Why can t ASUS A456U use Win7?

ASUS laptop modified win7 system can be installed directly with the made U disk boot disk, the specific installation steps are as follows:

Preparation: A USB flash drive that can be used normally (the capacity is recommended to be more than 4G).

Learn about the shortcut keys for computer USB flash drive startup.

Steps to install the system to the local computer:

1. Store the prepared win7 system image package to the root directory of the boot disk of the U depth U disk that has been prepared

Step 2: Install win7 system into your computer.

1. Connect the U Depth U disk startup disk to the computer, restart the computer and wait for the boot screen to appear, press the startup shortcut key, use the U disk startup disk to enter the U Depth main menu, select U Depth Win8PE Standard Edition (new machine), press the Enter key to enter, as shown in the figure:

2. After entering PE, it will automatically start the U depth PE installation tool, click first"Browse"Add the system image saved in the U disk, then select the C disk as the system disk storage image, and click "OK", as shown in the figure

5. At this time, you can unplug the U disk, restart the system to start the installation, no need to operate, wait for the installation to be completed, and finally restart it once before entering the system desktop, as shown in the following figure:

Take ASUS laptop A456UR as an example, ASUS laptop with pre-installed win10 system, it is not recommended to replace win7 system, after replacing the system before, the most common situation is that the trackpad cannot be used because of the lack of driver, or the driver is abnormal. According to the hardware configuration of the model, it is recommended to use the native pre-installed win10 system.

If your current system is lower than win7,You can do the upgrade,If you are higher than win7,It's win10,You need to find a professional win7 system to do,This is genuine,There is no damage to the computer,But now the win7 system is about to be passed,So as soon as possible,I personally think win10 is not very easy to use。

The network is to look at the parameters of the A456U series, all of which meet the installation requirements and can be installed.

Brand machine reinstallation system, preferably hard disk full format repartitioning system.

Some brand machines can't be installed with a direct format C disk reinstallation system, because the program is installed at the bottom of the hard disk, so it needs to be formatted and reinstalled in the whole disk.

Yes, but it is recommended to find a professional to operate, and do not fool around.

You can casually go to Master Lu, drive elves, and so on... All are driven.

Then run the 'gho image installer.' exe", press enter directly to confirm the restore operation

The official website of ASUS does not provide the corresponding win7 system driver, and the compatibility cannot be guaranteed by using a third-party driver, which may lead to some abnormal functions, so it is recommended to use the win10 system.

Win10 Win7 needs to convert the partition format to MBR, you need to format the whole disk and repartition it, and then you can install Win7

If you have installed hardware and connected to other devices, remove it, press F2 when you boot it, if you still can't enter the BIOS, it is recommended to go to the service center for testing.

First of all, ask ASUS customer service,Can this computer support the installation of win10,If not,It's not good,Because there is no driver or anything to support,You can't install win7,If the customer service says it can be installed,Then it is estimated that you have to change the settings in the BIOS,You can also try,Change the hard disk mode ahci and then there is a boot mode to change to normal mode。 Try it again.

If there is a hidden partition in an ASUS notebook, the installation of win7 system will often fail. To delete a hidden partition. This hidden partition is used to restore the system in the event of a system crash with one click. Delete with caution.

This notebook does not have the original driver under the win7 system, and there will be driver failures when installing win7.

There are several possibilities, which can be checked in turn:

1. System problems cause the card logo, the operating system can not boot normally, generally need to back up the data in the hard disk and then the system repair or reinstallation.

2. The possibility of hard disk failure is relatively large, you can back up the data first and then repartition it to try, or it is recommended to replace the hard disk for testing or go to the manufacturer's official after-sales service for specific testing.

3. Stuck at the logo may also be other hardware self-check, however, it is recommended to go to the official after-sales service of the notebook for specific testing.

In this case, the PE in the USB flash drive is not compatible with the new device, and the hard disk is not recognized; You should select win8 or win7pe in the boot U disk (if the U disk does not have it, you can redo a boot U disk), and after startup, you should see the partition drive letter of the hard disk in the explorer before you can further install the system.