What are the contents of the National Registered Supervision Engineer Examination? What is the best

Exam subject setting.

The exam consists of 4 subjects, specifically:

Basic Theory and Related Regulations of Construction Engineering Supervision", "Construction Project Contract Management", "Construction Project Quality, Investment and Progress Control", "Case Analysis of Construction Project Supervision". Among them, "Case Analysis of Construction Project Supervision" is a subjective question, which is answered on the test paper; The remaining 3 subjects are all objective questions and are answered on the answer sheet.

Candidates are allowed to bring a fountain pen or ballpoint pen (black or blue b pencil, eraser, calculator (silent, no storage function) when taking the test.

The examination is divided into 4 half-days, and the examination time of "Engineering Construction Contract Management" and "Basic Theory of Engineering Construction Supervision and Related Regulations" is 2 hours; The examination time of "Engineering Construction Quality, Investment, and Progress Control" is 3 hours; The duration of the examination is 4 hours.

Exam time. The 2008 exam will be held from 10 May to 11 May.

What is the main test of the supervision engineer.

Supervision engineer refers to the national unified examination qualified, obtained the "supervision engineer qualification certificate" and registered engineering construction supervision personnel. The supervising engineer monitors the quality of the project on behalf of the owner and acts as a bridge between the owner and the contractor.

Not only does the practitioner need to know engineering and costing, but he also needs to be very aware of the building regulations.

Supervision engineer qualification examination passed, by the provinces, autonomous regions and municipalities directly under the Central Government personnel (vocational reform) departments issued by the Ministry of Personnel, the Ministry of Personnel and the Ministry of Construction with the People's Republic of China "Supervision Engineer Qualification Certificate". The certificate is valid nationwide.

Since 1997, the national supervision engineer qualification examination has been officially held. The examination work is jointly responsible for the Ministry of Construction and the Ministry of Personnel, and the daily work is entrusted to the Construction Supervision Association of the Ministry of Construction, and the specific examination work is entrusted to the Personnel Examination Center of the Ministry of Personnel to organize and implement.

The exam is held once a year, and the exam is generally scheduled in mid-May. In principle, test centers will be set up in provincial capitals. The examination is conducted on a two-year cycle, and those who take all subjects must pass all subjects within two consecutive examination years.

1. Textbook purchase:

Book at the test store in the above cities, or book online (treasure network, etc.), and the textbook will be released, and then go to pick it up.

2. Course of Study:

1. Construction project contract management.

2. Quality control of construction projects.

3. Progress control of construction projects.

4. Investment control of construction projects.

5. Introduction to construction project supervision.

6. Construction project information management.

7. Laws and regulations related to construction projects.

3. Examination content:

1. Construction project contract management (total score: 110 points).

2. Construction project quality, investment, progress control (total score: 160 points).

4. Case analysis of construction project supervision (total score: 120 points).

In December of each year, the provincial personnel examination network, the examination time, generally in May of the following year.

The examination for registered supervision engineers consists of four subjects: "Basic Theory of Construction Engineering Supervision and Related Regulations", "Construction Engineering Contract Management", "Construction Engineering Quality, Investment, Progress Control", and "Construction Engineering Supervision Case Analysis".

The 2020 Supervision Engineer Qualification Examination consists of four subjects: "Basic Construction Engineering and Related Regulations", "Construction Engineering Contract Management", "Construction Project Objective Control" and "Construction Engineering Supervision Case Analysis". Among them, "Basic Theory of Construction Engineering Supervision and Related Regulations" and "Construction Project Contract Management" are the basic subjects, and "Construction Project Objective Control" and "Construction Engineering Supervision Case Analysis" are professional subjects.

The professional subjects of the supervision engineer professional qualification examination are divided into three professional categories: civil engineering and construction engineering, traffic and transportation engineering, and water conservancy engineering. Among them, the Ministry of Housing and Urban-Rural Development is responsible for the major of civil engineering and construction; The Ministry of Transport is responsible for the traffic and transportation engineering major; The Ministry of Water Resources is responsible for the major of water conservancy engineering.

The professional qualification examination for supervision engineers is divided into 4 half-days.

National Registered Supervision Engineer Examination Requirements:

All subject examination conditions.

1) Conditions for taking the examination of all subjects (four subjects):

1. College degree or above in engineering technology or engineering economics, in accordance with relevant national regulations, obtained intermediate positions in engineering technology or engineering economics, and served for 3 years.

2. In accordance with the relevant provisions of the state, obtain senior positions in engineering technology or engineering economics.

Conditions for exemption from examinations.

2) Conditions for exemption from some subjects:

Candidates who are engaged in engineering construction supervision and have the following four conditions at the same time can be exempted from the two subjects of "Construction Project Contract Management" and "Construction Project Quality, Investment and Progress Control".

Graduated from technical secondary school (including technical secondary school) or above in engineering technology or engineering economics before the year (including 1970);

2. In accordance with the relevant provisions of the state, obtain senior positions in engineering technology or engineering economics.

3. Engaged in engineering design or engineering construction management for more than 15 years;

4. Engaged in supervision for 1 year.

Grades are valid.

Those who take all 4 subjects must pass all subjects within two consecutive examination years; Personnel who meet the exemption from some subject examinations must pass the prescribed two subject examinations in an examination year to obtain the supervision engineer qualification certificate. Compiled by China Engineering Supervision Talent Network.

Supervision engineer examination two basic subjects and two professional subjects, professional subjects are all levels of the examination to be examined, basic subjects can apply for exemption, but to meet the exemption conditions, and supervision engineer additional items do not need to participate in two basic subject exams.

Supervision Engineer Exam Subjects:

Professional subjects: "Construction Project Objective Control" and "Construction Project Supervision Case Analysis".

Supervising engineer application conditions reference:

Examination four: Those who abide by the Constitution, laws and regulations of the People's Republic of China, have good professional quality and moral character, and have one of the following conditions, can apply to participate in the professional qualification examination of supervision engineers.

1) Have a college degree (or higher vocational education) in various engineering majors, and have been engaged in engineering construction, supervision, design and other business work for 4 years;

2) Have a bachelor's degree or degree in engineering, management science and engineering, and have been engaged in engineering construction, supervision, design and other business work for 3 years;

3) Have a master's degree or professional degree in engineering, management science and engineering, and have been engaged in engineering construction, supervision, design and other business work for at least 2 years;

4) Doctoral degree in engineering, management science and engineering.

Approved to carry out the pilot area, apply to participate in the supervision engineer professional qualification examination, should have a bachelor's degree or above.

Two exams: If you have one of the following conditions, you can be exempted from taking the basic subject Bidong Insight Examination for participating in the supervision engineer professional qualification examination for Pige.

A) has obtained the highway and water transport engineering supervision engineer qualification certificate;

B) has obtained the qualification certificate of water conservancy project construction supervision engineer;

Additional majors: has obtained one of the three professional qualification certificates of the supervision engineer examination, and the rest of the professional subjects can be exempted from two basic subjects, and the three majors of the supervision engineer are civil engineering, water conservancy and transportation.

Get free supervision engineer learning materials and knowledge maps.

First look at the "Basic Theory of Construction Engineering Supervision and Related Regulations" and "Construction Project Contract Management", and then study "Target Control", with the accumulation of knowledge and the foundation of the previous few subjects, and then carry out the study of "Case Analysis".

Among these four subjects, it is recommended to study "Basic Theory of Construction Engineering Supervision and Related Regulations" and "Construction Engineering Contract Management" first, because the content of these two subjects is envied by a lot and the score is higher.

There are many similarities between "target control" and the valuation and management in the cost, and you can learn "target control" after learning the basic theory of construction project supervision and related regulations and "construction project contract management".

With the accumulation and foundation of the knowledge of the previous subjects, it is enough to study the "Case Analysis".

Characteristics of the Supervision Engineer Examination Subjects:

1) The examination is more difficult, the content is more, and the review time is longer.

2) The more difficult in the professional stage is the two subjects of three controls and cases, which involve three textbooks "Construction Project Investment Control", "Construction Engineering Quality Control" and "Construction Project Progress Control", which have more content and involve a lot of calculation parts, and the case is the most difficult subject.

3) Contract and regulations are relatively simple subjects compared to the other two subjects, and it is best to match them with the other two difficult subjects, and candidates who apply for the exam for the first time should not only apply for these two subjects.

The above content reference: Encyclopedia - Supervision Engineer.