How to make a photo frame out of paper specific steps .

Step 1: First prepare a square paper of different colors on both sides (in fact, the same color is fine), fold the top and bottom sides together to press out the traces, and then.

Step 2: Cut the paper into two parts of the same size along the crease in the middle.

Step 3: Take a part (half a sheet) and fold the two short sides in half, and then leave a crease. Then fold the left and right short sides to the middle crease, align the two short sides with the crease, and then leave a crease on the left and right sides.

Step 4: Fold the left and right short sides to the two nearest creases on the left and right, align the short sides with the creases, and then leave the creases.

Step 5: Fold the left and right short sides to the two nearest creases on the left and right, align the short sides with the creases, and then leave the creases (the method is the same as in step 4).

Step 6: Fold the upper right corner, align the short side of the right side with the long side below, you only need to press a new crease between the corner of the lower right side and the nearest crease, and then leave a crease.

Step 7, Fold the lower right corner to the third crease on the right, the edge is aligned with the crease, you only need to press the new crease between the third crease and the second crease, and then.

Step 8, take the intersection of the two creases on the right side as a reference, fold it up, you only need to press a new crease between the second crease and the first crease, and then.

<> step 10, the upper left corner also follows the method of the lower right corner to obtain such a shape part (note that the notches in the upper left and lower right corners are facing inward).

Step 11: Fold the other half of the paper into this shape in the same way.

Step 1: Prepare the documents.

Before making it, it is necessary to prepare some basic materials, choose a picture frame paper, metal rings, and wooden brackets that match the size of the photo you want to decorate.

Supporting materials: Decorative bands may have lace straps, small decorative images made of felt, and other decorative bands can be selected.

Step 2: Hang a metal ring on the frame paper.

First of all, hang a metal ring on the photo frame paper, the ring must be bought when purchasing, and it is best to open the metal ring, and you can put as many photos as you want in the photo frame in the future.

After the metal rings at both ends are threaded, place the side of the photo on it.

Step 3: Place the prepared photo frame paper on the wooden rack that has been prepared before. You can retouch our album and then put the photos in, it will look more beautiful, and if you want to save time, you can also paste the photos directly.

Step 4: Cut the paper that has been prepared to decorate the cake 1 4 size, and the cake paper must be folded in half before cutting, so that there will be no big mistakes.

Step 5: Paste the cake decorating paper you just cut on the picture frame paper. The cake decoration paper should not be attached to the edge of the photo frame paper, and there should be a little gap, so that it will be more beautiful when the photo is posted.

Step 6: Paste the cake paperIn the future, we can paste the photos of the animals we have prepared, and a photo album is completed. However, it seems that the area around the photo frame is not too simple, and it can also be decorated.

Method steps.

1.The first step is to prepare the necessary materials.

As mentioned above, only use paper, of course, first find a thicker piece of paper, for example, it can be part of the packaging box, preferably thicker and harder.

Finally, there is double-sided tape and a paper cutter, and of course you will also use a ruler.

<>3.Put ** on the hardpaper you just cut to see if it is suitable, if it is too big, cut off the appropriate margin (ensure that the hardpaper is slightly larger than **).

<>4.The following is to make the border of **, that is, to fix ** in the frame.

Choose the prepared white paper and cut it to the appropriate size. Then fold it in half. Stick double-sided tape on both sides, and finally fix it on the top of the base to <>

<>5.Insert ** into the border you just made.

6.Here's how to add a border to it with three sides.

According to the length of the frame, cut out the same length of white paper. Fold it in half, then open it, and fold both sides in half toward the center line you just folded.

<>8.The remaining two sides are made in the same way, and the main part of the picture frame is done.

But you can see that there is too much blank space at the top, so cut off a part appropriately and then make the border, it will look a little better.

<>9.Finally, make the back of the frame to lean.

Again, select the same width of cardboard, cut out a strip of appropriate width, and fold it as shown. Fix the middle with double-sided tape, pay attention to the picture, and leave a small part of it, which is used to paste double-sided tape and paste it on the back of the photo frame.

10.Fold the area left as shown in the picture above to the left and right, apply double-sided tape, and fix it in the appropriate position on the back of the frame. The picture frame is ready. Let's see, isn't it very good-looking, I believe you don't need to buy your own photo frame in the future, make your own.

First put the photo on the paper, draw a circle of borders around **, take the photos away, and then draw a circle on the inside of the frame about one or two centimeters, and then draw a circle on the outside about five or six centimeters, cut off the middle and outside, and finally only decorate it according to your own preferences!!

It is simple and practical to make a photo frame with paper, so let's make a paper photo frame.

Colored paper, colored pencils, scissors, glue sticks, rulers.

01 Cut a rectangular piece of colored paper with scissors.

02 Fold the rectangle of colored paper in half, open it again, and draw a rectangle in the middle of the bottom half with a colored pen and ruler.

03 Use scissors to cut the drawn rectangle into an empty one.

04 Glue the left and right sides of the colored paper, glue the two sides together, the top is not sticky, and leave an opening for inserting photos.

05 Cut a small strip of paper from the colored paper and glue the ends together to form a droplet.

06 Pinch out two sides from the bottom of the paper slip by hand to make a frame holder.

07 Glue the top of the bracket and glue it to the back of the frame.

08 Insert the photo from the top of the frame, then stand the frame up, and the paper frame is ready.

<> "Teach you how to fold a photo frame with paper.

Cut the square paper in half.

Take half of the rotten suspicion and fold it in half to create a crease.

Fold it in half again and fold out the crease.

Fold in half along the secondary crease.

Fold it in half one more time.

Fold a diagonal crease.

Take the third crease as the standard, and fold the green crease. The circle is the intersection point, and the hail calendar is on the left side of the intersection point, press the source and let the red dotted line press gently.

According to the creases of the previous steps, pinch the paper into the shape in the diagram. The same is true on the other side.

The other sheet of paper is folded in the same way.

Intersperse the two parts with each other, and a picture frame is complete.

1. Take a piece of paper, not too big, look good, and the color is better. Put the ** on it and cut out the paper that is slightly larger than the edge.

2. The edges should be left out and used to hold the photo.

3. Cut out a good-looking lace, which can be wavy, can be sawtooth, can be a small rectangle, how to look good. Random.

4. You can cut all four sides into lace, and you won't die when you look at it. The bottom two sides are folded. Glue the overlap (where the scissors hold it down).

5. Erase the pencil marks and fold a small corner in the upper left corner to fix **.

6 So that I can stick a small picture frame on the wall, and I used tape paper with a pattern to make it look cute.

A few more are pasted on the wall, and it feels very good.

Materials: Do you have a large box for food or beverages at home? Most of these boxes are made of corrugated cardboard with rows of small holes in the center. With it, you can make a variety of unique frames.

Production Steps:1Cut the corrugated cardboard into two pieces of the same size, one of which is dug out of the shaded part.

2.Insert a paper clip along the small holes in the two pieces of cardboard and secure it (the same top and bottom), and a picture frame is ready.

3.Thread through the lower part and pull out from the upper part to hang the frame.

4.Remove the upper part of the paper clip and you can freely exchange the picture. Since corrugated cardboard is easier to work with than wood or metal, you can design it in a variety of shapes and apply beautiful colored paper to the cardboard frame to add a sense of beauty.

Animal creative collage DIY photo frames, decorating the wall is very fulfilling!

It doesn't cost much to buy a piece of wood.

Material: cotton, cardboard.

Tools: needle and thread, cardboard, scissors, double-sided tape, ruler, pen, PP cotton.

Steps: 1. Draw the size of the photo frame on cardboard (the kind of cardboard used in general shirts) as needed, and then cut it with scissors for later use.

2. Cut the size of the cotton cloth according to the size of the cardboard frame. Note that it must be larger than the cardboard frame to wrap the cardboard.

3. The circle inside the photo frame is wrapped and fixed first, and then filled with a thin layer of PP surface, which will have a more three-dimensional effect.

4. The circle outside the photo frame, I sewed it with a needle and thread, because the cardboard is not very thick, so there is no problem. Moreover, the traces of needlework and thread on the outside also appear very textured.

5. Make a picture frame with cardboard and glue it with double-sided tape. The back of the bottom can be made into a bracket, which is easier to place.

6, the photo frame is basically done, the outside can also be decorated with other gadgets, lace can be used (this kind of lace is more than 1 meter for 1 yuan, like DIY mm must always be available).

7. Now put in your favorite ** OK.

Tools Raw materials.

Cardboard, double-sided tape, scissors, utility knife, watercolor pen, hot melt adhesive, color cloth method steps.

1. Cut a rectangular piece of cardboard with a utility knife, draw the inner frame of the photo frame with a watercolor pen, cut off the inner surface with a utility knife, cut out the opposite flower cloth with scissors, and cut it from the middle.

3. Then use a utility knife to cut out a rectangular piece of cardboard (equal to the size of the outer frame of the frame) as the back of the photo frame, and use a utility knife to carve a groove on the back of the photo frame.

4. Use double-sided tape to glue the back plate of the photo frame with the glue of the photo frame, the left and right sides and the bottom edge.

5. Cut two pieces of rectangular cardboard, paste the cloth with double-sided tape, and make the support on the back of the photo frame.

6. Glue the finished support frame to the back panel of the photo frame with hot melt adhesive, and a beautiful fabric photo frame will come out.

Precautions. The size of the inner frame of the photo frame should be smaller than the one put in, otherwise, it will be easy to fall out.

The photo frame is generally better looked at if it is not done with a color contest.

Utility knives and scissors are dangerous business, so be careful not to hurt yourself when cutting.

DIYS: Teach you how to make a photo frame out of cardboard, the steps are detailed, the difficulty is 2 stars, the color is free to match, simple and creative!

Just crop it according to the existing frame.

Well, if it's pasted on the window, it's very simple! Use scissors to cut out a square cardboard that is a little larger than the photo, and then cut a square cardboard that is a little smaller than ** in the middle of the cardboard (that is, dig a hole in the middle of the cardboard), draw with a pencil on the left frame cardboard, and cut out the part you don't want to .........You can also cut cute graphics and fix them on a few corners of the **, so that it is convenient to paste.

The following steps are available for reference:

Preparation tools: cardboard, double-sided tape, scissors, utility knife, watercolor pen, hot melt glue, color cloth Cut a rectangular piece of cardboard with a utility knife, draw the inner frame of the photo frame with a watercolor pen, cut off the inner surface with a utility knife, cut out the opposite flower cloth with scissors, and cut it from it.

Then use a utility knife to cut out a rectangular piece of cardboard (the same size as the outer frame of the frame) to use it as the back plate of the frame, and use a utility knife to carve a groove on the back plate of the frame.

Use double-sided tape to glue the back plate of the photo frame with the left and right sides of the photo frame and the bottom edge.

Then cut two pieces of rectangular cardboard, and paste the cloth with double-sided tape to make a support on the back of the photo frame.

Glue the finished support frame to the back panel of the photo frame with hot melt adhesive, and a beautiful fabric photo frame will come out.

Material Preparation:

A piece of waste paper shell (the size depends on **); One piece of cardboard of different colors; a plastic board (the size is the same as cardboard); A piece of wrapping paper.

The photo frame is a very interesting thing, and if you put a commemorative ** in it, it will be particularly feeling. When we were students, I believe many of us had this experience. Below, I will teach you a DIY cardboard photo frame making steps, super simple, come and learn it.

1. Preparation of preliminary materials.

Cardboard, double-sided tape, utility knife, watercolor pen or paint, colored cardboard, hot melt adhesive, wolfberry, soybean, etc.

2. Cutting cardboard.

Use a utility knife to cut out a rectangular piece of cardboard, draw a picture frame between 11 cm and 8 cm, and cut it off with a utility knife. Note that the cut out part should be smaller than **, so that ** will not fall out of the frame. Tear off the glossy paper from the surface of the cardboard to reveal the inner layer of hair.

Third, the use of double-sided tape.

Use a utility knife to cut a rectangular piece of cardboard about 17 cm 13 cm as the back of the photo frame, and use double-sided tape to glue the back of the photo frame and the photo frame together.

Fourth, the "color" on the photo frame

Depending on your preference, you can draw branches on the frame. Let the children draw some leaves on colored cardboard, cut them, glue them to the "branches" with double-sided tape, and then make wolfberries and soybeans into small flower shapes, and glue them to the "branches" with hot melt glue.

5. Bracket. Use a utility knife to cut a rectangular piece of cardboard about 13 cm 5 cm, 3 cm away from one end and gently scratch it with a utility knife, and then fold it in half to make a support frame on the back of the photo frame, and glue it to the back of the photo frame with double-sided tape.

6. Detail correction.

After the photo frame is made, check whether there are some small details in the frame, such as uneven edges of the frame, the tape is not properly pasted and leaks, etc., and these things can be officially completed after eliminating these things.