The hand is automatically integrated, does the car need to loosen the throttle when upshifting?

The hand is automatically integrated, and the accelerator does not need to be loosened when the car is upshifting.

Hand in one. A gearbox is a transmission device that combines manual and automatic transmissions. This technology is to improve the automatic transmission.

Resulting from economy and handling, it can return the timing of gear changes automatically determined by the computer to the driver, thereby improving the operability of driving and enriching the driver's experience.

The automatic manual transmission is a transmission method that combines the manual and automatic shifting of the car. This transmission incorporates an automatic transmission.

and the advantages of manual transmission, which minimizes the power loss of the transmission system. Because the manual transmission can freely adjust the gear and speed, it has a pleasant feeling of driving, full of sportiness and driving fun.

Proper use of the hand as one:

1. The origin of the gearbox: The manual automatic gearbox mainly refers to the mode and system of manual integration.

2. Automatic gear.

In fact, there is no need to step on the clutch shift technology, which greatly reduces the driving intensity, especially when the traffic is jammed. The advantages are that it saves trouble, has low requirements for driving skills, and can free up energy to deal with road conditions and improve driving safety. The bad part is that the life is shorter than that of the manual one, and the fuel consumption is 100 kilometers.

1 2 liters high, **expensive. Since the automatic shift mode is computer-defined, you need a manual function when you need more torque to increase the car's speed or ability to climb hills, and it can also be used to get a feel for flying and shifting gears (finding something to do for your right hand).

3. It is strictly forbidden to slide in neutral gear.

Handgear neutral makes the engine lose power, and at the same time makes the engine lose the ability to brake, so it is dangerous. In addition to the above factors, the most important thing is to overheat the gearbox and scrap it in advance (of course, accidental misoperation, a short time has little impact on the gearbox). In the same way, it is strictly forbidden not to lift the front wheel of the trailer, even if it is in N gear.

neutral) and lift the front wheels can only drag slowly within 50 km. In the same way, it is not advisable to push a cart. The handbrake must be used after parking.

In order to avoid the slope of the ground causing the car to slide and damage the gearbox.

4. How many forward gears and shift speeds? What gear to use for short stops? It is recommended to stop and wait for the time, and use D plus brake within 30 seconds.

No, you don't. d to d (+, no loose oil and no brake, to press the gear lock. After pushing it over, it is directly the gear corresponding to the D gear.

d (+, to d do not use loose oil without brakes, directly dial. After dialing it back, it will change to the appropriate gear in D gear according to the speed, torque, etc.

Manual automatic car shift skills and principles:

In fact, the S gear, the manual gear and the D gear are all forward gears, which are the same gears, but the S gear is a sports mode of the D gear, and the computer has changed when judging the upshift standard, while the manual gear is a manual mode of the D gear, that is, the computer determines that it will not automatically upshift. Therefore, it doesn't matter if the D gear is dialed to the S gear and manual gear, and it doesn't matter if you step on the accelerator or not, after all, they are all one gear, but the computer judges the different standards for upswinging and upshifting.

The specific method is to release the throttle before shifting gears - shift gears - watch the tachometer speed rise and fall after stabilizing, and continue to follow up the throttle. The principle is that in the process of gearbox shifting, blindly stepping on the throttle can only cause the speed of the inflated high, at this time to give oil, the work of the engine is not converted into power, and the manual neutral throttle is a principle, and once the end of the shift caused by the engine speed and the actual speed of the inconsistency, there will be a small impact, not good for the gearbox.

No, you don't. The automatic transmission car does not need any operation when driving, the vehicle will automatically select the appropriate gear according to the speed and traffic conditions, so there is no need to release the accelerator, only need to step on the brake to the end, adjust the gear to D gear (forward gear), the car will automatically adjust the gear according to the driving situation, do not need to release the accelerator according to the manual transmission, and then step on the clutch.

Automatic Transmission Driving Tips:

1. Limit starting.

When the engine starts, the automatic transmission puts some restrictions on the gears. The car can only be started if it is in P or N mode.

2. You can switch freely while driving.

You can freely switch gears while driving, as long as the gears that can match the current speed can be switched, and the gears will also be limited to the highest gear.

You can loosen the throttle. The automatic manual transmission is a kind of automatic transmission, but the function of manual shift is added on the basis of automatic transmission, and the two are not much different in nature.

The manual mode of the automatic transmission car is more convenient, just dial the gear directly to the manual mode, that is, the position of m, and there is no need to step on the brake or release the accelerator when changing to the manual gear. The manual mode of the gear lever is more common, that is, the addition and subtraction of the gear back and forth on the M gear, pay attention to the speed of the car, and the timing of the automatic shift is generally about the same. Generally, manual mode is used to shift gears, and the vehicle should be kept at idle or running.

With the development of the times getting better and better, buying a car has become our daily routine. But when buying a car, the first thing everyone thinks about is automatic transmission. Because the automatic transmission is convenient, and the automatic transmission car also contains a manual mode, but many people are not very good at using the manual mode, and there are even some people.

Some high-end cars are controlled by automatic transmission computers. As long as the driver controls the weight of the accelerator. And some cars, when switching to auto, are loose, but when switching to manual, they don't need to.

If you want to loosen the throttle, if you don't loosen it, you won't have that manual feeling, hehe.

There is no need to loosen the throttle, the deeper the throttle is pressed, the higher the speed of shifting, and a little back to the throttle can be changed, provided that it is at a certain speed.

The manual upshift operation of the automatic manual transmission and the manual transmission are the same reason, that is, according to the speed of the engine, the upshift timing is determined; In manual mode, when the vehicle brakes or decelerates, the transmission will automatically downshift, and the driver does not need to manually downshift, unless there is a situation that requires a forced downshift (such as speeding up and overtaking, etc.).

The manual automatic opening is manual, and you need to step on the accelerator to increase the driving speed before upshifting. The manual upshift operation of an automatic transmission is the same as that of a manual transmission, that is, the timing of the upshift is determined according to the speed of the engine. For everyday driving, upshifts are usually controlled between 2000-2500 rpm.

Of course, violent driving can increase the revs to 3500-4000 rpm.

When using the manual shift mode, you need to switch the gear lever to M or S gear, and then move up and down according to the situation. Regardless of the style of automatic transmission, the D and M or S gears are adjacent. When you need to upshift, push the gear lever in the direction of "+"; When it is time to downshift, push the gear lever in the direction of "-".

What does upshifting have to do with you stepping on the gas.

There is no need to step on the clutch and throttle during the manual mode switching, enough speed to upshift, you can just upgrade the manual lever of the gearbox by one gear, just like opening a manual transmission, but in the process, you don't need to step on the clutch and then shift gears, but directly push the gear lever.

The automatic transmission is a shoe friction transmission, which is automatically shifted by the computer according to the speed and power conditions. You just need to press the brakes and accelerator, and you don't need to change gears.

Manual self-integration: As the name suggests, "manual self-integration" is a transmission method that combines the manual and automatic shifting of the car.

Manual automatic gearbox, manual mode is actually on the basis of the automatic gearbox, add a simulated manual control, automatic state you just need to step on the brake and accelerator, manual case, the driver can be in the corresponding speed, judge whether to increase or reduce gear, according to their own wishes to add or decrease gears, of course, the gearbox transmission process is still automatic.

You can release the throttle. An automatic manual transmission is a type of automatic transmission, but it only adds the function of manual shifting on the basis of the automatic transmission, and there is not much difference between the two in essence.

It is easy to change gears in manual mode of automatic cars. Directly shift the gear to manual mode, which is the position of m, and you don't need to step on the brake or release the accelerator when you shift to manual gear. The manual mode of the gear lever is more common, which is enough to increase and decrease the gear back and forth in M gear.

Pay attention to the speed, which is generally about the same time as the automatic gear change. Generally speaking, if you use manual mode to shift gears, you should make sure that the vehicle is idling or driving.

Precautions for driving an automatic manual transmission vehicle:

1.When the user is reversing, step on the brake and press the electronic shift button on the gear lever at the same time to shift the gear to R, release the handbrake, and slowly lift the handbrake. If the car automatically reverses on flat ground, if it is on a steep slope, it is necessary to step on the accelerator slightly and reverse.

2.When the car starts, the key goes to ||position, the gear lever is moved to the n position. When only four gauge lights are on (vehicle self-test complete), apply the brakes, then start the engine and apply the brakes.

Press the electronic shift button on the gear lever to switch the gear to the D position, release the handbrake, and slowly lift the footbrake. The car will move forward automatically and then move on before refueling.

3.When you encounter a red light, if the time is less than 10 seconds, press the brakes, etc. If you press the brakes for more than 10 seconds, you need to move the gear lever to N gear, or you can pull the handbrake and wait for a longer time to protect the gearbox.

4.Note: Manual wide barriers are mostly suitable for climbing slopes and bad roads such as wind, sand, rain and snow to increase torque.