Why does my badminton string keep breaking?

Badminton rackets. Broken wire is related to the number of pounds, wire diameter, frequency of use and other factors, to prevent the line from breaking, pay attention to the following aspects:

1. Don't pull the tension too high, it is recommended to be less than 24 pounds. The higher the poundage, the easier it is for the thread to break;

2. Choose a string with a large line diameter, which is one of the most durable strings;

3. Don't use the racket too often, if you play often, it is recommended to change the racket every time, the higher the frequency, the faster the line will break;

4. Try to hit the sweet spot.

Several reasons. 1.The quality of the thread is not good.

2.If the pound is too high, the string will break (provided that the quality of the racket is very good, generally the racket is transformed first, and it is recommended for beginners to be about 20 pounds).

3.The edge of the racket rubs against the ground, and the thread is worn off (it is recommended to pick the ball by hand) 4The point of impact is always in the same place on the racket, and the ball breaks the string, which is not a bad thing and indicates that your level is relatively high.

In fact, it is very normal for the line to break, and it is a common occurrence for professional players 5If there is a problem with the method of pulling the wire, you can find someone more professional.

One of the easy to break the line is their own maintenance problem, such as exposure to the sun, put it in the trunk of the car, etc., the other is the way they hit the ball, and there is the injury caused by the stretching staff to the line in operation.

Buy some high-quality ones, and keep them for yourself, brush them with a dry cloth for a long time, and don't use them vigorously to avoid mold.

What type of wire are you using??? YONEX BG65? This kind of line is very good... Some lines are not suitable for the cold and dry weather of winter...

The badminton string is broken and repaired as follows:

Internal repair method: because the inside of the badminton racket frame is hollow, so this position can be placed to set the racket with the shaping material, the internal shaping material used to be aluminum alloy block, the appropriate long aluminum alloy block through forging, grinding, drilling, etc., the thickness and arc are processed to be suitable for placing inside the racket frame, and then use epoxy resin glue to glue and water to bond and fix the frame.

External envy correction method: the broken racket is directly repaired with the same line, which will show a convex part, which can be sanded, wrapped with carbon cloth in the polished position, mixed with resin glue, and then cured by condensation, hot blowing, etc. In this way, there is almost no imbalance problem, and the appearance is also very perfect.

The tension of the racket string is very high, and if the string is broken, it must be cut off at the first time, otherwise it will lead to the tragedy of deformation and even breakage of the racket. The principle of cutting the line is: cut the vertical line first when the horizontal line is broken, cut the horizontal line first when the vertical line is broken, the first cut starts to cut from the middle, and the second cut is cut in the balance position of the broken line, so that the line is cut alternately to keep the horizontal and vertical tension of the ball line balanced and released, so that it will not hurt the racket.

Generally speaking, the better workmanship of the feather cover sedan racket on the chord is more symmetrical, and the interval between each string, up and down, left and right, is the naked eye observation basically will not appear much difference, this can be slightly observed, and finally you can use your hand to gently pull each string on the opposite side of the string a few times, observe and feel whether each string is tied very tightly.

If your badminton string is prone to breakage, it may be due to several reasons:1Use low-quality threads:

Threads of low quality are prone to breakage. Try to choose the best wire material to reduce the probability of wire breakage. 2.

Pull the wire too tightly: Pulling the wire too tightly may cause the wire to break. Make sure the tension of the thread is moderate and not over-tightened.

3.Threads that have been used for too long: Thread materials can age over time and become brittle.

If you're using a cord that's been around for a long time, you may need to replace it with a new one. 4.Exercise too hard:

If you hit the ball with a lot of power or if you are doing high-intensity shot drills, the probability of a line break may increase. When exercising, pay attention to control the intensity and avoid overexertion. In order to reduce the situation of broken badminton strings, you can consider the following methods:

1.Buy high-quality thread: Choose the best thread material and try to avoid using low-quality thread.

2.Control the tension of the wire: Make sure the tension of the thread is moderate and not over-tightened.

3.Replace the cord regularly: Replace the cord regularly, especially if the cord has been used for a long time or if the thread shows signs of wear and tear.

4.Pay attention to your hitting technique and strength: Be careful to control the force of your shot and avoid overexerting force, especially when you are doing high-intensity shot training.

5.Storage and Maintenance: Store and care for your badminton racket and string properly to avoid hidden exposure to extreme temperatures or humidity.

Pro, hello Reasons and treatment methods for easy breakage of badminton strings: 1. Reasons for disconnection of badminton line 1Frequent use:

If you use it too often, the badminton string will break easily. This is due to the material of the badminton string, so try to minimize the number of times you use it during use. 2.

Improper use: Improper use is also one of the reasons for broken badminton strings. For example, when playing, the ball lands at the wrong point or is too strong, which will cause the badminton string to break.

3.Badminton string aging: After a long period of use, the badminton string will gradually age, and the material will gradually weaken, in this case, it is easy to break the string.

Second, the treatment method after the badminton string is disconnected: 1Replace the badminton string with a new one:

If the badminton string is broken, the best way to close it is to replace it with a new one. Choose the right badminton string and choose the right hardness and elasticity according to your usage habits. 2.

Adjust the angle and strength of the cable: When pulling the wire, pay attention to the angle and strength of the cable, try to keep it parallel and avoid excessive force. 3.

Pay attention to storage: When the shuttlecock is not in use, store it in a dry place away from direct sunlight and humid environment, which can prolong the life of the shuttlecock string.

The badminton string is broken and needs to be cut. The steps for trimming are as follows:

1.Oblique shear method.

The oblique cut method is to cut the line from the middle position in the direction of the diagonal to the frame.

2.Cross-cut method.

The cross shear method is to cut the thread outward from the middle position in the order of the outer spiral. Both methods are symmetrical from the middle to the outside, because the broken thread is normally in the sweet spot of the racket, so as to minimize the damage to the racket when the thread is cut.

If a vertical string is broken on the top side of the racket, the frame of the racket will slowly deform as the force on the racket is no longer balanced. At this point, you need to cut off a vertical line on the other side of the top of the racket, and then the racket slowly begins to change back to its original shape. Then start cutting the threads from the middle to the sides in order.

Please add a detailed explanation.