How to use Haier washing machine XQG50, Q1008

Hello, thank you for asking the company.

Get the instruction manual you need. Please note for the first time of use:

1. Check first when you open the package. After opening the outer packaging of the washing machine, you need to check whether the washing machine has been damaged during transportation, and check whether all the accessories are complete.

2. Remove the transport bolts. Before using the washing machine, be sure to remove the transport bolts on the back, otherwise the washing machine will not only be very noisy but also the body will shake very badly.

3. Choose a flat place for installation. Before installing the washing machine, the characteristics of the installation site must be hard, dry, and flat, and it should be protected from direct sunlight and away from heat sources such as gas. Never place the washing machine on a carpeted base.

4. If it is not stable, adjust the foot. After the washing machine is placed, check whether the washing machine shakes smoothly, if there is shaking, you can adjust the 4 feet until it is stable.

5. Use a special faucet for washing machines. There are special faucets for washing machines on the market**, you can first screw out the 4 screws on the joint, and then loosen the round plastic and circular metal ring on the joint, and then put the joint on the faucet and tighten the 4 screws, and finally tighten the round plastic and circular metal ring on the joint.

6. Keep the drainage pipe at a suitable height. In order to prevent the occurrence of siphoning, the installation height of the drain pipe should be between meters, and the end of the cut drain pipe should not be immersed in water.

7. The power connection should be safe and reliable. The safety and reliability of the power supply is the guarantee for the operation of the washing machine, to ensure that the voltage is consistent with the parameters and specifications on the washing machine, use more than 10A AC alone, and reasonably choose the fuse or fuse.

8. Clean the new washing machine before use. Since washing machines are inspected before leaving the factory, and then sealed and packaged to sell to consumers. Since there will be some residual moisture inside, which will cause some odors for a long time, it is best to clean up the new machine for the first time, such as running a program such as "barrel cleaning".

You are welcome to ask the company questions again.

We wish you a happy work life

What is the use of the economical wash button.

Detailed explanation of how to use the washing machine.

1. Turn on the power supply and water inlet pipe, and turn on the faucet.

2. Put the clothes in the washing machine and put the laundry detergent.

Or pour the laundry detergent into the laundry detergent card slot. The amount of laundry detergent should be decided according to the amount and cleanliness of the clothes.

3. Select the washing mode according to the different clothing materials, and adjust the knob or button of the control panel. The location of the indicator light is the current laundry mode.

4. After selecting the washing mode through the button or knob, the water temperature, spinning speed, rinsing, pre-washing, etc. can be adjusted separately through the button, and a parameter will be changed every time the button is pressed.

5. Select the number of washes, the number of dehydration, the washing time, etc., press the start button after all are selected, and the washing machine will start working.

6. After the laundry is completed, the washing machine will send out a "Didi" prompt sound to indicate that the work is completed.

1. Choose the right triangle plug, plug in the power supply, and make sure you are dry.

2. Unscrew the faucet and put the drain pipe into the floor drain.

aside, it is convenient for drainage.

3. After the compass is connected to the power, you can start the washing machine and press the power button.

4. According to the washed clothes, select the appropriate washing mode, and click to switch to a mode.

5. Choose different cleaning steps according to the cleanliness of the clothes, and also press to change the mode.

6. Press the start button to start washing the clothes, just wait for the cleaning to dry after the cleaning is completed.

Summary. So how do you open the washing box in this washing machine?

Hello dear, turn on the water and electricity before washing, and put the drain pipe down. Step 1: Open the lid, put in the garment, and close the lid.

Step 2: Put the detergent: Pull the detergent box out, put in the detergent, and push the detergent cartridge in and close.

Step 3: Select the laundry program: After the power is turned on, select the laundry program according to the different laundry needs of the user.

Step 4: After selecting the laundry program, press the "Start Pause" button to start the washing machine, and the washing machine will automatically execute the washing program. When the washing machine is finished, turn off the water and electricity and take out the laundry.

How to use Haier washing machine XQG100-B016G.

Haier washing machine XQG100-B016G how to use Hello dear, wash the limbs and front clothes hungry first machine is powered on; Add detergent; Put the laundry to be washed and dehydrated in the washing machine bucket; Set high, medium and low water level switches; Start the washing machine, and the water inlet solenoid valve is turned at this time; When the water level reaches the preset point, the computer controller issues a Zen command, and the solenoid inlet valve closes. Hope it helps.

Does this washing machine have a swasher box.

So how do you open the washing box in this washing machine?

So how to open the washing strip box in this washing machine, hello dear, turn on the water and electricity before washing, and put the drain pipe down. Step 1: Open the lid, put in the garment, and close the lid.

Step 2: Put the detergent: Pull out the detergent box, put in the acacia detergent, and push the detergent box in and close.

Step 3: Select the laundry program: After powering on, select the laundry program according to the user's different Hashiga laundry needs.

Step 4: After selecting the laundry program, press the "Start Pause" button to start the washing machine, and the washing machine will automatically execute the washing program. After the washing machine is running, turn off the water and electricity, and take out the clothes I hope it can help you.

Summary. Hello dear, Haier washing machine XQG50-8866 The steps to use are: 1. First connect the power supply and press the start button, that is, the keyboard on the washing machine has the word switch written on it.

Hello dear, Haier washing machine XQG50-8866 The steps to use are: 1. First connect the power supply and press the start button, that is, the keyboard on the washing machine has the word switch written on it.

Hello kiss, 2. Press the function key, that is, the washing and rinsing selection function below or on the side of the switch key.

Hello dear, 3. After the selection is completed, press the appointment button to start washing clothes.

Hello dear, 3. Turn off the power when the time is up, and then turn on the washing machine and take out the clothes to dry.

5. If you need to pause halfway, select the pause button, and if you want to start again, press this button again to start working.

Hello dear, the above is the use of Haier washing machine XQG50-8866. At the same time, remind you to wash the inside of the tube after washing your clothes daily, wipe it with a rag at the same time, and then put it in a dry place without sun, while avoiding water splashing inside the washing machine, disconnect the power supply after each use, and wipe your hands dry when pressing the button to avoid unnecessary injury. Finally, I wish you a happy life and smooth work.

Hello, how to use the detergent box of the xqg100 Haier drum washing machine: The detergent box of the drum washing machine generally has 2 to 3 small compartments, which are used to place detergents, softeners and disinfectants respectively. The label "1" or " in the small box indicates that laundry detergent has been added to this grid.

The small grid is marked with " " to indicate that the softener is added to this grid. The other compartments are used to add disinfectants, and you can distinguish detergents. When the laundry program starts with the water intake, the liquids in the different compartments will enter the drum with the water to better clean the laundry.

Be careful not to misplace laundry detergent and fabric softener, if you put laundry detergent in the fabric softener compartment, it will cause a large amount of laundry detergent to be left in the laundry. In addition, the softener should not be added too much, and there will be a maximum amount in this grid, which cannot exceed the "max" marking line.

Summary. Hello dear hello I am glad to answer for you, dear hello Haier washing machine XQG50 - 8866 washing machine is generally divided into four steps: first, press the power to start.

Second, choose a washing program, according to the material of the clothing, generally choose cotton and linen. Third, choose the temperature, about 40 degrees. Fourth, press the "Start Pause" button to start working.

I hope mine can help you. Have a great day

Hello dear hello I am glad to answer for you, dear hello Haier washing machine XQG50 - 8866 washing machine is generally divided into four steps: first, press the power to start. Second, choose the washing program, according to the material of the hand-poor clothes, generally choose cotton and linen.

Third, choose the temperature, about 40 degrees. Fourth, press the "Start Pause" button to start the bridge work. I hope mine can help you.

I wish you a happy life

If my answer is helpful to you, please also give a thumbs up (comment in the lower left corner), look forward to your like, your efforts are very important to me, and your support is also the motivation for me to enter the town. If you feel that my answer is still satisfactory, you can click on my avatar for one-on-one consultation. Finally, I wish you good health and a happy mood!

Fresh lead flowers] <>

Hello dear hello I am glad to answer for you, dear hello due to the fact that the ** is too large to send the answerer to answer for you in a text method, there are three reasons why the Haier washing machine XQG50-8866 washing machine does not enter the water: 1. The filter screen of the inlet valve is blocked; 2. The water inlet solenoid valve is faulty or the plug-in line is not in good contact; 3. The water inlet relay on the control board is faulty. Workaround:

1.If the filter is clogged, then it only needs to be cleaned up, and the problem of no water entering the automatic washing machine can be solved. In this case, the filter screen can be cleaned frequently through the bridge tunnel to effectively prevent it.

2.If it is not the cause of the clogged inlet valve, then we can check its failure problem by the following methods. First, turn on the power and close your ears to the water inlet valve to hear if there is a "buzzing" sound; If the water inlet valve hand is not "buzzing", it means that the water inlet valve is not working, it may be that the wire end of the water inlet valve is loose or the water inlet valve is broken, if you understand electricity, you can turn on the washing machine to see if there is a water inlet motor, try to find the two wires with a multimeter to measure whether there is a voltage when entering the water, there is no voltage in the sensitive potato wither, then the problem may be on the computer board, at this time you should try to replace the computer board; If you can hear the "buzzing" sound, check whether the tap water is cut off, turn off the faucet, unscrew out the inlet pipe joint to check whether the filter screen of the inlet valve is blocked by foreign objects, if there is a pull out of the filter screen for cleaning, if the problem has not been solved, the inlet valve should be replaced, the inlet valve core may be stuck and cannot be opened.

I hope mine can help you. Have a great day

How to use Haier XQG70-1011 automatic washing machine.

How to use Haier XQG70-1011 automatic drum washing machine: Place the washing machine on a solid and flat ground, adjust and install it, connect the water inlet hose with the faucet and the water filling port of the washing machine, and put the drain pipe well. Plug in the power plug, press the power button, and turn on the power of the washing machine.

Put the laundry that needs to be washed and dehydrated into the washing machine drum, close the washing machine door, determine the washing choice, and set the washing program. Depending on the amount of dehydrated laundry to be washed, select the high, medium, and low water levels set the water level switch. Then start the washing machine, turn on the water inlet solenoid valve, and start to feed water.

When the water level reaches a predetermined position, the water level switch is turned on, the water inlet valve is closed, and the washing machine starts to run automatically (washing --- rinsing --- dehydration is completed). At the end of the whole laundry washing process, the washing machine will automatically shut down after notifying the beep.