CAD shortcuts can be set by yourself

In CAD, keyboard shortcuts can be used to issue commands to complete drawing, modification, saving and other operations. So do you know how to add shortcuts to CAD? The following is the method I have put together, and I hope to give you an answer.

How to add shortcut keys to CAD:Step 2: Pull down the scroll bar on the right side to the approximate middle, and you will see a lot of shortcuts in the front, * in the middle, and the full name of the command in the back.

Step 3: Write the command you want to use the shortcut key after the * sign, write the shortcut key before the * sign, refer to the writing of other shortcut keys, and then save-exit. Turn off the CAD and restart it.

<>2, after the shortcut file is opened, the interface is as follows:

3. Modified document interface:

4. Modify the command example: if you often use the chamfer command, but the mouse operation is too laborious, then set this command to a shortcut (set in a convenient position, it is recommended to be a number key or a number key combination). Chamfer:

amcham2d dim, (click on the chamfer command icon to find it in the command bar), set the keyboard input: 00, save the file, and close the file.

<>5, enter the CAD interface, enter the command: reinit, and check the "pgp" file. "reinit": initialization.

6. After initialization, enter: 00, and the command is displayed as chamfering. The modification was successful.

<>2, after the shortcut file is opened, the interface is as follows:

3. Modified document interface:

4. Modify the command example: If you often use the chamfer command, but the mouse operation is too ingenious, then set this command to a shortcut (set in a convenient position, it is recommended to be a number key or a number key combination). Chamfer:

amcham2d dim, (click the chamfer filial piety shouting command icon, you can find it in the command bar), set the keyboard input to 00, after saving the file, close the file.

<>5, enter the CAD interface, enter the command: reinit, and check the "pgp" file. "reinit": initialization.

6. After initialization, enter: 00, and the command is displayed as chamfering. The modification was successful.

More and more people are using CAD drawing software, and only drawing skills affect speed and quality. Now I'm going to teach you how to add CAD2014 shortcuts.

1.First, open the CAD software to enter the drawing interface, and then click the tool items in the menu bar.

2.Then move the mouse over the penultimate row (custom) column and select the lowest item (program parameters) in the subsection.

3.The ACAD-Notepad document will pop up, which is the program file for the shortcuts.

4.Pull this document to the bottom and you'll see (**no xlate; do not remove), 5Looking at the above document, that is the format of the shortcut key, 6

Then it's a reference to the shortcut format above, add items, pay attention to the rules of formatting, I'm talking about the rules here, 7Pay attention to the rules of formatting, I am talking about the rules here, the single letter in front of the row is the abbreviation of the shortcut key of the cad command, and the multi-sub-parent word after the row is the full-letter command of the cad command, according to this rule after the arrangement is saved, and then close the cad, reopen the software to use the shortcut command key. ;

<>2, after the shortcut file is opened, the interface is as follows:

3. Modified document interface:

4. Modify the command example: if, often use the chamfer.

However, if the mouse operation is too strenuous, then set this command to a shortcut (set in a convenient position, it is recommended to use the number keys or number key combinations). Chamfer: amcham2d dim, (click the chamfer command icon to find it in the command bar), set the keyboard input:

00, after saving the file, close the file.

<>5, enter the CAD interface, enter the command: reinit, and check the "pgp" file. "reinit": initialization.

6. After initialization, enter: 00, and the command is displayed as chamfering. The modification was successful.

1. Open CAD, menu tools custom program parameters, pull to the bottom after opening, there are the full names and shortcuts of most commands.

2. The next thing is to modify, before modifying, you have to design the content of the modification, note: the modified shortcut key can not be repeated with the original shortcut key, that is, it can not affect other shortcut keys, and you have to remember your own modifications, and each modification is best and clear. Generally, change your usual shortcut key to Single Letter near the left-hand side.

3. The following examples:

In"Tools - Custom - Custom Files - Program Parameters"。In this text, take the l -line, and change this l to your own convenience da. Then close the window, click"Yes"Save.

Close the CAD again. Then reopen the CAD, this is to draw a straight line just need to enter the DA, you can...With this method, you can change all the commonly used shortcuts to a few letters controlled by the left hand.

It's just that you need to memorize the shortcut keys again.

F1: Get help F2: Switch between the drawing window and the text window F3:

Control whether to achieve automatic object capture F4: Digitizer control F5: Isometric plane switching F6:

Controls how coordinates are displayed on the status line f7: raster display mode control f8: orthogonal mode control f9:

Raster snap mode control.

Hehe, I really don't know how to do the method upstairs.

1. Tools Customize interface (pop up the custom interface) 2. Find the icon you want to set the shortcut key under the command list.

3. Select the icon and drag the left mouse button to the "Keyboard Shortcuts" at the top of the interface.

4. Drag it into the "Shortcut Key" and select it, and then a "Feature" will appear on the right side of the interface

5. Select the "key" below the feature bar, enter the shortcut key you want to code, and OK.

If you are not sure, please ask!

Tools-Custom-Program Parameters - Save and Exit - Enter "reinit.""- Check "pgp" — OK.

Upstairs is.

The correct way to set CAD shortcuts is: Tools - Custom - Program Parameters.

After setting up your shortcut in an open file.

Just restart the CAD. Define it once.

Perpetual use. The premise is that you can read English.

If you won't, come to me.

The second floor is quite right. Indeed from"Program parameters"to set shortcut keys. But be careful when you go in and set it up yourself.

If you set it up incorrectly, the software will go wrong. In fact, CAD also has a lot of command shortcuts, you can also go to the Internet to look them up. Write down those commonly used ones, and you will definitely get twice the result with half the effort when drawing.

Tools-Custom-Program Parameters.

Do you have any restore software installed on your computer? Restore the elves such as: freezing point or something? If you have installed it, you must close the restoration software first, set up the CAD shortcut key after starting the computer, save and exit the CAD program, and then start the restoration software!

How to customize shortcuts in CAD.

CAD setting shortcuts are easy to get on and not easy to get jealous of.