How to recover hard drive after formatting Emergency 20

How to recover computer hard drive that is formatted.

It depends on whether you use a quick format or not. The difference between formatting and quick format is that quick format is just clearing the FAT table (file allocation table), so that the system thinks that there are no files on the disk, and does not really format all the hard disks. If you don't choose fast formatting, the normal formatter will scan all the tracks on the hard disk to erase all the contents on the hard disk, which is not recoverable, and the normal format can detect the bad sectors on the hard disk, and the speed will be slower.

Quick format simply deletes the files on your hard drive.

Full formatting is the true re-clustering of hard drives.

Generally speaking, a quick format is better than a full format because it can be formatted at a very fast speed and requires less wear and tear on the hard drive.

To sum up, if you don't choose the quick format, you won't be able to save it.

Go find a data recovery company and see if they can help you out.

Using finaldata is the software that should do the trick! Remember not to write any data!

Find a company to recover a bit and a dime... How do you think it's a good deal.。。

The person asking the question, you're not kidding. Geduge, you still want to regret it. How can you be like this?

How to recover data after the hard drive is formatted? Formatting is a modification operation that we do not often use, because formatting will clear all the data in the disk partition or memory card, so people with one core are more cautious about using formatting. So if the memory card or disk fails and has to be formatted and repaired, or accidentally clicks the format button, how to recover the data lost after formatting?

Here is an introduction to the formatted recovery method.

The specific operation method of how to recover data after the hard drive is formatted is as follows:

Open it first"Lost Data Recovery".Software, select the disk scanning mode formatted by mistake, then select the corresponding type according to your own situation, click scan and it will start scanning, you can choose to double-click the preview after the accidental deletion of data scanning and redrawing, select the data you want to recover, and then select it, click Recover, select the save path, and the data recovery will be completed.

That's all about:How to recover data after the hard drive is formatted? The recovery method is described. In fact, the file formatted by mistake is not completely erased from the data traces, but the file name is deleted from the system to make room for other data. Therefore, if you need to recover useful files, you should pay special attention not to read and write to the disk after formatting, otherwise it is easy to cause the traces of the data you want to recover to be overwritten.

After the hard disk is formatted, the data can be recovered, and the recovery requires the help of the corresponding software, and the recovery method is as follows:

2. After selection, find the partition that was formatted before on the interface, click "Next" after selection, and the software will perform a deep scan of the selected partition, and wait patiently for the scanning to be completed.

3. After the scanning is completed, find the files that were deleted due to formatting in the interface result and check them, and preview them in the specific file information that appears next to them to confirm the files that need to be recovered. After confirmation, click "Next".

4. Next, the user needs to click the "Browse" button to customize the storage path after file recovery. After determining the storage path, click the "Next" button, and the software will start to resume the work of Sozhou Di. (When selecting the file storage path, avoid selecting the partition that was formatted before to avoid data overwriting and affecting the recovery effect).

The specific steps are as follows:

1. Select Type: Select the hard drive.

Figure 1: Select the type.

2. Select the volume label to be scanned: Select the disk from which the data was lost.

3. Select the recovery scenario: Recover formatted **.

4. Check your options:

5. Save the file: Wait for the system to scan, select the file you want to recover in the scan result, and right-click "Save As" to successfully recover the lost file.

When encountering important files that are deleted by mistake, you need to use EasyRecovery to recover them as soon as possible, as long as you haven't done too many writing operations, the time interval is not too long (the original deleted files may be overwritten after too long), I believe you will be able to recover the deleted files! The recovery skills are referenced from the easyrecovery Chinese official website, I hope to help you.

Use after running.

Formatted recovery.

This function comes to what this hard disk is ok.

Loss of the original partition caused by a mistake. If your partition structure is special, simply using partition recovery software, to a large extent, may not be able to find the correct partition data, wrong reconstruction, will destroy the original partition information, causing recovery difficulties. If it's a notebook partition, it's often special.

If you are familiar with data recovery, this situation can be easily recovered, now the computer can start the Internet normally, and the original data can be directly restored from the original disk through remote assistance. With the right operation, the system does not need to be reinstalled. Do not write a large amount of data to your current hard drive.

So as not to corrupt the data that may be recovered.

Be sure not to repartition, format, or anything like that. In that case, the recovered data is incomplete. Maintain the status quo.

To a large extent, the original data can be completely restored with proper analysis and processing. Without the need for data recovery software to scan the recovery. If you simply use data recovery software to scan and recover, it will take time and the effect is difficult to say.

If you want to try the recovery yourself, refer to scanning the recovery with data recovery software, and remember not to write the found files to the hard drive where the problem occurred. Instead, you should restore the found data to a different hard drive first. Make sure that the partition is correct before processing the problematic partition.

Computer formatting is also a time that we often encounter, after formatting, how to retrieve data? In fact, the data can still be retrieved after the computer is formatted, so follow the method to try it.

Can I recover a formatted hard drive?

You can use some data recovery software, such as EasyRecovery, which is good, but there is no guarantee that it will be 100% recovered, no matter what software is the same.

Can't recover!! Because there is no backup!! No matter what software you use, it doesn't work!! Because formatting means that the file has entered a black hole, which cannot be recovered.

You can find a specialized data recovery company to recover, formatting just three operations on the hard drive: 1. DBR reconstruction.

2. The FAT table is cleared.

3. The file directory entries are cleared, in this case, the files directly in the root directory of the partition cannot be recovered, but most of the files in the subdirectory can be recovered!! You can also find some software on the Internet to try to recover, and remember that you can't write to this partition.

Formatting is easy to recover.

Both EasyRecovery and FinalRecovery can be recovered.

In general, it is not possible to recover data after hard drive formatting. Because it's an irreversible process. So please use formatting with caution.

Now there is a technique that can really recover formatted dataBut not all of them, only some of them. And this is a kind of technology used in the first department, such as FBI, and other national large machines.

Large companies can also afford the cost. If you are an individual user, it is recommended that the landlord forget it

EasyRecovery can't recover all of them, it can only restore things that were deleted in the early stage.

Data recovery does not necessarily guarantee full recovery, I don't know if you have operated on the D drive after you found out that it was accidentally formatted. If you do it again. It is likely that the section where you put ** will be erased.

If you change the recovery software and see if it can't be recovered, it is likely to have been touched.

EasyRecovery recovery is not 100%, if you can do 100% with software, then what do other data recovery software companies rely on to eat, right, if you take these data recovery companies, the cost is quite high, yes, I don't think it's worth it.

If you have installed the system on the D drive, you may have installed the system on the D drive, and it is likely that the data that was originally on the D drive will be overwritten, and if the data is important, go to a professional data recovery company for help.

You say "some old ** have recovered, why can't you find the ** from the previous week".

Maybe those new ** were overwritten by the system, and probably couldn't be recovered, and they were overwritten and erased.

Your stuff from a week ago has been completely deleted.

It's troublesome to restore, but it's convenient if you have a backup, and with cmd, it may work.

With data recovery software, most of them can be recovered.

No way!! Otherwise, I'll give you a !!

Try it out with the free DiskGenius Recovery.