How can I connect my computer s main chassis to my TV?

1. Computer and TV connection: connect with VGA cable, but not at the same time in the monitor and LCD TV display, if you want to achieve simultaneous display, you need the support of VGA divider, or buy a graphics card with multiple output interfaces, this is relatively complicated;

2. The computer has VGA output, so that you can control the computer monitor and TV to display at the same time, or choose to turn on only one of them. In addition, there is generally an S terminal on the computer that can also output ** signals, but the clarity will be poor.

It's better to have a TV card! to be able to connect with the computer!

The LCD TV is connected to the computer host as a monitor, and it should generally be connected using a VGA cable or HDMI cable.

1、Schematic diagram of the interface on the back of the LCD TV:It can be seen that the left side HDMI interface and the right side VGA interface are available。

2. Schematic diagram of the output interface displayed on the back of the computer host: the HDMI interface is in the yellow box on the left, and the VGA interface is in the yellow box on the right.

3. HDMI cable schematic diagram: Insert one end into the HDMI interface of the TV, and the other end into the HDMI interface on the back of the computer host, and you can use it normally.

4. Schematic diagram of VGA cable: insert one end into the VGA interface of the TV, and the other end into the VGA interface on the back of the computer host, and it can be used normally.

The main computer cannot be plugged directly into the TV, and needs to be connected through another device.

1、Need**output interface:The host of the computer is usually equipped with VGA or HDMI**output interface,But TV usually does not support these two interfaces,So you need to convert it through other devices。

2、Need to connect equipment:You can connect the device,Such as adapter cable、Converter, etc.VGA or HDMI signal can be converted into the signal type supported by the TV,Then connect the output interface of the host and the adapter device,So as to transmit the **signal to the TV。

Expand knowledge:1、When using TV to connect to the computer host, you need to consider the problem of signal connection,At the same time, you also need to pay attention to the compatibility of the device,To avoid the incompatibility between the devices and the situation that can not be connected。

2. When connecting devices, you can consider using digital signal transmission equipment, which can take advantage of the advantages of digital signal transmission, such as high speed, stability, good picture quality, etc.

3. After connecting the computer host and the TV, you also need to make relevant settings to ensure the normal output of picture and sound. This may involve adjustments to various aspects such as resolution, frequency, color, etc.

The two can be connected, first of all, you need to prepare a VGA cable, a TV with VGA input and a computer with VGA output.

The computer host can be connected to the TV through HDMI, VGA and other interfaces, so as to cast the computer screen to the TV. Here's how to connect your computer and TV:

1. Connect via HDMI: If both the computer host and the TV support the HDMI interface, you can use the HDMI cable to connect the computer host and the TV. Plug one end of the HDMI cable into the HDMI port of the computer host, plug the other end into the HDMI port of the TV, and then switch to the HDMI input signal on the TV.

2. Connect via VGA: If both the computer host and the TV support the VGA interface, you can use the VGA cable to connect the computer host and the TV. Plug one end of the VGA cable into the VGA port of the computer host, plug the other end into the VGA port of the TV, and then switch to the VGA input signal on the TV.

It should be noted that when connecting the computer and the TV, you need to make sure that the resolution and frequency of the TV and the computer computer match the clock, otherwise there may be incompatibility. At the same time, it is also necessary to pay attention to prevent problems such as static electricity to avoid damage to equipment such as computer consoles and televisions.

1,LCD TV back interface:It can be seen that the left side HDMI interface and the right side VGA interface are available。

2. The output interface is displayed on the back of the computer host: the HDMI interface is in the yellow box on the left, and the VGA interface is in the yellow box on the right.

3. Plug one end into the HDMI interface of the TV, and the other end into the HDMI interface on the back of the computer host, and you can use it normally.

4. Finally, insert one end into the VGA interface of the TV, and the other end into the VGA interface on the back of the computer host, and you can use it normally.

First of all, let's look at what interfaces the TV has,GenerallyHDMIInterface,Then connect the computer host with HDMIItternactle,HDMIInterport can transmit** and audio signals at the same time。

HDML is directly connected to it,Then press the start key+P,Select copy、Expansion can be displayed on TV。

Is there a VGA interface or HDMI interface behind the TV,If there is, you can connect it to the computer,Then the remote control can be adjusted。

How the computer connects to our television.