What are the effects of using the refrigerator as soon as it is tilted?

When transporting the refrigerator, lifting upside down or tilting excessively, the lubricating oil will flow into the refrigeration system above the compressor and motor, which will hinder the circulation of Freon in the refrigeration system and affect the normal operation of the refrigeration system. Another point is that if the refrigerator is placed upside down, it will cause the decoupling of the shock absorbing spring in the compressor, and the refrigerator will not be able to operate normally.

How to maintain your refrigerator:

1. It is best to clean the refrigerator shell every day, and wipe the refrigerator shell and handle with a slightly damp and soft cloth every day.

2. Cut off the power supply before cleaning the inner tank and take out the food in the refrigerator.

3. Dip a soft cloth in water or utensils dish soap, scrub gently, and then wipe off the dish soap with water.

4. Remove the accessories in the box and clean them with water or detergent.

5. When cleaning the refrigerator's "switches", "lights" and "thermostats", please wring out a rag or sponge.

6. After the inner wall is cleaned, you can use a soft cloth dipped in glycerin (medical corkscrew lotion) to wipe the inner wall of the refrigerator, and it will be easier to wipe it next time.

7. Clean and wipe the sealing strip with an alcohol-soaked cloth. If you don't have alcohol on hand, wipe the sealing strip with 1:1 vinegar water, the disinfection effect is good.

After the refrigerator is turned upside down, it can be plugged in for about two hours, because when the refrigerator is upside down, the compressor is also upside down, and the refrigerant is not all at the bottom of the compressor, so it is best to wait for about two hours, and the refrigerant all flows to the bottom of the compressor before use.

I'm dizzy, so return it like this.

Yes. Uneven refrigerator has an effect on the refrigerator. As for the impact, it depends on the specific operating status of the refrigerator.

The compressor in the refrigerator refrigeration system is fixed and flexible. That is to say, there are rubber pads under the three feet of the compressor, and once the refrigerator is tilted, the compressor will also tilt, resulting in the suction and exhaust pipes connected to the compressor when the compressor is started and stopped.

Food that cannot be put in the refrigerator.

Bananas: If bananas are stored below 12 degrees Celsius, they will turn black and rot.

Fresh lychee: If the lychee is left in an environment of 0 degrees for a day, the skin will turn black and the flesh will become tasteless.

Tropical fruits: Due to the fear of low temperatures, it is not suitable to be placed in the refrigerator, if refrigerated, it will frostbite the fruit, making its surface sunken and black-brown spots, which not only loses nutrients, but also is easy to spoil. Unripe fruits should not be put in the refrigerator, otherwise it will be difficult to ripen normally.

The correct way is to store in a cool and ventilated place away from light.

Is it okay to put the refrigerator on an uneven floor and the refrigerator is a little tilted?

It is best to stand for more than 8 hours before starting the test run.

After the refrigerator is turned upside down, on the one hand, the refrigeration oil in the compressor will enter the refrigeration system, affecting the refrigeration effect; On the other hand, it is also possible that the shock absorbing spring of the compressor will fall off, causing damage to the compressor.

The purpose of starting the test run is to let the refrigerated oil of the refrigerator flow back into the compressor to prevent the refrigeration effect from being affected, and to check whether the compressor can work normally during the trial operation.

Precautions when transporting the refrigerator.

1. Before handling, cut off the power supply, take out all the food in the refrigerator, fix the refrigeration room shelves, humidor boxes and freezer drawers and other moving parts with tape, close the refrigerator freezer door and fix it with tape to avoid being opened when moving.

2. During transportation, it needs to be placed upright, and at the same time, it is necessary to prevent bumps and violent vibrations, and prevent rain and flooding.

3. When handling, the handling method can be selected according to the number of people carried. However, you should not grasp the door handle or exert force on the countertop and condenser, let alone drag on the ground, and you should lift your feet.

You can call after-sales service for at least two more years of warranty. However, there is nothing wrong with fluorine-free ones.

As long as nothing goes wrong, it's fine.

After returning home, you need to stand for another 12 hours before you can use it again.

Let it sit for two or three hours before turning it on.

Let it sit for two hours before turning on the electricity.

Look at the outer packaging of the refrigerator to see if it is written that the transportation should not exceed 45 degrees angle, if it is written, you should write an endorsement when you sign it, and ask the porter to sign, in case there is a problem with the compressor part in the future, you can find the merchant to claim.

If the porter is unwilling to write an annotation, he can call ** to find a salesman at that time, tell the current situation, and ask for a promise to make an annotation on the receipt form.

You also have to write a record of the situation and ask the porter to sign it. Or simply ask for a return.

The reason why the annotation is written instead of the on-the-spot start-up test is because most refrigerators require that after handling, stand still for a few hours, and wait for all the coolant to flow back to the bottom of the compression line before testing the machine, otherwise the refrigerant left in the upper part of the pipeline will affect the work of the compressor.

Experience area and precision month company.

Leave it for an hour or two and then plug it in, and it should be fine.

Start to see if there is a problem, then call the maintenance department.

With the use of ah, there is a problem with a new one.

Don't say anything if you bought it, let's get a new one. Maybe it's okay, open it and try to see if there is any abnormal noise.

It can be tilted, but it depends on the direction of the compressor installation in the machine, if the refrigerant in the compressor cannot be circulated normally due to too much inclination, it will affect the refrigeration effect, and it is best to place it horizontally! If you can ensure that the compressor in the machine is level to the ground, even if the refrigerator is tilted at 90 degrees!

Absolutely not more than 45 degrees, generally controlled below 30 is more reliable.

The reason lies in the structure of the compressor, in which the shock absorption structure is to hang the pump body on the hook on the four walls with a spring hook. If the angle is too large, the spring can easily disengage. And because the compressor is sealed, once the hook is disengaged, the repair cost is very high.

I probably want to buy 2 or 3 more compressors (including the cost of fluorine replacement), and the quality is difficult to guarantee after maintenance.

The early refrigerator, that is, the compressor is not a rotary compressor, and the tilt angle is best not to exceed 30 degrees, and the refrigerator generally uses a rotary compressor, and the tilt angle is no problem if the tilt angle exceeds 180 degrees.

Yes, just don't be too oblique.

In order to reduce the vibration of the compressor when working, the reciprocating compressor is hung with four springs, and the inclination is too large when handling, which will make the spring fall off, so it is emphasized that the inclination of the refrigerator can not be greater than 45 degrees. However, rotary compressors do not have this defect, and the angle is not limited when handling.

The normal ones won't tilt, and you may not put them well. The refrigerator should first be placed on the ground when it arrives at home, and the refrigerator should never be placed in the packaging base, so that the unstable placement of the refrigerator will cause abnormal noise of the refrigerator.

There are two adjustment feet in the front of the refrigerator, which are properly adjusted so that the refrigerator can be placed firmly on the ground. There are built-in condensers on both sides of the Yuanzheng refrigerator, which is the part of the refrigerator for heat dissipation, and the space of more than 10cm must be reserved on both sides to ensure the normal heat dissipation of the refrigerator.

Reasons why the refrigerator cannot be tilted excessively when handling:

1. During the handling of the refrigerator, the tilt of the body should not exceed 45 degrees, and the vertical skin of the box should be kept as straight as possible, especially the refrigerator should not be turned upside down and placed horizontally.

2. When the inclination angle of the refrigerator is too large, it will cause the internal compressor to fall off from the spring and tilt in the shell, and when the power is on, the compressor vibration will directly collide with the shell, resulting in a serious mechanical impact sound, and the resulting failure can only cut the compressor, re-weld after maintenance, evacuate, and charge the refrigerant. Therefore, the refrigerator must not be carried horizontally during handling.