What should I do if the power indicator of my laptop is on, but it won t turn on?

The indicator flashes red, the problem is that the laptop is generally there, there are 4 indicators or 5 indicators, if your laptop is ASUS, from left to right.

1. The pattern that looks like a light is called the power status indicator: when the laptop starts, the power status indicator will light up and enter sleep mode in the laptop

mode, suspend-to-ram). When the laptop is turned off or goes into hibernation mode

mode, suspend-to-disk).

2. The pattern is like a battery in the middle of a current pattern, which is called the charging indicator: this indicator will display the battery power status in the following way.

Lights up: When connected to an external power source, the laptop's battery is charging. When fully charged, it is green, and when charged, it looks orange-red.

Off: When the laptop battery is fully charged or completely dead.

Blinking: When the battery power is less than 10% and no external power supply is connected.

3. The pattern is like a cylinder is the hard disk read and write indicator.

4. The pattern is like a generator is a wireless network indicator.

Next, these two will be different in the position of the computer according to the different models.

5. The pattern is like a lock, and there is a letter A in it, which is the letter key lock indicator.

6. The pattern is like a lock, and there is a number 1 in it, which is the number key lock indicator light, you can see what is wrong with your book according to this situation!

Answer, support me.

Hello, your question is not clear enough! Does the laptop CPU fan turn after you press the power button? Is there anything abnormal about the indicators of the notebook?

When you are not connected to the adaptive power supply, the power indicator of the laptop is not on, which is normal, and it will light up after turning it on! If the battery is low, the yellow light will flash, and after you plug in the adapter power supply, the power light will light up to indicate that it is charging, which is also normal.

What should I do if my laptop won't turn on after pressing the power button?

Power issues. Replace the power cord and battery.

In many cases, the power adapter or battery is damaged and the voltage is not stable. See if there is a power cord of the same model around, replace it and troubleshoot.

Memory issues. Plug and unplug the memory module, or replace the slot. Sometimes it can be caused by a loose memory module. If you have your own memory stick, it may also be caused by incompatibility. It can be resolved by changing the BIOS settings.

Dust issues. If the laptop is not cleaned for a long time, too much dust will cause static electricity or short circuit, especially in the case of dry weather in winter. You can find a hot air blower, disassemble the case, and blow it.

Summary. Dear, hello, the power light of the laptop is on but the reason why it can't be turned on is:1

Battery issues: If the battery is too low or the battery is aging, it can cause the laptop to not turn on. Try connecting your computer to a power adapter and charging it for a while before trying to turn it on.

2.Power adapter issues: If the power adapter is damaged or not working properly, it will cause the laptop to not turn on.

Try replacing the power adapter and confirm that it meets your computer's specifications and requirements. 3.Memory issues.

If your laptop's memory module is damaged or doesn't work properly, it will cause your computer to not turn on. You can try removing the memory module, cleaning the connector, reinserting the memory module, and then trying to boot it again. 4.

Hard drive issues: If your laptop's hard drive fails or doesn't work properly, it will cause your computer to not turn on. You can try to remove the hard drive, clean the connector, reinsert the hard drive, and then try to boot it again.

5.Other hardware issues: If other hardware components of your laptop (such as motherboard, graphics card, etc.) fail or don't work properly, it can also cause your computer to fail to turn on.

This situation is more complicated, and it is recommended to contact professional maintenance personnel for overhaul and repair. In short, if the laptop won't turn on, it is recommended to rule out common problems such as batteries, power adapters, memory modules, and hard drives, and if they still can't be solved, you can consider having them professionally serviced and repaired.

Is it okay to hit **?

Dear, hello, the power light of the laptop is on but the reason why it can't be turned on is:1Battery issues:

If the battery is too low or the battery is aging, it will cause the laptop to not turn on. Try connecting your computer to a power adapter and charging it for a while before trying to turn it on. 2.

Power adapter issues: If the power adapter is damaged or not working properly, it will cause the laptop to not turn on. Try replacing the power adapter and confirm that it meets your computer's specifications and requirements.

3.Memory issues: If your laptop's memory module is damaged or not working properly, the file vertical will prevent the computer from turning on.

You can try removing the memory module, cleaning the connector, reinserting the memory module, and then trying to boot it again. Cheating big 4Hard drive issues:

If your laptop's hard drive fails or doesn't work properly, it will cause your computer to not turn on. You can try to remove the hard drive, clean the connector, reinsert the hard drive, and then try to boot it again. 5.

Other hardware issues: If other hardware components of your laptop (such as motherboard, graphics card, etc.) fail or don't work properly, it can also cause your computer to fail to turn on. This situation is more complicated, and it is recommended to contact professional maintenance personnel for overhaul and repair.

In short, if the laptop won't turn on, it is recommended to rule out common problems such as batteries, power adapters, memory modules, and hard drives, and if they still can't be solved, you can consider having them professionally serviced and repaired.

Dear, sorry, we didn't**oh!

Here's how to deal with it:

1.Memory plugging and inserting method, disassemble the notebook to find the memory module, open the live buckle, remove the memory module, wipe it clean, put it back in and turn it on.

Discharge the battery, find the COMS battery in the notebook, press the live buckle, take out the battery, connect the battery to the positive and negative poles in turn for 30 seconds, turn it on, if it doesn't work, repeat it several times.

3.Hard disk cable, find the hard disk cable in the notebook, check if it is loose, and unplug the adapter port and insert it.

The memory module was not plugged in properly, and it was unplugged and reinserted.