Bounty boot blue screen urgent! Urgent! Urgent!

Blue Screen" software causes and solutions: 1. Loading too many programs at startup Don't load too many applications at startup (especially if your memory is less than 64MB), so as not to exhaust system resources. Under normal circumstances, the system resources should not be less than 90% after win9x starts.

It's best to keep it above 90%, if it's below 70% without running any programs after startup, you need to uninstall some of the apps, otherwise there may be a "blue screen". 2. There are bugs in the application Some applications have flaws or errors in their design, and they may conflict with Win9X or compete for resources when running, causing Win9X to be unable to allocate a memory address to it or encounter its protective errors. This kind of bug can be unpredictable, with free software being the most common.

In addition, because some users are still using pirated software (including pirated Win9X), these pirated software will destroy and lose part of the source** during the decryption process, making the software very unstable and unreliable, and often leading to a "blue screen". 3. Attacked by unknown programs or viruses This phenomenon as long as we usually encounter it when we surf the Internet, when we are surfing, especially when entering some BBS stations, we may expose our IP"Hackers"Attack with some software. In this case, it is best to install some defense software on your computer.

Then there is the security settings to log in to BBS and hide your IP. 4. Version conflict Some applications need to call a specific version of the dynamic link library DLL, if the old version of the DLL overwrites the new version of the DLL when installing the software, or when the application is deleted, the useful DLL file is deleted by mistake, the above call may fail, resulting in a "blue screen". You might as well reinstall it and give it a try.

This article is about the blue screen that can be caused by the use of software, but of course this is only a small part of the causes of the blue screen. 5. There are errors or corruption in the registry Many cases this is the main reason for the "blue screen". The registry holds important data such as Win9X's hardware configuration, application settings, and user profiles, and if the registry is wrong or corrupted, it is likely to have a "blue screen".

If your computer often has a "blue screen", you should first consider that there is a problem with the registry, and you should detect and fix it in time to avoid greater losses. 6. Incompatibility of software and hardware New technologies and new hardware are developing rapidly, and if new hardware is installed, there is often a "blue screen", which is mostly related to the fact that the BIOS or drivers of the motherboard are too old, so that the hardware cannot be well supported. If your motherboard supports BIOS upgrades, you should upgrade to the latest version or install the latest device drivers as soon as possible.

What is the reason for the blue screen when the computer is turned on**, and how to solve the blue screen when the computer is turned on?

If there is an error in the system, it should have nothing to do with the hardware, try to use the original CD, start the fault repair station, and see if you can fix the error, if not, you should consider installing the system, and installing the system should be able to solve it.

There may be a hardware issue, take a look at the change memory.

If the hard drive is broken, go to a professional repair for consultation.

Reboot the system, and keep pressing the F8 key when the boot menu appears, and the advanced boot options menu will appear, then select"The last time it was configured correctly".

Hello. 0x000000ed: unmountable_boot_volume

Error analysis: It is generally caused by an error in the disk, sometimes it is also recommended to check whether the hard disk cable is not in good contact, or does not use a cable that meets the transmission specifications of the hard disk, for example, the ATA-100 still uses the ATA-33 cable, it does not matter if the low-speed hard disk is low-speed, but the requirements of the high-speed hard disk (supporting ATA-66 or above) are stricter, and the connection with the wrong specifications will sometimes cause this kind of failure that cannot be turned on. If this error still occurs frequently after repair, it is likely to be a precursor to hard drive corruption.

Solution: In general, a reboot will resolve the issue, and it is recommended to do so anyway"chkdsk /r"command to check the repaired hard drive. Or use DiskGenius > to detect and repair bad sectors on your hard drive.

I wish you all the best, and if it helps, I hope to adopt it in time.

Then you try to reinstall the system first, if the same situation still occurs, it is best to repair it for you to see, generally the blue screen is a hardware problem.

Oh, and the system can only be reinstalled. If you remember that there is something in the C drive, remember to tell the person who installed the system that it can be copied for you.

Crack the patch and unzip the password.

The background of the boot display turns blue,It's likely that there is a problem with your monitor,The computer without an optical drive can also install the system,Use the U disk to boot into PE,Restore the image file of the GHO to install the system automatically。

xddoitwell's method.

If it still doesn't work, try the next Super Bunny.

The first two problems have been encountered before, but they can't be solved well, so let's reinstall them.

You place a "Deep" or "Rainforest Woodwind" xp ghost file online and then use "One Click Restore" and you're OK in a few minutes, haha.

Of course, you can also make a USB flash drive WinMe yourself, and use Ghost to restore the system after the USB flash drive is started.

Reinstall the system.,The Internet café machine is installed with something like a restoration elf.,Every time you turn on the machine, it's sure to be restored.。

If it's not the king eight host, you can use D2D to copy, of course, if the hardware is different, it may cause instability or even not work at all.

Or if you have a ghost backup in advance, just transfer it back.

This is the system checking the disk error, if it takes a long time, you can consider using PE to boot into the system, scan the health of the hard disk to see if there is a problem, if there are many bad sectors, change the hard disk, if there are no bad sectors, reinstall the system.

If there is a problem with the disk, use a professional disk checking tool to check it.

This is a boot self-test, not a blue screen, just wait a few minutes for the self-test to finish.

This is a file system self-test, self-healing.

First, when you are in safe mode (restart, press the F8 key at startup, and select "Safe Mode") to see if the blue screen appears. If the blue screen does not appear, it can be inferred that the cause of the incident is that the driver software is expired and the third-party program is interfering.

If the problem is not resolved, there is a possibility that a software conflict is causing the blue screen. You can use a 'clean boot' to troubleshoot, identify the problematic software, and then consider a solution.

2.If the blue screen is still in safe mode, the problem may be due to unstable hardware. Here are some general steps you can try to troubleshoot hardware blue screens:

1.If you have recently replaced the hardware, please replace the new hardware back to the previous hardware or other new hardware.

2.If you have more than one memory module, please keep only one and remove the rest.

3.Confirm whether the wiring is loose and whether there is too much dust burning in the chassis, and fix and clean it.

4.Replace it with a different power supply.

Wouldn't it work with a reboot? Is this an all-in-one or a desktop?

It's been a long time playing the game.