How to get a Xiaomi phone that keeps restarting after flashing?

Try pressing the volume button on + off to enter the Shuangqing interface, perform Shuangqing and then restart.

Other methods:1. In this case, you can connect the mobile phone to the computer, and then use the flashing tool miflash software to flash the complete system package for the mobile phone.

2. If the connection to the computer does not respond or the flashing cannot be successful, it may be caused by hardware problems, such as battery failure, motherboard chip failure, internal circuit failure, etc., and you need to contact Xiaomi's after-sales service to test and repair the mobile phone to solve it.

Forced shutdown method:1. Press the power off button and the volume up button without letting go, and it will shut down and restart after a while.

2. Press the power button for ten seconds to automatically restart.

3. Press and hold the power button for a few seconds, and when the power is turned off, quickly press and hold the volume to add it, then go in and then select REC.

How to get the Xiaomi phone to restart all the time after flashing is as follows:

Re-flash the machine.

Take the battery out, press it back and try to restart.

Select Reboot to Recovery, find Clear User Data, and then re-enter the System Update interface. Click the Menu button and then click Select Package. Then find the installation package you imported into the memory card or start flashing.

It's OK after brushing.

Install Bell Pepper on the computer, connect the phone, select Root Crack, then select the ROM resource, ** and flash the ROM with one click. The flashing tool can be used with xiazaiba. ROM can be used with ROM Home, Flash Expert's.

If the screen is black,You can use other flashing tools,As long as you recognize the phone,You can flash the phone,It's really not good to go to the forum to learn the hotkey card brush,It's the boot key + volume plus or minus key,Select SD under the zip flashing machine。

The line brush method is now the main method of many bricks, so it has been liked by many people, but for novices, how to line the brush has become a very difficult problem, first of all, take the line brush treasure as an example, the usual process of the general line brush is:

1.Installing the Wire Brush Driver Package;

3.Enter the line brush brush mode.

What should I do if my Xiaomi phone keeps restarting?

Method 1: Reinstall the phone case.

When the Xiaomi mobile phone has the problem of non-stop restarting, then we can check whether the phone case is installed correctly, sometimes because the phone case is installed incorrectly, the phone case is pressed to the power button of the mobile phone, which will make the phone keep restarting, at this time we only need to reinstall the phone case, we can successfully solve this problem.

Method 2: Cool down your phone.

If you have been using your mobile phone to watch TV or play games, it may be that the mobile phone temperature is too high, which causes the mobile phone battery to start the automatic protection function, which will make the mobile phone enter the state of restarting, so at this time, we can first leave the mobile phone for a period of time, and wait for the temperature to cool down before turning it on, which can easily solve this problem.

Method 3: Clean your phone's cache.

Sometimes there are too many caches on the phone, which will cause too much load on the phone, which will not only cause the phone to run slowly, but also cause the phone to keep restarting because of the excessive load, so at this time, you can clean up the phone cache and restart it, which can solve this problem.

This article is based on the Xiaomi Mi 10 brand, MIUI12 system.

Hello dear. To solve the problem that Xiaomi mobile phones have been restarting, the operation steps are as follows: 1. Check whether there is a problem with the hardware:

1.Check if your phone's memory is full. 2.

Check if your phone's battery is normal. 3.Check if the temperature of your phone is too high before you get sleepy.

4.Check the phone's power socket for poor contact. 2. Check whether there is a problem with the software

1.Try clearing the cache data. 2.

Uninstall recently installed third-party software. 3.Check if there is an update on your phone's system, and try to update it to the latest version.

3. Try to restore factory settings:1Do it in your phone's settings.

2.Confirm if the issue is resolved after the phone has fully restarted. 3.

After a factory reset, you may encounter problems such as program crashes, software not working normally, etc., which can be solved by checking the software again if there is a problem. Since there are many reasons for Xiaomi mobile phone to restart, the above points are only some of the possible reasons. If you still can't solve the problem, it is recommended that Wang Shan take your phone to the Xiaomi service center for inspection and processing.