The update of the Apple 4S mobile phone is interrupted, and what should I do if I can t turn off the

I enter the mode and can recover.

Press and hold the power button and the home button at the same time.

More than ten seconds. Wait until you see the Apple logo before letting go.

Force a reboot.

If it doesn't work, connect the computer to iTunes to restore the system.

The Apple 4S mobile phone is dead, and it can't be turned off, at this time, you can go to the after-sales factory reset, and then it's OK.

You can press and hold the power button for more than 10 seconds to force power off, or press and hold the home and power buttons at the same time to force restart the phone.

What should I do if my Apple 4S phone crashes and can't be turned off? The Apple 4s phone has crashed and can't be turned off, so you just wait, wait for when it will be restored, and when it will be turned off and restarted.

1. This is a stuck screen phenomenon. If the screen is stuck, it is most likely because the phone cache is too much and it is dead, press and hold the home button and power button of the phone until the Apple logo appears, let go, and force restart the phone.

2. In daily use, don't open too many background programs, double-click the home button of the phone, swipe up to close the programs running in the background of the phone, turn on and off regularly, and clean up the cache of the phone.

3. Sometimes the stuck screen is also related to the iOS system, please upgrade the iOS system to the latest version. After upgrading to the latest version of iOS, the touch screen function will be restored.

4. If none of the above methods can be solved and the mobile phone has a hardware failure, it is recommended to go to the mobile phone after-sales point for testing and repair.

Press and hold the top lock screen and then press and hold the circle below the phone, and you will know after a few seconds of pressing both at the same time.

Apple 4s can't turn off the phone can be forced to shut down:

At the same time, press and hold the power (power button, power on and off button) + home button.

When the screen goes black, release the home button.

The white apple logo will appear within a few seconds of releasing the home button. At this time, do not release the power button, and wait until the white apple logo disappears and the screen is turned off to complete the shutdown.

Press and hold the power on button and the home button at the same time.

Probably, the interface of the phone's battery is rusty.

The shutdown button is pressed and held together with Hone Ken 2 and then you can do it.

Charge it first to see if there is still power. If you can't start it when there is power, you can try to force start, please press and hold the power button and the home button at the same time until the screen lights up. If it still doesn't work, please take it for repair.

Press and hold the round button and then press and hold the power button for more than 10 seconds to try, or just plug in the charger and wait.

It can't be that there is a problem with the power button, right?

1 Connect the computer with a data cable to see if it can be turned on.

2 Or try pressing the Home button and holding it for 6-8 seconds to quit any program that can get stuck on your iPhone.

3 Or try the reboot function in a tool such as connecting to a PC.

Press the power button and the function key in the middle of the mobile phone at the same time, it can generally be started after a few seconds, this is a forced start, and it will be sent for maintenance if it can't be started.

1.Turn off your iPhone.

2.Press and hold the power on button and the home button at the same time.

3.When you see the white Apple logo, release the power on and off button and keep holding the home button.

4.After opening iTunes and waiting for it to prompt you for recovery mode, you can press and hold the shift key on your keyboard, click "Restore", and select the corresponding firmware to recover.

The phone is completely turned off, and it can't be turned on, press the volume button and the home button tightly.

Don't let go of the power button Press and hold the home button until the screen goes black, wait for a few seconds, at which point the computer should have a prompt sound that the device is disconnected.

Reasons why the Apple phone can't turn on:

1. There is no electricity. If you use up all the battery power, the charge needs to be charged to 5% before it can be turned on normally. So in this case, please let the phone charge for a while before trying to turn it on.

2. Software malfunction. If you are sure that the current battery of your phone is sufficient, but it cannot be turned on normally, there may be a problem with the software system of your phone. At this time, we can try to press the home button + power button on the home screen of the mobile phone at the same time until the screen is lit up and there is a display.

3. System crash. If none of the above solutions work, and you see an iTunes connection screen on your iPhone's screen, it means that your phone has entered recovery mode at this time. When this happens, the only way to do this is to restore the system for your phone.

Connect your phone with the computer with a data cable, press and hold the home button and the power button at the same time for 10 seconds, then release the power button and continue to press and hold the home button for 5 seconds, if you see the connection to iTunes, it is a failure, and you have to start again. If the screen doesn't light up after these 2 steps, you will enter DFU recovery mode, and then you can use iTunes to restore your iPhone, or use a third-party flashing software to reflash your iPhone.

Re-flash the computer with iTunes recovery mode, and the original data will be gone.

How to deal with the iPhone not booting normally:

1. Check whether the iPhone has physical damage, such as: bending deformation or water ingress and other accidents;

2. Use the original data cable and charger to charge the iPhone, check whether the iPhone is responsive, and the battery may not turn on if the battery is insufficient;

3. Force restart your iPhone;

4. If there is still no response or cannot be turned on normally after the above operations, it is recommended to go to the local Apple official or authorized after-sales service.

1. First of all, see if it is the reason why the battery is used up, if this is the case, connect the mobile phone to the power supply for charging, it should be noted that even after connecting to the power supply to charge, it will take a few minutes to turn on, and it will be charged to 5% to turn on normally.

2. Press the Home button and hold it for 6-8 seconds to exit any program that can get stuck on your iPhone.

3. Try to press and hold the power on and off button, if it can be restarted, this is the best.

4. If the above methods are useless, try to press the home and hibernation wake-up buttons at the same time, and hold them for about 10 seconds, and then you can force the shutdown.

First of all, it is necessary to detect the battery problem of the mobile phone, such as plugging in the charger to charge, if there is no jailbreak, it will be restored directly, and if it has been jailbroken, it can be plugged into the computer to see if there is a reflection. If the above is not successful, you can choose to flash the machine, if the flashing machine can not be solved, you can send it to the after-sales service.

Connect the computer with a data cable, open the iTunes software, and then turn it on again to see if there is any response.

Or press and hold the home and power off buttons at the same time for a few seconds and try hard starting.

1. If you can't turn it off, then press and hold the home button and power button of the phone at the same time to restart the phone, and you can resume the operation. Old Cong Annihilation.

2. It will be restored after upgrading to the latest version of iOS. Or the cache memory of the mobile phone is too full, and the phone is turned on and off at regular intervals or the software that is not commonly used on the mobile phone is deleted.

3. If Zheng Min's method cannot be solved, it is recommended to go to the mobile phone after-sales point for inspection and maintenance. Squire.

1. After the Apple 4S mobile phone is turned off, it will automatically turn on when charging, which is the built-in function of the mobile phone.

2. Apple's mobile phone, when it automatically shuts down after each time it runs out of power, it will be automatically shut down when the mobile phone power reaches 4%. Eggplant Bump.

3. If you don't want to turn off the phone while charging, you can turn on the airplane mode of the phone or turn it off again before charging.