How to clean a manual razor, how to clean a manual razor blade

1. Clean up the manual shaver method.

Brush method: After each use, the razor should be used to clean the residual shavings and dander of the cutting edge and pores with a small brush, so as to avoid the curing of shavings and ** oil, and then hinder the movement and sharpness of the blade, so it is necessary to remove the debris remaining on the cutting edge frequently.

Washing method: The manual shaver can also wash the whole body of the machine, and it can also be rinsed with water to clean, but remember not to soak the whole manual shaver in water.

Skin care method: If you have a wet and dry razor, then on the basis of the full body wash of the razor, you can apply some shower gel, soap foam and other skin care products to shave together, which can not only clean indirectly**, but also have a very good beauty effect.

Wind oil essence method: every other week, brush the beard stubble on the razor and then drop a few drops of wind oil essence on the knife head, and then gently apply it evenly with a cotton swab, which can not only sterilize, but also its oily state will not make the blade rusty, and at the same time, there is no need to worry about allergies and other phenomena, so it is best to use wind oil essence to sterilize the razor.

2. Precautions.

The easiest thing about manual shavers is that the blades are rusty, and what we should pay attention to is to replace the blades frequently, don't be too troublesome, otherwise it is easy to "disfigure".

It is best to soak it with alcohol, or boil it with water, and the disinfectant can also be placed in the sun to dry, sterilization If there is no alcohol, rinse with water and then dry in the sun Sterilization is very important.

Flush with water, and you can also have a toothbrush.

1. Use your thumb to hold down the raised button on the head of the Gillette razor to remove the blade or knife holder.

Second, Chi Hu should use a small brush to brush left and right or up and down along the blade discharge regularity, and if there are more hairs, you can also brush a few more times.

3. Rinse directly under the faucet, or use a disposable cup to soak the knife holder in the cup.

Fourth, after cleaning, the blade and knife holder should be placed in a ventilated and ventilated place, dry, remember not too humid environment.

Fifth, after a period of use, it is necessary to change the blade and knife holder, and the blade and knife holder should also be replaced in case of rusty shed.

Manual shaver cleaning is important to ensure the sharpness of the blade and to extend its lifespan.

1. First of all, we need to detach the blade from the shaver movement, then put the blade in warm water, soak it in warm water for 5 minutes, and then put the blade in clean water to clean.

2. When cleaning the blade, you can use a professional cleaning agent or clean it with water, but be careful not to use a pencil, brush and other objects to rub the blade, so as to avoid damaging the surface of the blade.

3. After the cleaning is completed, wipe the water droplets on the blade with a towel, and then place the blade in a cool and ventilated place to wait for the blade to dry completely.

4. Finally, put the blade back into the shaver movement and complete the cleaning.

Proper cleaning of the shaver can effectively extend its lifespan and also maintain the sharpness of the blade, making it easier to use the rough guess.

Many men will use razors in their daily lives, and many times they will inevitably have dirt and bacteria in them, and cleaning has become a big problem, so how to clean the razor? Let me take you to find out.

1. If you are a blade-type manual shaver, be sure to pay attention to changing the blade regularly. After using the razor, remove the blade and use a cotton swab or brush to clean off the residue such as stubble attached to the blade, and wipe it with water or alcohol to ensure that the blade is clean.

2. If the shaver is used more than 3 times, be sure to soak the blade for sterilization. Soak the blade in alcohol, remove it after about 3 minutes, and wipe it clean with a cotton swab to prevent rust on the blade.

3. The cleaning of the electric shaver is even more important, because the knife mesh of the electric shaver is precisely designed, and the cleaning requires patience and care. If you use it more than twice, you should clean it thoroughly, dip a cotton swab in a little alcohol, wipe the surface of the knife mesh, and then wipe the inner knife mesh to ensure the cleanliness of the knife mesh. After cleaning the knife mesh, open the knife mesh, remove the stubble inside, and then use the same method to clean the inside of the knife head, but you must remember that you should not scrape it with a hard object to avoid damaging the body.

The above is the razor cleaning method I share with you, you can learn about it if you need it, I hope it can help you.

If you are using a manual razor, remove the blade, use a cotton swab or brush to remove residues such as stubble attached to the blade, and wipe the blade with water or alcohol. Electric shavers need to wipe the surface of the knife mesh key ridge and the inner knife mesh, and the stubble inside the knife mesh needs to be cleaned.

The shaver is a tool for shaving and seeping the beard, and the root burner can be divided into a safety shaver, an electric shaver, and a mechanical shaver according to the structure.

The head of the shaver has a rotary type and a reciprocating type, and the shape of the shaver has a straight type, an elbow type, a horizontal type, and a double-head type.

If the shaver is used more than 3 times, the blade should be soaked and sterilized, and the whole shaver should not be soaked in water for a long time.

1. Electric washable shaver cleaning. At present, there are two types of washable electric shavers on the market, one is partially washable, and the other is fully washable. For electric shavers that support partial washing, remove the lower knife mesh and other washable parts and rinse them directly under the faucet after use, rinse them and dry them off before installing them back one by one.

Remember, in particular, the place where the battery is installed and charged should not get wet, otherwise it may damage the shaver.

The shaver that can be washed with full body water is relatively more convenient to clean, and most of the current ** shavers, such as Braun's razor, almost all support full body washing. When cleaning this kind of shaver, you can directly pop out the cutter head, rinse the cutter head and grille, of course, the blade part does not have to worry about water, but it is recommended to dry the entire shaver after rinsing, and at the same time, in order to ensure the service life of the shaver, it is also recommended to regularly put some maintenance liquid on the shaver.

2. Automatic cleaning center. In addition to washing, in recent years, there has been another type of shaver cleaning mode, that is, the intelligent automatic cleaning center carried by the electric shaver itself, such as Braun shavers with CC series are equipped with automatic cleaning centers, which are more convenient to clean and do not need to be cleaned manually.

After using the shaver, directly into Braun's automatic cleaning center, you can quickly clean, disinfect, lubricate, and recharge the shaver with a single click, and the sterilization rate can be achieved with cleaning liquid, which is equivalent to using a new shaver every day.

3. Manual shaver cleaning. As the most traditional razor, manual shavers are small and easy to carry and flexible for shaving, so many people still use them. Manual shavers do not have electrical components such as batteries or circuit boards, so they can be washed with confidence.

After daily use, you need to take a small brush to brush off the beard and dander in the blade surface and crevices to avoid the growth of bacteria, in addition to washing the shaver frequently and sterilizing and disinfecting, you can wash the whole body or put it under the water pipe when washing, but try not to soak it in water for a long time. In addition to replacing the blade in time, the blade in use should also be sterilized with alcohol regularly.