I want to learn the flute and go there to learn, which master gives a big guide haha

Updated on delicacies 2024-03-22
10 answers
  1. Anonymous users2024-02-07

    Fingering with a barrel note of 5:

    Bass 5 press all in.

    Bass 6 is open for one hole for four, and hole for 1

    Bass 6 open two holes.

    Bass 7 with three holes.

    Alto 1 opens four holes.

    Alto 2 with five holes.

    The rest of the analogy is the same as the regular flute fingering.

    Full press 3 fingering:

    Bass 3 press all in.

    Bass 4 The first hole is half open, the others are fully closed, and Bass 4 is the first hole is fully open, and the others are fully closed.

    1, 2 holes, all others are closed, 5

    Bass 5 open.

    One, two, three holes, others are fully closed.

    Bass 6 open.

    One, two, three, four holes, all others are closed.

    Alto 7 open.

    1, 2, 3, 4, 5 holes, all others are fully closed, alto 1 open.

    1, 2, 3, 4, 5 holes, the 6th hole is half a hole, and the alto is 1 hole.

    One, two, three, four, five, six holes. Close the seventh hole.

    Alto 2 open.

    One, two, three, four, five, six holes. The seventh hole is half open, and the alto 2 is fully open.

    Other flute fingering analogies.

    Tube sound do 2 fingering:

    Tone name fingering.

    2: Press all the time.

    3: The little finger of the right hand is cut (the seventh hole).

    4: Ring finger opening in the right hand (open.

    7. 6 holes) 5: The right hand is fully open (open.

    Seven, six, five, four holes).

    6: Left ring finger opening (open.

    Seven, six, five, four, three holes).

    7: Leave the middle finger of the left hand with an opening (open.

    Seven, six, five, four, three, two holes).

    1: Open the index finger of the left hand, open the index finger of the right hand (open the first and fourth holes, and close the rest of the holes) treble 2 with alto 2

    Treble 3 is the same as the treble 6 (open three seven holes) as 5

    The treble 4 opens the second hole, and the rest is completely closed. (Use sparingly).

    Treble 5 opens two, four, five holes, and the rest is completely closed. (The band may use) other flute fingering and so on.

    Tube sound do 6 fingering:

    Tone name fingering.

    6: Press all the time.

    7: The little finger of the right hand is cut (the seventh hole).

    1: Cut the ring finger of the right hand (open.

    7. 6 holes) 2: The right hand is fully open (open.

    Seven, six, five, four holes).

    3: Left ring finger inhole (open.

    Seven, six, five, four, three holes).

    4: Split a half-hole in the middle of the left hand (open.

    Seven, six, five, four, three, two "half" holes).

    5: Open the index finger of the left hand, open the index finger of the right hand (open the first and fourth holes, and close the rest of the holes) treble 567 with the full press as 5 treble 456.

    Treble 1 closed 1567 holes and 2nd half holes, the rest are fully open, rarely used.

    Important:1When the big flute is solo, the body should be relaxed, the air flow should flow out slowly, the mouth must be fully opened, and the abdomen must be relaxed, but it must be "loose but not crossed, loose but not leaked".

    3.The breath and fingers must work closely together to produce good results.

    If you have learned the above flute fingering, you may wish to find some flute music scores to practice and see how well you learn.

    It depends on the fingering: all press to do 5 a month, all press to do 2 3 months, all press to do 2, all press to do 1 5.

    There is also the length of the breath and breath.

    It's better to ask a teacher.

    3 years to come.

  2. Anonymous users2024-02-06

    The best is of course the flute professor of the college, of course, amateur play, you can first invite the students of the flute major of the college to teach, it is very important to enter the door, you can follow the tutorial to learn by yourself in the future, participate in the exchange meeting of some flute friends, there are also flute flute chat rooms on the Internet, the flute exchange meeting held by the master, summer camp, etc., are all good ways, step by step, learn it steadily.

  3. Anonymous users2024-02-05

    You are from Shanghai, and I will introduce you to the teacher.

  4. Anonymous users2024-02-04

    Learning to play the flute requires patience, and if you can persevere, you will definitely be able to learn it. Unlike other musical instruments, the flute has a sound as long as it is played, beginners need to master the correct mouth shape and breath to blow the sound at first, as long as they take some time to master the skills of blowing the sound, and then learn the control of the damper, so that they can lay the foundation for self-learning.

    Beginner flute's mouth shape and damper:

    Mouth shape: When blowing, gently place the blow hole under the lip, cover about a quarter of the blow hole with the lower lip, open the mouth, relax, and gently blow the bamboo flute. To get the right mouth shape, you can take the following steps:

    1. Relax facial muscles; 2. Naturally purse the lips; 3. Lift the laughing muscles and lift the pressure points on both sides of the lips upward; Fourth, blow out the breath gently. Through these four steps, the correct mouth shape can be formed.

    Damper: (i.e., the space where the breath flows out between the lips, preferably oval), should be able to control the size freely. The size of the damper, coupled with the slow and rapid change of the air flow, can control the pitch and intensity of the sound.

    When the damper is in the treble area, it should be controlled small, and the bass area should be relaxed and increased accordingly. In order to control the size of the damper, the airflow changes slowly and rapidly, the cheeks and lips need to be relaxed and tightened. Mouth strength needs to be practiced to acquire.

  5. Anonymous users2024-02-03

    Self-study is okay, but I'm afraid that the mouth shape is wrong, and it will be difficult to change it in the future, so self-study must pay attention to the mouth shape and hand shape, as well as breathing!

    For flutes, beginners, 100 to 200 yuan, G key F key is OK!

  6. Anonymous users2024-02-02

    If you can learn, it is easier for you to learn, first of all, you must master the rhythm of **, which can never become an atmosphere if you don't learn it well. Playing the flute, tongue and fingering are important. Don't take the flute upside down when you're just starting out.

    I can't change it in the future, and I can't do anything about playing a solo piece. If the lips are too thick and the fingers are too short, it is better not to learn. However, it is still possible to relieve boredom.

  7. Anonymous users2024-02-01

    The simple and basic ones can be self-taught, but you have to wait until you understand the rhythm of the simple notation or something, because there is no professional guidance that you have some sounds that will not be clear, or there are a lot of small problems that cause you to change them in the future, and there are many technical knowledge that you need to tell the teacher to master. So it's best not to homeschool.

  8. Anonymous users2024-01-31

    You can learn by yourself when you get started, but when you reach a certain level, you have to learn some superb skills from the teacher, after all, it is very slow to practice on your own against the plate, and I am like this, it is difficult to go up to a certain level. It is recommended that you end up with the teacher.

  9. Anonymous users2024-01-30

    Hello, the flute is not very difficult to learn, you are a beginner, it is recommended to buy the E or F flute, these two flutes are very helpful for beginners to practice breath. The flute is divided into qu flute and bang flute, the flute in cd key belongs to the qu flute, the e key flute is between the qu flute and the bang flute, and the fgab tune flute belongs to the bang flute. The characteristics of the qu flute are that the appearance is relatively long, coarse, used to accompany the Kunqu opera, the timbre is rich and beautiful, soft and mixed, the sound of the Bang flute is characterized by a relatively high-pitched and bright tone, and its flute body is shorter, which is used to accompany the northern Bangzi opera.

    It can be a bit difficult for beginners to use the flute, which is more laborious, while the F or E key is easier.

    It is very important to learn the basic skills of the flute, if you are self-taught, you can go to the bookstore or ** buy some books, pay attention to buy the most basic, because the basic explanation of the basic knowledge is more detailed, first explain the knowledge of simple notation in detail, teach you to read music, and then talk about how to play the flute. The improved ones are relatively deep, and the basic skills are not explained, and the basic skills are not suitable for beginners. However, I do not recommend that you learn the bamboo flute on your own, because if you develop a wrong habit at this time, it will be difficult to correct it in the future, and it will affect the improvement of your playing level.

    Under the guidance of the teacher, you can first learn some basic skills, such as mouth shape, flute posture, articulation, and then breath exercises, including blowing octaves, long notes, etc., these basic skills are solid, and you will learn by yourself according to the book will be much easier.

  10. Anonymous users2024-01-29

    If you don't understand at all, then buy a book, learn the structure and characteristics of the flute, the posture should be correct, the fingers should know how to place, the most important thing is to be able to blow, as long as it is blown, it will be easy to do, the next step, know what the six holes on the flute are sound, practice the scale, then you can play some simple tunes, in fact, self-study is easy to go into the misunderstanding, learn simple basic music theory, very simple, there are five minutes to learn the simple notation on the Internet, find it,

Related questions
11 answers2024-03-22

The language is based on the platform, the C language is on the computer, and it is just right to make small software, and the C language teaching is mature, and the production of small software can be learned on the Internet, saving yourself time to ponder.

18 answers2024-03-22

In the southeast, northwest, and northwest, the cuisine is in Guangdong. >>>More

19 answers2024-03-22

You can go to a car beauty shop to learn, or go to a 4S shop. >>>More

8 answers2024-03-22

Seeing your question, it went back to me at that time, and I'm now a senior in college. >>>More

5 answers2024-03-22

Learning game design Game production is better than Wang's education. >>>More