How WPS Office is automatically numbered

Ordinal numbers are often used when using ** to enter data. ** It has a serial number, but its sorting effect is not satisfactory when it is printed. There is only one way to add an ordinal number, but there are two ways to sort.

One that doesn't sort automatically, one that sorts automatically. Each has its own advantages.

How to add sequence numbers that are not automatically sorted.

1. In the first position of the **serial number, enter 1, move the mouse to the lower right corner of the box, wait for the mouse pointer to become a black cross, hold down the left button and drag it down. Depending on the state of the mouse pointer, the corresponding functions are also different. Be careful, otherwise you won't be able to use the required features.

2. In the process of dragging, it is in this state, and after the number of serial numbers that meet the needs is met, release the left button. Look at the serial number on the left, the serial number we need is a few numbers smaller than it.

3. The serial number is generated. This method is suitable for ** with fewer serial numbers.

4. When the data in one row is no longer needed, after deleting, it will be found that the number of serial numbers is wrong. It is impossible to change the serial number one by one for the serial number, which requires the serial number to have the ability to automatically sort.

How to add an automatic sort of serial numbers.

1. Click to select the position of the first serial number, select "Find and Reference" in the "Formula" in the menu bar, click it, and select the "row" function in the pop-up window. If you want to understand the meaning of this function, you can select "Insert Function" in the blank space, click on the function name, and there will be a specific explanation below.

2. The input box in ** will appear in the content of the figure. Ignore the pop-up window, click on the input box and type -1 after the parentheses. The purpose is to make the entered serial number less than the value of the serial number that comes with ** by 1.

The number of ordinal numbers before 1 minus 1 is equal to how many, and how many are subtracted after the function. For example: **The self-set serial number is 3, the custom serial number is 1, and -2 is entered after the parentheses.

3. Confirm after entering the content.

4. The input box will become a number.

5. Select the input box where 1 is located, when the lower right corner of the input box becomes a black cross, hold down the left button and drag the mouse down, release the left button after the specified number of lines, and the serial number will be automatically generated. This method is suitable for ** with a large number of serial numbers.

Automatically sort and delete post-row effects.

1. **Continuous multi-selection: click Start**, hold down the shift key, and click End**. Behold, all are chosen.

2. **Single selection of multiple rows: click ** in front of the built-in serial number, select the entire line, hold down the Ctrl key, select other rows, the same is to click ** at the built-in serial number.

3. Delete multiple rows: On any selected row, right-click to bring up the menu and click "Delete". The selected line disappears. If you click on the serial number that does not come with the serial number when you select, a pop-up window will ask you to select the content you want to delete.

Both WPS and Office can be automatically numbered, and the recommendations are as follows:

First: to describe the problem in more detail, WPS and Office are just a general term for office software, including Excel**, Word documents, PPT presentations, etc.;

Second: it is best to illustrate with pictures to explain the effect you want to get clearly.

1. First of all, in the open document, click on the file in the upper left corner to enter the options in the tool.

2. Then in the window that opens, click on the left.

3. Then find the automatic number and click the check box in front of the option.

4. After canceling the automatic numbering, click OK.

In WPS, you can turn off auto-numbering in the WPS option, Procedure:

Take the WPS 2019 version as an example:

1. Open Text (Word document;

2. Click File - Options - Uncheck the "Type is automatically applied to the auto-numbered list" in the upper left corner.

Click "WPS Text" in the upper left corner, select "Options" in the file menu, and remove the check box for "Automatic numbering list while typing".

1. Click "WPS Text"--Options--

2. Remove the check box on the left side of "Automatically apply the automatic numbering list when typing".

Hello, glad to answer for you!

Click on the small black triangle next to "WPS Text" --"Options"--

Remove the check box to the left of "Automatically apply auto-numbering list as you type".

If you have any questions, please click on my avatar to ask questions. Have a great day!

Step 1: In the WPS interface, click "WPS Text" in the upper left corner, and the drop-down menu will appear.

Step 2: Click the "Options" button at the bottom right;

Step 3: In the "" tab, find "Automatically apply auto-numbering list as you type" and uncheck it.

Click the button for automatic numbering.

To get started - click on the number again.

You need to select the text content of automatic numbering first, open the numbering menu in the start ribbon, and select no option to cancel the automatic numbering function, otherwise it cannot be canceled.

1. First of all, in the WPS document, select the text content of the automatic numbering.

3. In the menu bar, open Start Options.

3. At this time, in the ribbon, turn on the numbering function.

4. Then in the numbering menu, select None option.

5. Finally, back to the document, the auto-numbering function is canceled.

1. First open WPS, select WPS Text - Options, enter the settings page or click the drop-down "Tools" to select "Options".

2. Select the "" tab in the pop-up dialog box, remove the checkboxes of "automatic numbering list when typing" and "automatic ring numbering" in the automatic numbering, and click OK.

Take the WPS 2019 version as an example:

1. Open Text (Word document;

2. Select the content that has been added.

3. Click Development-Number to cancel the content that has been set to the number.

In the WPS interface, click "WPS Text" in the upper left corner, and a drop-down menu will appear;

Click on the "Options" button at the bottom right;

In the "" tab, find "Automatically apply auto-numbering list as you type" and uncheck it.

WPS Text Tips 10 - Cancel the use of auto-numbering and format painters.

Open WPS, click "New" - "Text" - "Blank Document" to open a blank document, and enter a few lines.

Please click Enter a description.

Set the input to a first-level title and a second-level title (set up multiple headings for easy presentation).

Please click Enter a description.

Click on any of the first-level headings, click the "Numbering" drop-down box, and select a numbering style in "Multi-level Numbering".

Please click Enter a description.

After the setting is completed, we only need to add a new chapter, and when we set the title, the system will automatically number it according to the numbering style we set. Of course, it is also possible to set the numbering format separately for each level heading, but it is more time-consuming, so it is recommended to set multi-level numbering.

Please click Enter a description.

If the system's built-in numbering style does not meet the requirements, we can customize the numbering style, click "Number" - "Custom Number" - "Custom" to set the required numbering format according to the requirements.

Please click Enter a description.

Please click Enter a description.

Please click Enter a description.

After the setting is completed, open "View" - "Navigation Pane" - "Left" to open the document structure diagram, and you can clearly see the set number and document structure.

Please click Enter a description.

First, we open a word document.

Please click Enter a description.

Please click to enter a description of Closed Guess.

Click [WPS Text Car Destroyer] in the upper left corner, and select [Options] in the pop-up menu bar<>

Please click Enter a description.

In the pane that pops up, we select [].

Please click Enter a description.

In the Auto-numbering option, uncheck the previous check in the state circle.

Please click Enter a description.

Please click Enter a description.

Go back to our page and just continue.

Please click Enter a description.

The process for WPS to cancel auto-numbering is as follows:Tools Raw Materials: Dell XPS13-9350-3708, Win10,.

1. First of all, in the WPS document, Dayuan selects the text content of the automatic number.

3. In the menu bar, open Start Options.

3. At this time, regret the disadvantages in the ribbon and turn on the numbering function.

4. Then in the numbering menu, select None option.

5. When the pre-roll state is finally returned to the document, the auto-numbering function is canceled.

Here's how to cancel auto-numbering by WPS:Tools: HP Battle 66, Windows 11, WPS2019.

1. Select the text that WPS has automatic numbering.

2. Click File at the top left of the page.

3. After the menu bar appears, click [Options] on the page.

4. A new window will appear on the page, click [] on the page.

5. After the page switch, cancel all the checks under the automatic number and click OK.

Here's how to cancel auto-numbering by WPS:Tools: Lenovo laptop E460, Windows 10 system, WPS.

1. First, let's turn on WPS.

2. Select all the items that need to be unnumbered and right-click.

3. Then click on the bullet points and lap number in the menu carousel.

4. After that, click None in the upper left corner of the interface.

5. Click on the OK below after the most He Cave and it's done.