How to install the wardrobe sliding door correctly, how to install the wardrobe sliding door steps

Titanium sliding door.

It can also be called the Thai technology sliding door, which is a door that can be moved left and right and easy to install, in order to facilitate us to open, do not have to lock, and can block the air conditioning and odor, this titanium alloy sliding door is most suitable for us on the balcony at home.

Places such as toilets and so on, place this kind of titanium alloy. Although renovated.

We don't need to install it ourselves, but we have learned this simple technology, and it is convenient to repair it by ourselves when the sliding door is broken.

The choice of aluminum alloy door can choose the self-wide edge, indicating that the white point is to say that there is an aluminum alloy door sleeve in the bathroom.

of the outside. The inside of the bathroom is closed with bricks, and when the time comes, let the brick master post the distance of a brick, and then use the brick directly to close the door after the door is installed.

1. Installation step 1 of titanium alloy sliding door: track on the upper part of the sliding door.

The size of the box should be guaranteed to be 12 cm high and 9 cm wide. Like curtains.

Like the box, the track box is installed with a track, and the sliding door can be hung on the track. When the height of the door is less than a meter, it feels oppressive. Therefore, when making a sliding door, the height should be at least 195 + 12 = 207 cm or more.

2. Installation step 2 of titanium alloy sliding door: the size of the normal door is about 80 cm to 200 cm, under this structure, the door is relatively stable, and it is also very beautiful. Therefore, the ratio of width and height of the sliding door should be similar to the size of the sliding door.

3. Installation step 3 of titanium alloy sliding door: use the sliding door from the ground to the top with caution. Due to the excessive swing amplitude of the shift, the sliding door is easy to deform after a long time, and the door cannot be opened after deformation, which means that it cannot be repaired and cannot be used.

4. Installation step 4 of titanium alloy sliding door: when installing the titanium alloy sliding door, fix the upper track, use the gravity cone (hanging wire hammer) to hang 3 points at both ends and the middle point of the upper track and draw the point fixed surface with an oil pen on the ground, install the upper track, and then put a lifting hammer to the ground against the center point of the upper track.

Vertical lines should be placed at both ends of the track, and the lower track should be fixed at these 3 points, so as to ensure that the upper and lower tracks are completely parallel, and the movement of the sliding door is in the best state.

Speaking professionally: There are 2 ways to install it:

1. Flush door installation, inner brick closing.

2. Internal security, external wooden door cover.

The so-called titanium alloy sliding door, not all the materials of the door are made of titanium alloy, titanium alloy sliding door with titanium alloy as the door frame and the shape of the specification, in the middle can be installed glass, and mahogany.

All are very beautiful. This kind of material is very fragile, so when installing the titanium alloy sliding door, it is not recommended to install it alone, and you must find someone to help you hold it, in case its weight makes you unable to support it, which leads to the danger of falling off. Also, your material must be put on before it can be brushed.

Otherwise, it will get dirty during installation.

Wardrobe sliding doors are installed on rails.

When installing the track on the sliding door of the wardrobe, under the condition of installing the wardrobe, the sliding door of the wardrobe should lie flat, and the track should be placed in the middle of the door sleeve at the bottom of the sliding door at the bottom of the sliding door. Then use the upper track to draw out, draw out the hole that needs to be fixed with screws, and then drill the hole, fix both sides first, and then fix the middle part, that is, complete the installation of the upper track.

Wardrobe sliding door under the track installation.

Whether it is a new wardrobe or an old wardrobe will have a lot of dust during installation, before the installation of the lower track, wipe the door frame with a rag, and the position positioning of the lower rail is consistent with the method of appealing the upper track, and put the sliding door in the upper and lower tracks first, adjust the position, so that the sliding door can achieve the best sliding effect; Then fix the position of the lower rail, clean the inner layer of the rail with a brush, and finally tighten all the joints with a screwdriver.

Wardrobe sliding door installation.

The key point of this step is to put the pulley between the tracks, the sliding door roughly fits into the wardrobe door frame, and then slowly lift the sliding door to put the pulley into the upper track, and then lift the sliding door with one hand, and pull the sliding wheel with the other hand, so that the sliding wheel smoothly enters the lower track, and the sliding door is installed, and it is protected against the sliding door, and finally the anti-collision strip should be pasted at the sliding door to prevent children from bumping. The installation method of the wardrobe sliding door sliding track is these three steps, but it is relatively difficult to put the pulley, and it is better to have two people cooperate with each other to install it more easily.

1. Prepare aluminum alloy to frame, two lines, one at the top of the wardrobe and one at the bottom of the wardrobe. The upper part is wider and the pulley slides horizontally, and the lower part is narrower and the pulley slides vertically.

2. Then use an electric drill to drill an aluminum alloy wire at certain distances, and the left and right grooves are best drilled alternately.

3. Then use your hands to prop up a wide aluminum alloy wire, adjust the distance between the two ends and both sides of the cabinet, and then screw the screws.

4. The lower side is the same, due to the weight bearing of the lower part, you can screw a few screws less, only need to screw a few doors, and pay attention to the outer side of the upper and lower aluminum alloy wires should be close to the edge of the large cabinet.

5. Then the sliding door is vertical, with one end of the wheel facing down. First, the upper part is snapped into the slot, and then the lower wheel has springs. Break the wheel firmly until it can snap into the groove underneath.

6. After all sliding doors are installed, they can be adjusted to close them in an orderly manner. Because the slider wheel has springs, the height can be adjusted to control the height of the door. Finally, both sides of all doors can be on the same level.

The wardrobe is a piece of furniture that every family can't live without, with the wardrobe, our clothes will no longer be placed everywhere, all are placed in the wardrobe in an orderly manner. Nowadays, there are many types of wardrobes. There are sliding wardrobes, sliding door wardrobes, swing door wardrobes and open wardrobes.

Today I will introduce to you the installation method of the wardrobe sliding door track of the push-pull wardrobe, and the installation of the wardrobe sliding door track is a problem that many people are confused about.

Wardrobe sliding door track installation process

1. Upper track installation. It is necessary to place the track in the middle of the door sleeve, so carefully measure the dimensions of the 2 sides first.

2. Drill holes after positioning.

3. The two sides are fixed and the hole in the middle is drilled.

4. Install the lower track and wipe it clean first.

5. The position of the lower rail is positioned, and the sliding door is placed in the upper and lower tracks first, and the position is adjusted to make the sliding door achieve the best sliding effect.

6. Then fix the position of the lower rail, and clean the inner layer of the track with a brush.

7. Sliding door installation. First, lift the door gently to let the upper pulley of the door enter the upper track, and then lift the sliding door with one hand, and pull the lower wheel with the other hand, so that the lower wheel can smoothly enter the lower track.

8. The installation of the sliding door is completed, and the next step is to paste the anti-collision strip to protect the sliding door.

Wardrobe sliding door track sign introduction

1.Dinggu topstrong (Guangdong famous brand, Guangdong famous trademark, high-tech enterprise, Guangdong private technology enterprise, sliding door top ten brands, Zhongshan Dinggu metal products).

2.Sophia Sliding Door (started in 2001 in Guangzhou, Sliding Door Top Ten Brands, One of the Most Influential Building Materials Brands in South China, Guangzhou Ningji Decoration Industry Co., Ltd.).

3.Holike (Guangdong famous trademark, high-tech enterprise, Guangzhou famous trademark, one of the leading brands leading the development of China's overall wardrobe, Guangzhou Holaike Furniture).

4.Lami (founded in 2003, from the Canadian international brand, the top ten brands of sliding door sliding doors, Shanghai well-known brand, China's famous brand, Shanghai Lami door industry****).

5.Phukini Sliding Door (Top 10 brands of sliding door, focusing on the overall wardrobe Sliding Door, authorized design by Italy Puccini International Group, Pucciny Home (China)****).

Well, the above is the installation process of the wardrobe sliding door track introduced to you. Here, I would like to tell you that the quality of the installation of the wardrobe sliding door track directly affects the later use, and it may also be dangerous, so you must pay attention. Finally, I introduced the wardrobe sliding door track brand to you, and introduced five brands to you, which are all leading in the wardrobe sliding door track industry, so you can give priority to these kinds when choosing.

Wardrobe sliding bai sliding door installation steps:1. Distinguish and clean the main components of the sliding door and the installation location, DAO needs to be noted here.

Distinguish the upper and lower track boxes of sliding doors. Genus.

2. The general E-shaped track box on the market is above, using screws and other hardware accessories, fixed at the upper end of the wardrobe, and the surface of the wardrobe can be level.

3. The track box like a flat plate is the lower end, which is fixed about ten millimeters away from the counter surface, and the moving door is put in. The final step is to use a six-bar wrench to adjust the height of the wheel to level the surface of the wardrobe.

The installation of wardrobe sliding doors should be stable and easy to use, so let's talk about the methods and steps of sliding door installation.

1. Upper track installation. It is necessary to place the track in the middle of the door sleeve, so carefully measure the dimensions of the 2 sides first. Drilling after positioning; The two sides are fixed, and the hole in the middle is drilled.

2. Install the lower track and wipe it clean first; The position of the lower rail is positioned, and the sliding door is placed in the upper and lower tracks first, and the position is adjusted to make the sliding door achieve the best sliding effect; Then fix the position of the lower rail, and clean the inner layer of the track with a brush.

3. For the installation of the door, first lift the door gently to let the upper pulley of the door enter the upper track, and then lift the sliding door with one hand, and pull the lower wheel with the other hand, so that the lower wheel can smoothly enter the lower track.

4. Anti-collision protection, after the installation of the sliding door, the anti-collision strip should be pasted to prevent the impact damage caused by the back and forth push and pull to the door.

First, whether the thickness of the door panel is thick and the height is sufficient. It is best to choose a 10mm or 12mm thick board for sliding doors, which is strong, stable and durable; The slightly worse ones will choose the 8mm thick ones, which appear relatively thin and frivolous; Worse even use 6mm thick plates, which are easy to deform, and the stability is often difficult to meet the normal requirements, and the height of the door panel determines whether it can be decorated to the ceiling. Most of the fashionable wardrobes in European and American countries advocate the integrated effect of decoration, requiring a single plate to be more than one meter high and up to the ceiling.

Second, whether the door and frame are consistent and unified. The frame and door panel of the brand wardrobe cabinet door are from the same manufacturer, and the color and texture can be completely consistent and the supporting facilities are unified. The miscellaneous wardrobe is often patchworked, and can only find plates and borders with similar colors, which cannot be completely consistent.

Third, whether the wheels are smooth, pressure-resistant, wear-resistant, safe and reliable. The pulleys of the brand wardrobe are generally made of carbon glass fiber (international new high-tech material), with balls inside, with non-drying lubricating ester, so it can be easily pushed and pulled, smooth and flexible, and has a large load-bearing capacity, pressure resistance, wear resistance and no deformation. Household sliding doors generally require more than 60,000 pushes and pulls.

In addition, good pulleys are often designed with two anti-jump devices to ensure reliable and safe door sliding. The pulley guide is the core technical part of the sliding door, and it must be carefully chosen.

Fourth, whether the cabinet is professional and whether the design is scientific and fashionable. At present, the popular fashion wardrobe cabinet body, the design is very scientific and reasonable, often in accordance with the principle of "turning the whole into zero", several different cabinets have been developed, and they can be freely matched and combined when ordered; Moreover, drawers and movable shelves can also be freely increased or decreased, and the height can be adjusted at will, showing off their own style, showing their unique personality, and winning the love of DIY people. In addition, it also depends on whether the height of the cabinet can reach the ceiling and whether it can make full use of the space.

Fifth, whether the variety of cabinet doors and the color of materials are rich and diverse. Different consumption concepts correspond to different color preferences; Different colors create different decoration styles. At present, the main materials available for making sliding doors on the market are wood, glass, mirrors and some other special materials.

Some manufacturers have also launched a new type of plate with "one board and two colors", similar to the "color shell change" function of fashionable mobile phones. After a year and a half of use, you can also use it in another color, and you can enjoy the fun of "redecorating" a new feeling of life without spending any additional money.

1. Look at the edge sealing of the sliding door.

The edge of the sliding door will have a certain impact on the quality of the wardrobe, usually the edge of the edge is smooth and natural, looks relatively flat and compact, and is not prone to quality problems.

2. Listen to the sound of the pulley track.

At present, the sliding door wardrobe on the market adopts two sets of upper and lower pulleys, and the upper pulley mainly plays a guiding role and is installed at the top of the sliding door, but this is also a place where problems are relatively easy to occur. If the sliding door is noisy when pushing, the quality of this sliding door is relatively poor, and it is recommended not to buy.

1. Wardrobe pulley: Although the pulley at the bottom of the wardrobe looks very inconspicuous, if it is missing, the wardrobe may not move. Therefore, before buying a wardrobe, you should check whether the slide wheel is smooth, wear-resistant, and pressure-resistant, so as to ensure the safety and reliability of the pulley.

2. Wardrobe accessories: The sliding door wardrobe will be equipped with basic accessories such as rotating hangers, sliding mirrors, lattice racks, trouser racks, tie grids, etc. When purchasing a sliding door wardrobe, you should pay attention to whether the manufacturer has delivered these accessories, with them, your wardrobe can really play a supporting function.

The wardrobe is generally designed in the bedroom to store our clothes and be served, if.

3. Cabinet design: You should choose a wardrobe design scheme that can make full use of the space. Nowadays, some wardrobes can be freely combined when they are customized:

Drawers and movable shelves can be increased or decreased freely, the height can be adjusted at will, and even the length of individual cabinets can be adjusted, which can better adapt to different space conditions.

4. Thickness of the door panel: The wooden board used for the sliding door should have a certain thickness, so as to ensure that the cabinet door is strong, stable and durable. If too thin is used, the door will appear thin, frivolous, and easily deformed, with poor stability.

5. Cabinet door and frame design: The frame and door panel of the brand wardrobe sliding door are from the same manufacturer, and the color and texture can be completely consistent and unified. Moreover, there will be anti-counterfeiting marks on the cabinet doors and frames of brand manufacturers, and some enterprises with smaller production scales may not be able to meet these requirements.