Beginner s textbook on engineering cost, as well as learning methods 20

11g101-1 2 3, Flat Law Basic Tutorial, Flat Law Q&A, Flat Calculation, Bill of Quantities Valuation, Software Can Use Glodon, Luban, Magic Machine, etc., What do you need hi me, free.

Go to the last training class is the fastest, everyone's learning methods are different, and the engineering cost learning materials are a little different in each place, the information provided by others or the books to read may not be your place, learn from it, but to learn specifically, or to see what training courses there are in the local area or go to an online school, at least there is a bottom and then look at the information to get started much faster, and no matter which major related to engineering, the first thing to learn must be to read the map, you can't do anything if you don't understand the map.

Book, you go to the Internet to check some university textbooks, follow the textbooks, first look at the map, the project cost can understand the map on the line, the drawing requirements are not big, understand to buy the regional quota and list specifications, with the quota and the list of specifications to calculate the amount of work, and then in accordance with the provisions of the pricing model, calculate the project cost, in the middle of the problem, there is a teacher to take it, their own groping is still a little annoyed.

If you want to learn from scratch, you can buy the book "Project Budget and Quota", I suggest you are paired with a copy of "Architectural Drawing and Drawing", after all, if you want to learn cost, you must be able to read architectural drawing.

I suggest that you go to participate in the training cost, at least I feel a little bottom, and you can read books, but it depends on whether the company collects it.

First, the cost engineer examination textbook learning method.

1.Start with the syllabus and clarify the scope of the exam. The cost engineer exam syllabus is the basis for the exam and the focus of the candidate's preparation. Therefore, before you start preparing for the exam, be sure to read the syllabus carefully to understand the basics of the exam and clarify your preparation goals.

2.Decide where to prepare for the exam. According to your actual situation and ability level, choose a suitable preparation direction for you.

If you are a real estate appraiser or real estate agent, you can choose "Real Estate Valuation" or "Real Estate Agency" as the exam preparation track. If you are a construction engineer, you can choose "Construction Project Management" as the preparation track. The purpose of this is to allow you to concentrate on preparing for the exam and avoid distractions that could lead to poor learning results.

3.Choose the learning style that's right for you. There are many ways to learn, including self-study, classes, training, internships, reading professional books and periodicals, participating in professional conferences, participating in professional training, participating in professional competitions, participating in domestic and foreign travel and study, participating in domestic and foreign academic exchange conferences, participating in domestic and foreign academic conferences, participating in domestic and foreign academic conferences, participating in domestic and foreign academic conferences, participating in domestic and foreign academic conferences.

According to your actual situation and ability level, choose a learning style that suits you to prepare for the exam.

4.Create a study plan that works for you. Creating a study plan that works for you is key to ensuring that you prepare for the exam.

According to the requirements of the syllabus, develop a study plan that suits your level and schedule. When making a study plan, it is necessary to pay attention to avoid anxiety caused by excessive concentration in hail, and should adopt a phased and batched approach to make a study plan.

5.Strive to improve comprehension skills. Comprehension is one of the key skills to deal with logical problems.

A lot of logical questions are made up of seemingly unrelated pieces of information, and if you can quickly and accurately understand this information and connect it together, you will arrive at the right answer. Therefore, in order to do well in logical problems, it is necessary to have excellent comprehension skills. In order to improve comprehension skills, you must first develop good reading habits, and secondly, do more logical problems.

6.Strive to improve problem-solving skills. Problem solving is the focus of the cost engineer exam, and it is also one of the abilities that candidates should strive to improve.

To do well in problem solving, one must have excellent analytical and problem-solving skills. In order to improve these capabilities, it is necessary to do more logical and practical problems.

7.Strive to improve resilience. Adaptability is an important direction in the cost engineer examination, and it is also one of the abilities that candidates should strive to improve.

To do well in adaptability, you must have excellent analytical and problem-solving skills. In order to improve these capabilities, it is necessary to do more logical and practical problems.

If you have any questions about the self-test test, do not know the content of the self-test test center, and do not know the local self-test test policy, click on the bottom to consult the official website teacher and receive free review materials:

How to get started with cost.

With the rapid development of the construction project market and the continuous expansion of the project cost consulting, project management and other related markets, the core of the project cost is the project budget, so the preparation of the budget estimate is the only document to test the technical level of the cost personnel. The quality of the budget estimate directly affects the quality of the construction drawing settlement, so how to get started for a novice in cost, how to do a good job in the project budget?

Learn to read maps - a prerequisite for budgeting.

Construction drawings are the "language" of construction engineering, before calculating, it is necessary to carefully familiarize yourself with the drawings, carefully read the design instructions, and understand the designer's intentions. Generally, first look at it and then read it carefully, so that the project forms a three-dimensional figure in the mind, and knows its structural form, the requirements of internal and external decoration, and what new building materials are used. The order of reading the drawings generally starts with the structural drawings, and finally looks at the construction drawings, focusing on checking whether the elevation and size of the structural drawings and the construction drawings are consistent, and the contradictory places or unclear places should be recorded at any time, and put forward during the review of the drawings, and the design unit will answer clearly.

Familiarize yourself with quotas and calculation rules - the yardstick for budgeting.

Familiarity with the content and calculation rules of the quota is the basic clue of how to calculate the quantity of work and obtain the quota. There must be a unified scale for the calculation of engineering quantities, which is the calculation rule stipulated by the quota. Therefore, being familiar with and mastering the content of the quota and the calculation rules is the premise of fast and accurate calculation of engineering quantity.

If you are not familiar with some quantity calculation rules during the calculation, you keep looking at the quota or have a deviation in the understanding of the calculation rules during the calculation process, not only can you not calculate accurately, but also delay the time, and it is easy to fall into the details of the engineering quantity.

Understand the construction process and process - a shortcut to budgeting.

Everyone, even those who are proficient in engineering, have gained valuable experience through continuous practice. For us to calculate the engineering quantity and conduct on-site inspection on the construction site, we can clearly tell us what the reinforced concrete in the drawings looks like in reality, which is intuitive and clear, and easy to understand. In that way, the drawings can be digested and absorbed by themselves, reducing the time spent on reading drawings by half.

There are several issues that should be paid attention to in map recognition.

The construction drawings are drawn according to the principle of orthographic projection, so if you want to understand the drawing, you must master the principle of projection and the drawing principle of the drawing.

When looking at the picture, it must be from large to small, from thick to fine.

Keep in mind commonly used symbols and legends.

Pay attention to the unit of size.

First of all, you must have a certain foundation, and it is best to have contact with architectural drawing, simply put, you must understand drawings. I can't remember too many reference books in the atlas, so it is recommended that you set the drawings and calculation rules of the book, calculate it yourself, and calculate it according to the order of the calculation rules, and the area or volume calculation rules are very clear. The calculation rules for cities are different, but more or less the same.

There are also calculation rules online. If you can't, just ask, take notes. You'll have to cut back on it at first, take your time.

There is no prescribed process for architecture, and even if there is a design.

Learn the basics and then work.

In addition to learning to read the information on the drawing, you must also be able to read the atlas and specifications. Because a lot of information is marked on the atlas. If you study civil engineering, the 16G101 series atlas is a difficult point, and if you can't understand the flat atlas, you can't calculate the engineering quantity of steel bars.

If you want to study on your own, go to some ** and find some free classes to watch.

Learning the quantity calculation, being able to accurately calculate the quantity of engineering is the primary condition to ensure the accuracy of the cost, and the calculation of the quantity is to combine the list and the quota calculation rules to calculate the quantity of the project project, and to understand the deduction relationship between the components. The calculation rules vary from region to region. For example, stairs, some areas are calculated according to volume, and some areas are calculated according to the projection area, which requires familiarity with the calculation rules to be able to calculate accurately.

Learn pricing, pricing is to put it bluntly, it is a set of quotas, and the set of quotas should be based on the characteristics of the project to choose an accurate quota. It's very simple, but when you really operate it, you will find that why some quotas look so similar to the quotas before, and which one should I choose? Why can't I find a quota for some content?

This is probably the most common problem we encounter. Generally, when encountering multiple quotas that look similar, you need to judge the work content of the quota, and choose the appropriate quota according to the work content and use conditions. If you can't find a quota, you need to find a similar quota to change the main material, or supplement the quota.

1. Lay a good foundation, such as building materials, engineering drawings, baiauto CAD, construction technology, etc., these things must be clear in order to get started.

zhi2, learn 08 standard dao, correctly understand the engineering quantity calculation rules, in order to accurately calculate the engineering quantity.

3. Understand the local quota, which is different in each province.

4. Master the two valuation methods of bill of quantities valuation and fixed amount valuation. Including how to determine the unit price of labor, materials, machinery, etc.

5. Learn the knowledge of bidding, bidding and bid evaluation.

6. Find an opportunity to learn more about the construction site and be familiar with the construction process.

7. Learn at least two professional software, one for calculation and one for valuation. Nowadays, there is basically no hand calculation, and many companies will put forward requirements on professional software in recruitment.

8. If you don't understand something, you must ask more. Nowadays, many old engineers who have been on site for a long time are very familiar with the construction process, but they don't know anything about the software. Try to ask this kind of people, don't ask people when you see them, because many people nowadays will not tell you if they are not good, and even tell you the wrong things to mislead you.

In short, learning engineering cost knowledge is to be applied to practical work, it is recommended that you usually pay more attention to the relevant requirements in the recruitment information of such enterprises, and focus on learning according to these requirements.

It's useless to say too much, so I'll copy it back later.

First of all, learn to read the drawings, buy the "Construction Engineering Drawing", "Installation Engineering Drawing" book to read some books related to the engineering cost profession, housing architecture, engineering contract management, building materials, construction economy, you can also look at building mechanics, building structure.

Finally, study professional books, buy a copy of "Construction Engineering Bill of Quantities Valuation Specification (GB50500-2008)" and "Sichuan Province Construction Engineering Bill of Quantities Valuation Quota (2009)", if you are Sichuan Province, other provinces buy their own provincial quota books.

It's okay to buy some books for the cost exam.

To understand the drawings first, and then look at the calculation rules, proficient in the process, after a long time, experience, it is almost the same. However, I think accounting is also very good, so why change careers?

The most important thing is to start from the basics, learn to read the drawings first, and when considering the cost, it is best to go to the construction site for 1 year, so that the budget can be considered a real budget. Otherwise it's going to be a lot of pressure for you, listen to me absolutely!

Fellow travelers, I also want to turn to the project cost, but I studied computer science in college, let's work together!

Why change careers, are you a boy or a girl, if you are a girl, it is strongly not recommended that you change careers.

Let's start from the basics, first of all, to understand the engineering procedures, unit engineering, sub-engineering, sub-engineering, to understand the drawings, to calculate the engineering quantity, as long as there is a good master, you should be able to get started quickly with your specialty.

I've heard others say that unless it's linked to engineering, other majors don't seem to be able to take the cost engineer certificate? Isn't that the case.

Start learning by looking at the drawings, and then learn the calculation and then assemble the price after understanding the drawings. It shouldn't be difficult to find a master to learn more and calculate more!

I'll tell you:

The process of budgeting is the process of pricing a project. The knowledge involved in budgeting includes architectural engineering drawing and mapping, building structure and components, foundation and foundation, building materials, project cost, infrastructure procedures and project management, etc.

If you want to intervene in the state as soon as possible, then I suggest to find some budget and final accounts that have been completed (the project is not large, simpler), and then compare the drawings, the construction site, and especially the budget quota (quota items, measurement rules and related instructions) for research, do not understand the old comrades with experience, and then try to do this budget again, and the level of budget preparation will be greatly improved in a few times. Of course, don't forget to read some related books at the same time, such as: cost engineer training materials, budget officer manuals, building construction manuals, etc.

I'm talking about a way to move from practice to theory, and it's a quick way to learn how to budget. Of course, there are many, many more things that need to be enriched and improved, and it depends on your own efforts. It's okay if you go to a cost engineer training course, but after you finish it, I still have to do what I said.