the word "traffic" to 10086 will make you reply with "192" to query the traffic. After sending "192", if the "SMS Traffic Query Service" is not activated, you will be asked to reply "hfll" to activate it.

Activate after sending "hfll".

2) After successfully activating the "SMS Traffic Query Service", you can send "CXGPRS" to 10086 to correctly query the traffic usage, and the SMS sent by the MIUI background is "CXGPRS".

3) Go to the "Security Center" of MIUI - Network Assistant", click the "Traffic Correction" button below, and wait for a period of time to pop up "Traffic Correction Successful", as shown below.

4) If it still can't be corrected, it may be that the carrier is not set correctly. The setting method is: click the gear icon at the top right of the "Network Assistant" interface, then click "Correct Traffic Data" - "Automatic Correction Settings", set the "Attribution", "Operator" and "Brand", and select "Automatically Get Query Instructions" for "SMS Template", and finally save.

The flow rate is then automatically corrected.

5) If the above method still fails to calibrate, you can select "Manual Setting Query Instruction" under "SMS Template", fill in the correct content under "Send Number" and "SMS Content" (if you don't know what to fill in, you can call ** to the corresponding operator to transfer manual service to ask), save, and then it should be automatically corrected.

Because the SMS instructions sent by the phone to the SIM operator are incorrect.

Xiaomi phones. The failure to always correct the flow rate is caused by a correction error, and the workaround is:

1. Find the MIUI system on the Xiaomi desktop.

The built-in settings icon, then click to open, find [Other App Management], and click to enter.

2. After entering [Other Application Management], find [Network Assistant] (English: Data Usage), and click on it.

3. On the page, click Clear Data.

4. After the Qingjing Bureau removes the data, the notification bar will immediately receive a message from the network assistant (SIM card.

The traffic rate is not set**, do you want to set it? ), click in or go to [Security Center] to reset the traffic settings. Accompany the manuscript.

5. After the setting is completed, you will go to a page that shows how much traffic is left and how much traffic has been used, and then you can see that the traffic has been automatically corrected, and the system will prompt you to correct successfully or failed after the correction is completed. At this point, the flow correction is back to normal.

It is because the mobile phone has turned off the data traffic, so it cannot be corrected and used. Here's how to fix it:

1. First, open the settings indicated by the arrow on the desktop of your phone.

2. After opening the settings, click on the cellular network.

3. On the page that appears, select Cellular Data.

4. Next, TrustFiber sees that the cellular data is turned off.

5. After that, turn on Cellular Data and select Xiaomi Mobile.

The card number is sufficient. This is shown in the figure below.

Xiaomi phones. If there is no way to calibrate the traffic of the network helper, you can clear the cache data and re-calibrate it, and the square method is as follows:

Prepare materials: Xiaomi phone, network assistant.

1. Find and open the "Security Center" of your Xiaomi phone and <

2. You can see that there is a "Network Assistant" icon inside, click to enter;

3. On the page, click Clear Data.

4. After clearing the data, the notification bar will immediately receive a message from the network assistant (SIM card.

The traffic rate is not set**, do you want to set it? ), click in or go to [Security Center] to reset the traffic settings.

5. In the settings page you enter, see what you need to fill in, the first step is to fill in the attribution, operator, brand, and click the next step after filling in.

6. Then in the next step, fill in your own mobile phone card traffic**, monthly start date, daily limit, notification bar traffic display, etc., these are set by yourself, and click [Complete Setup] after filling in.

7. After the setting is completed, you will go to a page that shows how much traffic is currently left and how much traffic has been used, and then you can see that the traffic has been automatically corrected. At this point, the flow correction is back to normal.

Summary. Hello dear <>

Redmi MIUI14 traffic has been corrected inaccurately, and the solution is as follows1、First find the settings icon on Xiaomi's desktop,Click to enter the Xiaomi settings page。 2. After entering the mobile phone settings page, click on the setting item of Dual SIM and Mobile Network in the settings page. 3. In the mobile network settings page, click the setting item of traffic ** setting to enter the detailed settings page.

4. After entering the traffic ** setting page, first turn on the automatic correction function switch of the traffic rate, and then click the operator settings to fill in the operator information again. 5. Fill in the relevant information correctly on the operator information filling page, and click the "Save" button in the upper right corner to successfully modify the operator information after filling in, so that the calibration of the mobile phone can be carried out normally. 6. After filling in the correct carrier information, the Xiaomi mobile phone can automatically correct the traffic every day.

What should I do if the Redmi MIUI14 traffic has been calibrated inaccurately.

Hello dear <>

Redmi MIUI14 traffic has been corrected inaccurately, and the solution is as follows1、First find the settings icon on Xiaomi's desktop,Click to enter the Xiaomi settings page。 2. After entering the mobile phone settings page, click on the setting item of Dual SIM and Mobile Network in the settings page. 3. In the mobile network settings page, click the setting item of traffic ** setting to enter the detailed settings page.

4. After entering the orange change traffic ** setting page, first turn on the automatic correction function switch of the traffic rate, and then click the operator settings to fill in the operator information again. 5. Fill in the relevant information correctly on the operator information filling page, and click the "Save" button in the upper right corner to successfully modify the operator information after filling in, so that the calibration of the mobile phone can be carried out normally. 6. After filling in the correct business information, Shiwu Rent Xiaomi mobile phone can automatically correct the traffic every day.

Dear, part of the error is normal file seepage, because the operator's settlement traffic is not real-time, there will be a slight delay in shouting the draft. I wish you a happy life. I hope mine helps you