What is fire detection, fire detection is equal to fire acceptance?

We only came into contact with the fire inspection not long ago, and the situation is similar to yours, and the company itself called us. Because I also needed to do testing later, I learned a little more about it. In fact, it is to help a company like us, an office building, or a hotel or the like, to do a fire protection system test to see if our entire fire protection system can operate normally, so as not to extinguish the fire in time when the fire really occurs.

It is different from the annual inspection of the fire department. The fire department just came to see what fire extinguishers we have here and the quality is not passable, and the fire inspection is to see the operation of the entire fire protection system. After this kind of company has done the test, it will issue us a legal and effective test report and go to the fire department for the record, this report is recognized by the fire department, so you can rest assured that we have only done it for a short time, and the testing company is not bad.

Recently, I have seen people on the Internet asking questions about fire detection, hey, in fact, a lot of people don't know very well, and we also understand it because we have been exposed to it. However, it is true that the new fire protection law was promulgated, so it is very unfamiliar. I hope it helps you a little.

Oh, by the way, that testing company is called Wuhan Xinke Zhongjian, there is their company's ** on the Internet, you can go and see it, it should help! I'm going to have to do it in the future anyway

The full name is the "Fire Acceptance Inspection Opinion", which is the basis for the acceptance of the fire department, and according to the law, there should be a unit with testing qualifications to conduct fire inspection. Moreover, it is necessary to think that the facilities and acceptance places must be tested before they can be fire-controlled.

It is mainly to do the inspection of automatic fire-fighting facilities, and provide the installation certificate of these facilities before the fire protection acceptance.

Upstairs, what do you do with ** Do you do fire inspection?

The differences are as follows:

Technical testing of fire-fighting facilities is a general term for technical services such as inspection and testing of fire-fighting facilities. It can be that after the construction of fire-fighting facilities is completed, the construction party entrusts the fire-fighting technical service agency to carry it out; It can also be the technical testing of fire protection facilities in the maintenance and management of fire protection facilities.

Technical inspection of fire-fighting facilities in the maintenance and management of fire-fighting facilities: fire-fighting facilities are inspected at least once a year. In case of major festivals or major events, arrange fire protection facilities inspection according to the requirements of the event.

At the end of each year after the fire protection facilities are put into operation, the key units of fire safety shall report the annual inspection records to the local fire protection agency for the record. The test objects include all fire protection facilities, systems, equipment, components, etc.

Fire Safety Assessment Score:

1. Regional fire safety assessment;

2. Building fire risk assessment;

3. Design and evaluation of building performance-based fire protection;

4. Fire safety assessment in crowded places.

The brief introduction is as follows:

1. Regional fire safety assessment: It aims to analyze the fire risk factors and the weight of their impact in the (urban) region, and propose effective prevention and control measures for different fire risks, so as to reduce the risk of urban fire.

2. Building fire risk assessment: through various means and methods, eliminate or reduce the unsafe factors existing in the building, prevent the fire in the building or in the event of an accidental fire, ensure the timely and safe evacuation of personnel, remedy the fire as soon as possible, reduce fire losses, and improve the safety of the building.

3. Fire protection design and evaluation of building performance: According to the use function of the construction project and the fire safety requirements, the fire safety engineering principles are used, the corresponding calculation and analysis tools and methods are adopted, and the fire risk is quantified and analyzed by the fire scene set in the building, and then the fire protection design scheme of the construction project is comprehensively analyzed and evaluated.

Determine whether the performance indicators of the building to resist fire meet the preset fire safety objectives, so as to optimize the fire protection design scheme. However, the design and evaluation of building performance fire protection has a scope of application, and it needs to be reviewed by experts in the end.

4. Fire safety assessment of crowded places: It aims to conduct a qualitative assessment of the legality of the occasion, the status of fire protection facilities, and the status quo of fire safety management, comprehensively grasp the fire safety level of such places, and carry out timely rectification for illegal and fire hazard places, so as to improve the overall fire safety level of crowded places.

It is not the same as that the fire inspection is a fire detection technical service organization with corresponding qualifications to test whether the fire protection facilities in the building meet the specifications and requirements of the specified indicators, and the fire protection acceptance is the comprehensive acceptance of the fire protection situation of the building by the public security and fire protection department, including fire protection facilities, plane layout, building structure, decoration, thermal insulation, etc.

You can't apply for acceptance without obtaining the fire protection facility inspection report, and the fire protection facility inspection is a necessary prerequisite for fire protection acceptance!

Summary. Dear, hello, I am glad to answer for you, the difference between fire assessment and fire detection is that fire detection is a general term for technical services such as inspection and testing of fire protection facilities. It can be after the construction of fire-fighting facilities is completed, and the construction party entrusts a fire-fighting technical service agency to carry it out; Technical testing of fire-fighting facilities can also be carried out in the maintenance and management of fire-fighting facilities.

Technical testing of fire-fighting facilities in the maintenance and management of fire-fighting facilities: fire-fighting facilities inspection shall be carried out at least once a year. According to the requirements of major festivals or major events, arrange fire protection facilities inspection.

The key unit of fire safety shall, at the end of each year, after the fire protection facilities are put into use, the annual inspection record shall be submitted to the local fire department for the record. The detection object includes all firefighting facilities, system equipment and components.

What is the difference between fire assessment and fire inspection?

Dear, hello, I am glad to answer for you, the difference between fire assessment and fire detection is that fire detection is a general term for technical services such as inspection and testing of fire protection facilities. It can be after the construction of fire-fighting facilities is completed, and the construction party entrusts a fire-fighting technical service agency to carry it out; Technical testing of fire-fighting facilities can also be carried out in the maintenance and management of fire-fighting facilities. Technical testing of fire protection facilities in the maintenance and management of fire protection facilities

Fire protection facilities are inspected at least once a year. According to the requirements of major festivals or major events, arrange fire protection facilities inspection. The key unit of fire safety shall, at the end of each year, after the fire protection facilities are put into use, the annual inspection record shall be submitted to the local fire department for the record.

The detection object includes all firefighting facilities, system equipment and components.

Pro, 1Regional fire safety evaluation: Analyze the weight and impact of regional fire risk factors (urban), and propose effective prevention and control measures for different fire risks to reduce urban fire risks.

2. Building fire risk assessment: through various means and methods, eliminate or reduce unsafe factors, prevent building fires or accidents, and evacuate personnel in a timely and safe manner, remedy the fire as soon as possible, reduce fire losses, and improve the safety of buildings. 3.

Fire protection design and evaluation of building engineering: According to the use function of the building and the fire safety requirements, the principle of fire safety engineering is used, the corresponding calculation and analysis tools and methods are adopted, and the fire of the building engineering design is comprehensively evaluated through the quantification and analysis of the building fire risk, so as to judge whether the fire prevention energy index of the building meets the predetermined fire safety objectives, so as to optimize the fire protection design scheme. 4：

Fire safety assessment, the legal fire protection facilities and fire safety management status of crowded places, carry out the evaluation of each item, grasp the fire safety level of the place, and rectify the illegal and fire hazards in a timely manner, so as to improve the overall level of fire safety in crowded places.

Legal analysis: Conduct a comprehensive inspection of building fire protection facilities at least once a year to ensure that they are intact and effective, and the test records shall be complete and accurate, and archived for future reference. The inspection of fire protection facilities is generally carried out by a fire inspection company with corresponding qualifications, while the maintenance company only maintains the building fire protection facilities and does not have the building fire protection inspection qualification.

Legal basis: Article 16 of the Fire Protection Law of the People's Republic of China Organs, groups, enterprises, institutions and other units shall perform the following fire safety duties:

1) Implement the fire safety responsibility system, formulate the fire safety system and fire safety operation procedures of the unit, and formulate fire extinguishing and emergency evacuation plans;

2) Configure fire-fighting facilities and equipment in accordance with national standards and industry standards, set up fire safety signs, and regularly organize inspection and maintenance to ensure that they are intact and effective;

3) Conduct a comprehensive inspection of building fire protection facilities at least once a year to ensure that they are intact and effective, and the test records shall be complete and accurate, and archived for future reference;

4) Ensure that evacuation passages, safety exits, and fire truck passages are unblocked, and ensure that fire and smoke prevention partitions and fire spacing meet fire protection technical standards;

5) Organize fire prevention inspections and eliminate fire hazards in a timely manner;

6) Organize targeted fire drills;

7) Other fire safety duties as provided by laws and regulations. The main person in charge of the unit is the person responsible for fire safety of the unit.

Blame me, blame me, I don't care about your feelings, and I miss your gentle stay At this street corner where there is no road, I don't know how to express the rain outside the window, and there is a moment when I want to dial your ** number, maybe it's cowardice, maybe it's contrived, anyway, you can't see how lonely I am now, obviously I said that after separation, I won't contact each other anymore.

Hello, happy to answer your questions. The difference between fire safety inspection and inspection is as follows: fire safety inspection refers to the fire safety hail technology detection and evaluation of buildings, places, equipment, etc., so as to find potential safety hazards and problems, and propose improvement measures to ensure fire safety.

Fire safety testing is a comprehensive project that includes the inspection and evaluation of buildings, electrical, gas, dangerous goods, etc. Fire safety inspection refers to the inspection of buildings, yards, equipment, etc. that have been completed and used to confirm whether their fire safety performance meets relevant standards and regulations, and whether there are potential safety hazards. In the fire safety inspection, the fire department will inspect the building, place, equipment, etc., such as checking whether the fire hydrant, fire extinguisher, evacuation channel, etc. meet the requirements, and put forward rectification requirements to the owner until the fire safety requirements are met.

To put it simply, fire safety testing is carried out before the construction of buildings, places, equipment, etc., and focuses on discovering potential safety hazards and proposing improvement measures; The fire safety inspection is carried out during the use of Jianxin Qifan buildings, places, equipment, etc., focusing on confirming whether it meets the standards and regulations and whether there are potential safety hazards.

The difference between fire safety testing and fire safety testing is that they have different emphasis. Fire safety inspection refers to a comprehensive fire safety inspection of buildings, places, etc., to find possible fire safety hazards, so as to take corresponding measures to improve and strengthen to ensure the safety of people's lives and property. Fire safety inspections, on the other hand, are inspections of specific firefighting equipment or firefighting systems to ensure the proper functioning and effectiveness of their firefighting equipment.

Fire safety testing usually includes the inspection of the building's fire protection facilities, fire passages, fire power supply, fire water sources, etc., as well as training and assessment of personnel's fire protection knowledge and emergency response capabilities. The inspection of fire-fighting equipment is to check the performance, function and safety of fire-fighting equipment to ensure that it can play its due role in the event of a fire. In short, fire safety testing and fire equipment testing are very important fire safety work, and their purpose is to ensure the safety of people's lives and property.

In practical work, we should carry out targeted testing and improvement according to the actual situation to ensure the effectiveness and reliability of fire safety work.