The P10 phone does not turn on after restarting

1. Please charge the battery for half an hour before turning it on. When the system is turned on for the first time, the system performs an initialization operation, and it is normal for the system to boot slowly, please wait patiently.

2. Turn on the computer after factory reset or system upgrade.

After factory reset or successful upgrade, the system will initialize the device, slow boot is normal, please wait patiently.

If the screen stays on one screen for a long time when the phone restarts, press and hold the power button for 10 seconds until the phone vibrates and force it to restart. Please make sure that your phone has enough battery before upgrading and resetting factory settings, otherwise the upgrade may fail.

Since your phone doesn't turn on properly, forced upgrades and resets will cause your data to be lost, make sure you don't have critical data in your phone, or have made a backup in advance.

3. If it can't be turned on normally after using it for a period of time.

Make sure your phone is fully charged. When the phone is out of battery and may not turn on immediately when you just plug in the charger, please keep charging for a period of time before trying to turn it on.

If the boot is slow due to too many boot auto-start items, it will be mistaken for the inability to boot normally, so please prohibit the boot of the app that you do not need. If the problem persists, please contact customer service or bring the purchase invoice to the service branch for repair.

1.First of all, confirm whether the battery is low and does not turn on, please use the standard charger to charge, after a few seconds, the display screen will appear charging, and then charge for more than 2 minutes, press the power button to turn on normally.

2.Press and hold the power button to open the options menu, and tap "Restart". If it doesn't pop up, press and hold the power button until your phone vibrates to force restart.

Android phone can't boot normally How to deal with it:

1. Press and hold the power button for more than 10 seconds to see if you can force it to turn on. If you are able to turn on your computer, please back up your important data and perform a factory reset or upgrade to the latest software version.

2. If you can't force it to turn on, please check whether the phone has power, there will be a charging indication when plugged in to the power supply in the empty power state, and it may not be able to turn on immediately when it is just charged, please continue to charge it for a period of time before trying to turn it on.

Fourth, for the boot has a reaction, but does not enter the system, it is recommended to enter the recovery mode to restore the phone to the factory and try again (recovery mode entry method: press and hold the volume down + power button to turn on).

If none of the above methods can force the device to start, it is recommended to go to a professional mobile phone after-sales inspection and repair.

This ** mobile phone can't be turned on, you can only go to the mobile phone store to find this maintenance master for repair before, you can see at home whether the Fu Qi mobile phone is out of power, you can charge it, charged or can't turn it on, if you can only go to this professional search and seepage maintenance personnel.

First of all, check whether the power button of the Huawei P10 is damaged. If the power button is intact, please make sure your phone is fully charged, press and hold the power button, and try to force the phone to be re-energized. Long press the volume up button + power button to check whether you can enter recovery mode, if you can hold it, select "Factory Reset" format to repair.

If the forced restart does not turn on, it is recommended that you bring the warranty certificate to the nearest customer service center for repair. During repair, it may cause the loss of mobile phone data.

Check whether the battery is charged, the battery is out of power, the mobile phone naturally has no power to turn on, if it will not start no matter how it rushes, you can check whether the charging round electrical appliance is working, whether the interface is damaged, charge it with universal charging or detect the power.

It is recommended that you try the following ways to fix: restore the system and restore the factory settings will cause the user data to be erased, and the recovery system may cause the user data to be erased.

Is there no electricity, you fill the electricity and try again, if it doesn't work, give the after-sales service a ** regret to see if he respects Liang Youliang and has no way? Shortcuts and the like, if you can open the phone, you can only take the phone to the after-sales service.

Very high change of career Xing your problem. If there is a problem with the phone's internal motherboard, or it may be a problem with the battery of the phone, it is recommended to go to a nearby Huawei customer service center for maintenance.

Huawei P10 can't turn on, it is very likely that the mobile phone is faulty, please bring the purchase voucher of the phase search dust dismantling, and go to the local Huawei Shizao after-sales customer service center to enter the brother bureau for inspection and repair.

First of all, see if there is no power, after being fully charged, the lead will be turned on in the ear, if Jian Haoguo can not be charged normally or turned on normally, it is recommended to go to the mobile phone repair shop for maintenance.

If the Huawei phone won't turn on, there are many factors, such as the battery is short-circuited due to overheating, or the screen can't show anything.

The Huawei P10 phone won't turn on, usually due to the lack of battery on the phone, you can charge the phone for an hour before trying to turn it on.

If the P10 can't turn on, you should change your phone, because Huawei P10. I'm getting old.

If your phone automatically shuts down or restarts, please follow the steps below to troubleshoot the problem:

1. Check whether your phone has enough power.

It is recommended that you use the standard charger for more than 30 minutes before trying to turn it on. If the device still cannot be turned on, take the relevant proof of purchase to a nearby Huawei customer service center for maintenance.

2. Avoid touching the keys of the mobile phone by mistake.

It may be that the phone restarts by putting the phone in your pocket or bag and squeezing the power button, please pay attention to avoid squeezing the power button, if you squeeze it for more than 10 seconds, the phone will automatically restart.

It may be that you have unintentionally pressed the combination of the power button + volume button to enter a special mode and cause the phone to restart, in order to avoid this situation in the future, it is recommended that you check whether the keys are easy to get stuck, or the protective case you wear squeezes the buttons.

3. Use your phone at the right temperature.

If the temperature is too low or too high, the low temperature or high temperature protection function of the mobile phone will be triggered, resulting in automatic shutdown or restart. It is recommended that you try to keep your phone at an ideal temperature (0 to 35).

4. Check whether the timer is set to switch on and off.

5. Check whether the storage space is sufficient.

It may be that your phone has too many cache files and not enough memory. We recommend that you use Phone Manager to clear your phone's storage space in a timely manner and uninstall apps that you don't use frequently to keep your storage space sufficient (more than 20%).

6. Uninstall incompatible software.

Installing incompatible software through non-AppGallery channels may also cause your phone to shut down or restart, so we recommend that you back up your app data and uninstall the non-AppGallery** software before attempting.

7. Try a factory reset.

8. Still can't solve it?

If the preceding methods do not solve your problem, we recommend that you back up your data in advance (third-party applications such as QQ and WeChat must be backed up separately) and bring your purchase voucher to the Huawei Customer Service Center for testing.

Automatic restart,You see if he sometimes runs out of power.,If you say it's recharged, it will definitely restart.,In addition, there is a possibility that you have a problem with the phone settings.,It's normal for it to automatically restart.。

It is recommended to see if there is a timer to switch on and off in the settings, and if not, consider whether it was inadvertently pressed to restart. If that's not the case, then go to the shop and find a professional to fix it.

The problem of automatic shutdown of the mobile phone may be the wrong touch of the power button, or the power is insufficient, and the timing of the power on and off function is turned on, etc., to confirm whether the power button has been touched by mistake, you can press and hold the power button for more than 10 seconds, and the mobile phone will shut down and restart.

Possible causes: software conflicts, mobile phone poisoning, and low mobile phone versions.

Precautions for the use of the equipment:

1.Try to avoid using your phone in low, high, or large temperature differences.

2.Observe whether the buttons of the device are stuck, and the power button will be squeezed for more than 10 seconds, and the device will automatically restart.

If you are using a Huawei phone and your phone restarts automatically, try the following methods:

1.Clean up storage space.

It could be that there is not enough storage space causing low performance. We recommend that you use Phone Manager to clear your device's storage space and uninstall apps that you don't use often.

2.Incompatible third-party applications are installed.

If you have recently installed some incompatible applications through channels other than AppGallery, we recommend that you uninstall the application software and try it.

3.Try a factory reset operation.

It may be caused by an abnormal system software. It is recommended that you back up your important data and try it after resetting your device to factory settings.

Make an appointment for service. Repair spare parts** inquiry.

Boarding service.

Huawei Na Ta Jing P10 is a mobile phone with excellent performance, so do you know how Huawei P10 should be restarted when it crashes? Here's a guide to tell you the answer.

01 After the Huawei P10 crashes, since the battery is not removable, we can't restart the phone by removing the battery, and we can only reset the phone by entering the safe mode to use it normally.

02 We press and hold the power button and volume button of Huawei P10, and generally after more than ten seconds, we can enter the security mold of Huawei P10.

03 We use the volume keys to move the cursor, select Clear All Data and Clear All Cache, respectively, before saving the settings.

04 Finally, you can restart the phone, usually this reboot process will take a little longer than usual, and then the phone will return to normal and can be used.