Wardrobe projection area calculation formula, how to calculate the projection area of custom wardrob

Calculated according to the projection area: refers to the calculation according to the projection area of the customized furniture (that is, the length x width of the door opening size), that is, "the projection area x the unit price of the projection area of the material = total**".

Because this calculation method is simple, it is often used to quickly get an approximate range.

Regardless of the total area of the building, the horizontal projection area is a fixed value. Assuming that when the sun is at its peak, the area enclosed by the shadow outer contour of the house falling on the ground is called its horizontal projection area.

In layman's terms, it means that the horizontal projection area is from top to bottom. For example, if it is a horizontal projection area, it means that no matter how high the shelf is, just calculate its projection area from top to bottom (that is, the floor area); If it's a vertical projection area, that's the projection area of that shelf on the wall.

The steps to calculate the projected area of a custom wardrobe are as follows:

The best time to measure the wardrobe is after the end of the bricklayer, that is, after the completion of tiling and ground leveling, such data is more accurate;

When measuring the length of the wardrobe, it should be noted that the position of the door switch is 150-200mm, this part should be reduced, and the remaining size is the length of the wardrobe; (Upper, middle and lower multiple measurements, some walls will have errors).

The height of the wardrobe is the size from the ground to the top, and the general wardrobe exceeds 2200-2400mm, and the top cabinet will be made on top;

The depth of the wardrobe is generally 550mm-600mm is the best, it is inconvenient to take things when the depth is too deep, and the depth is too shallow to be less than the width of the human shoulder, which is inconvenient to hang!

The projection area is the length of the wardrobe we measure multiplied by the height of the wardrobe, in the case of knowing the unit price, the projection area multiplied by the unit price, you can get the total cost of the wardrobe.

There are generally two calculation methods for custom-made wardrobes on the market today:

One is calculated according to the projection area of the wardrobe, that is, the length of the entire wardrobe multiplied by the height, and the projection area multiplied by the unit price can get the total price of the wardrobe, assuming that the length of a wardrobe is 3 meters, the height is meters, and the unit price is 600 yuan square meters, then the total cost of this wardrobe is 3 yuan;

The second is calculated according to the area. That is, the area of each face seen in the cabinet must be calculated separately, and then the area of these faces is added together to get the overall area of the cabinet. The unit price is multiplied by the sum of the area, which is the total cost of the wardrobe.

Use the area to calculate the total price of the wardrobe, the calculation method is more complicated, every surface involved must be calculated, as small as a layer in the wardrobe must calculate the area, and if two boards are used on the same side, the area of the two plates must be calculated separately; If you calculate it in terms of projected area, the calculation method is much simpler.

To calculate the projected area of a cabinet, you can calculate it by multiplying the length of the cabinet by the height of the cabinet.

If you calculate the ** of the cabinet according to the projection area of the cabinet, then you should multiply the length of the cabinet by the height of the cabinet, and then multiply it by the unit price of the cabinet to calculate.

If the length of the cabinet is meters, the height of the cabinet is meters, then the projection area of the cabinet is flat, and then as long as the projection area is multiplied by the unit price of the cabinet, you can calculate the cabinet **, but the door area of the cabinet is generally not included in the projection area of the cabinet, and the area is generally calculated separately.

Generally speaking, it is easier to calculate the projection area of the cabinet in a slotted cabinet, if the cabinet has a corner, that is, it is L-shaped, then when calculating the projection area of the cabinet, the cabinet should be divided into two cabinets to calculate, and then the projection area of the two cabinets is added together to be regarded as the projection area of the L-shaped cabinet.

The projection area algorithm of the wardrobe is very simple, which refers to the result of multiplying the width of the wardrobe on the wall by the height, which is the projection area of the wardrobe, and then multiply the unit price to calculate the wardrobe**. Here for example, there is a wardrobe with a width of 2 meters and a height of meters, **is 998 yuan square meters, and finally** is yuan.

Pay attention to the choice of this calculation method: if the merchant has adopted this calculation scheme, the consumer needs to ask the merchant whether it includes wardrobe sliding doors and accessories. Some businesses have some restrictions on the calculation of the projection area, such as the depth size of the wardrobe and the functional accessories.

Although this algorithm is relatively concise and straightforward, consumers must figure out whether to include wardrobe doors, whether to divide the upper and lower cabinets, etc., when customizing a wardrobe, so as to avoid the final result being much higher than the budget.

2. How to calculate the wardrobe area.

Area is often used in custom wardrobes, but the calculation method is more complicated, which is calculated according to the square of the plate used in the cabinet. When the merchant measures the size and comes up with the design plan, it is calculated according to the accumulation of all the plates. Then multiply the material area of the plate by the unit price of the plate of different thicknesses, and finally get the ** of the wardrobe.

Friends who choose area calculation should note: this calculation does not include some other functional accessories, such as fitting mirrors, drawers, lattice shelves, etc. are calculated separately, and the total price of the wardrobe includes the cabinet ** and wardrobe sliding doors and functional accessories**. Although the calculation method is more complex than the projection area, it is more transparent.

If you calculate it in this way, the merchant can't do anything on it, and you can use as much as you want. Consumers can choose the interior layout of the wardrobe according to their living habits, so as to control the budget.

Dear, I hope I can help you [smile].

1. The projection area is the length of the wardrobe multiplied by the height of the wardrobe. 2. The best time to measure the wardrobe is after the end of the bricklayer, that is, after the completion of tiling and ground leveling, such data is more accurate.

3. When measuring the length of the wardrobe, it should be noted that the position of the door switch is 150-200mm, this part should be reduced, and the remaining size is the length of the wardrobe. 4. The height of the wardrobe is the size from the ground to the top, and the general wardrobe will be made as a top cabinet after it exceeds 2200-2400mm. 5. The depth of the wardrobe is generally 550mm-600mm, it is inconvenient to take things when the depth is too deep, and the depth is too shallow to be less than the width of the human shoulder, which is inconvenient to hang.

6. The projection area is the measured length of the wardrobe multiplied by the height of the wardrobe.

Hee-hee] [hee-hee] [hee-hee].

If you need to calculate, you can upgrade the service.

Hee-hee] [hee-hee] [hee-hee].

The projected area is the length of the wardrobe multiplied by the height of the wardrobe. Length measurement: When measuring the length of the wardrobe, it should be noted that the position of the door switch is reserved for 150-200mm, this part should be reduced, and the remaining size is the length of the wardrobe (upper, middle and lower multiple measurement data, some walls will have errors).

Height measurement: The height of the wardrobe is the size from the ground to the top, and the general wardrobe exceeds 2200-2400mm, and the top cabinet will be made on top.

Depth measurement: The depth of the wardrobe is generally 550mm-600mm is the best, it is inconvenient to take things when the depth is too deep, and the depth is too shallow to be less than the width of the human shoulder, which is inconvenient to hang.

Summary. Hello Kiss is happy to answer this question for you. L-shaped wardrobe projection area calculation formula:

The projected area is the length of the wardrobe multiplied by the height of the wardrobe. Length measurement: When measuring the length of the wardrobe, it should be noted that the position of the door switch is reserved for 150-200mm, this part should be reduced, and the remaining size is the length of the wardrobe (upper, middle and lower multiple measurement data, some walls will have errors) Height measurement:

The height of the wardrobe is the size from the ground to the top surface, after the general wardrobe exceeds 2200-2400mm, the top cabinet will be done on the top Depth measurement: The depth of the wardrobe is generally 550mm-600mm is the best, the depth is too deep to take things, the depth is too shallow less than the width of the human shoulder, and it is inconvenient to hang Projected area is a noun that often appears in mathematics, referring to the area surrounded by the outer contour line of the shadow. Assuming that the sun is at its peak, the area enclosed by the shadow of the object falling on the ground is called its horizontal projection area.

In fact, in general, it is the area on the construction plan of the component.

Hello Kiss is happy to answer this question for you. The formula for calculating the projection area of the L-shaped wardrobe: the projection area is the length of the wardrobe multiplied by the height of the wardrobe.

Length measurement: When measuring the length of the wardrobe, it should be noted that the position of the door switch is reserved 150-200mm, this part should be reduced, and the remaining size is the length of the wardrobe (the upper, middle and lower multiple measurements of the collapse data, some walls will have errors) Height measurement: The height of the wardrobe is the size from the ground to the top surface, generally after the wardrobe exceeds 2200-2400mm, the top cabinet depth measurement will be done above

The depth of the wardrobe is generally 550mm-600mm is the best, it is inconvenient to take things when the depth is too deep, the depth is too shallow to make the manuscript smaller than the width of the human shoulder, and it is inconvenient to hang the hall and travel circle Projection area is a noun that often appears in mathematics, referring to the area surrounded by the outer contour line of the shadow. Assuming that the sun is at its peak, the area enclosed by the shadow of the object falling on the ground is called its horizontal projection area. In fact, in general, it is the area on the construction plan of the component.

Kiss. L-shaped solid wood wardrobe is calculated as area: the length of both sides minus the thickness of the wardrobe The height is the area.

Repeat the place.

How to calculate the area of overlapping places.

Pro, the overlapping part of the corner of the custom-made wardrobe is not counted. Some custom wardrobe merchants are counted according to the projection area.

Projection area algorithm: The wardrobe projection area algorithm is relatively simple, and many consumers understand it. The projection area of the custom wardrobe is calculated by multiplying the width of the wardrobe standing on the wall by the height of the projection area of the wardrobe, and then multiplying by the unit price of the wardrobe, then it is the wardrobe**.

For example, the width of a wardrobe is 2 meters, the height is meters, and the unit price is 998 yuan square meters.