-
If there are 2 colors in a grid, it means that there is a 3 4 stitch and a 1 4 stitch, usually this embroidery method is for better color transition. (It's not that you need to embroider 2 3 4 stitches, this should be noted).
In fact, you can look at it this way, look at a grid as 4 small grids, a grid is a 3 4 + 1 4 composition, when embroidering according to the color transition of the painting, the main color is embroidered into 3 4 stitches, and the secondary color is embroidered into 1 4 stitches. (This is a bit casual, and it doesn't have to be too rigid when embroidering, but according to the finished product I embroidered, it doesn't matter much which is more and which is less).
About 3 4 and 1 4 stitches, I think you can search on the Internet casually, there are a lot of ** teaching, I don't have many of them. However, it is a bit troublesome to embroider, and I hate embroidering 3 or 4 stitches, and my hands have to be pricked. Hope it helps.
-
There is this kind of embroidery, not a mistake, is a mixture of colors such as painting, will not see two different colors, as long as the embroidery when the thread is straightened out there are two colors of embroidery effect, cross-stitch has a picture is to mix the embroidery of the ......
-
You should decide based on the size of your fabric. For example, the ratio of the two colors of the line in the middle grid is: 1:2, that is, which line is more, then use two lines, and the color with less uses one line. I don't know if you're satisfied with this answer!
-
There shouldn't be such a problem, and if there is, it's wrong, just show it according to your opinion.
-
In the cross-stitch diagram, there are two colors in a grid, how to embroider?
Hello and dear are happy to serve you! This embroidery grid is just when the Kai shirt is divided by the blind hook edge staring cavity line, the different colors on both sides of the diagonal line should be embroidered with their corresponding embroidery thread "1 4 needles" (1 4 needle embroidery is composed of half of the diagonal) In the absence of hook edges, mixed embroidery should be used. That is, one side of the diagonal is embroidered with 1 4 needles, the other side is embroidered with 3 4 needles, and 3 4 needles are embroidered by a complete diagonal and half a diagonal to form the shape of the "person".
These two stitches form a complete grid.
-
There are two types of cross-stitch mounting, one is soft mounting, and the other is hard mounting. Hard-mounted period Qishang. Soft mounting:
As with the traditional Chinese calligraphy and painting mounting method, it is mounted directly on special paper. Features: easy to carry, easy to transport, suitable for collection, no matter the size can be rolled up and stored in a special tube.
When embroidering, the needle angle is short, and the workmanship needs to be particularly fine. The main disadvantage is that it is easy to shrink and deform under the influence of humid and dry baths, and the embroidery needs to be soaked with water in the framing process, and the silk thread used in embroidery has a certain gloss, and it is easy to make the silk thread lose its luster after soaking in water, thereby affecting the color of the embroidery. The framing time is long, it takes about a week.
Hard mounting: A common mounting method used in the process of framing cross-stitch now. After the completion of the ten field embroidery embroidery, the embroidered cross-stitch work is glued on the special thin wooden board directly on the bandage, and the grip is taken off after the glue is completely glued, and then the decorative cardboard is matched, and then framed.
Features: The color is not distorted, it is not allowed to be deformed when collecting, and the framing time is short. But large cross-stitch embroidery is not conducive to carrying.
-
If it's two colors that are separated from the top right to the bottom left, that is to say, one of the colors is pierced from the upper left corner and then embroidered to the center point, and the other color is pierced from the bottom right corner and also embroidered from the center point, and that's fine.
-
I think it's the "s" and"c"Half a stitch is embroidered, and the first grid is an example, as in normal embroidery, the "S" thread is first and then (but only half of the embroidery). Next"c"The thread is also embroidered first, and then the remaining half. Hope it helps
-
Is it ...... half-needle embroidery? s is the corresponding wire number, and c is the corresponding wire number.
It's not realistic to frame it yourself. Not to mention the technical problems, even if you know the framing procedure, but framing requires professional equipment such as corner cutting machines, nail corner machines, cardboard knives, etc., as well as many materials such as wooden lines and cardboards. With this set of things, the investment will definitely not be less. >>>More
Measured by the diameter of a silver dollar (one inch). If you have 14 squares, that's 14ct, and so on. 4 strands for 9ct large checker, 3 strands for 11ct medium checker, 2 strands for 14ct medium checker. >>>More
Imported good, imported DMC is the best, domestic bird of paradise is also OK, second only to the imported line, from the color. Glossiness. The texture is better than the domestic thread, the imported thread is not easy to break the thread, the domestic thread is embroidered unevenly, and it looks unbeautiful.
Tips to prevent cross-stitch thread fluffing:
1. First of all, don't buy cheap products when choosing cross-stitch embroidery thread, cheap no good goods, whether it is silk thread or cotton thread, poor quality is easy to fluff, ensuring the quality of embroidery thread is the most important. >>>More
This one can be completely DIY, it's not very complicated, and you only need one piece of software. >>>More