CAD2014 appears in the education version of how to remove

1. Open the CAD software, and open a drawing containing "AutoCAD Educational Product Production", when you open the drawing, the prompt interface will prompt "Educational version printing stamp detected".

2. Click the big "A" in the upper left corner to select the file and click Print (you can also use the shortcut key CTRI+P) to open the printing interface.

3. Select the printing range as the window, and then select the drawing.

4. When you click the preview in the lower left corner, you will find that "AutoCAD Education Product Production" is available on all four sides of the drawing.

5. Right-click the mouse, click the exit key, and click the big "A" in the upper left corner - File - Save As (you can also use the shortcut key ctri+shift+s), change the file type to AutoCAD2007DXF (*.).dxf), click Save.

6. Close the original drawing, click Open in the upper left corner, select the file location in the storage location of your dxf file, and change the file type to dxf (*.).dxf), then click on the previously saved file, and click Open.

7. Select the print preview, and the print preview drawings will remove the "AutoCAD Education Product Production".

Turn it on. dwg file, save as. DXF file, and then open this with CAD. dxf file, you can find that the imprint of the education version has been removed, and then another one. dwg file, done.

Here's how to remove the AutoCAD Education logo from a drawing:

1. After the drawing of the education version of the CAD drawing is printed, there is an extra stamp of the education version, and it is divided into two steps to convert it to the normal version (that is, to remove the stamp of the education version of the CAD): (1) Open the drawing with AutoCAD software and save it as. DXF format and close the CAD; (Blind upgrade to do 2) re-open the AutoCAD software, and then open the one you just saved.

DXF format, and then save as. DWG format (i.e. reverting to a CAD file), you can remove the logo of the Teaching and Grinding Balance.

2. Precautions: If the AutoCAD software opens the smile just now. DXF format file, the command line prompt is invalid, it is recommended to open it with a higher version of AutoCAD software, and it is better to save it to a lower version (generally save to the 2014 version).

"Green version, how to use:

1.Open the CAD software. Open the software again and select Force Stamp Removal.

2.Open the DWG file you want to remove the imprint from and save it.

3.The saved file is the DWG with the educational imprint removed.

The alternative is that you don't need to convert the software, you just need to save the file as. dxf file and then open it. DXF file, save into. dwg will do the trick. "

CAD is a professional drawing software, many users in need will install the application in the computer, but there are unfamiliar friends in use, it is not clear how CAD cancels the educational version of the watermark, so for this problem, today this article for you to share is about the detailed steps of CAD to the education version of the watermark.

Here's how:

Method 1: 1, first of all, I open the CAD drawings of the bridge foundation, pop up the prompt as shown in the figure below, here we are currently unable to cancel, through the steps to solve this problem, by clicking on the first prompt to enter the next prompt.

2. The next prompt pops up as shown in the figure below, and you can enter the next link by clicking the Continue button, as shown in the figure below.

3. Then we use CTRL+P to browse what the print stamp looks like, by executing the print command. Enter the printing interface, select the printer, printing style and other information, and then click Browse to view, as shown in the following figure.

Method 2: 1. Next, let's talk about how to cancel the process of printing stamps, save as through the ctrl+shift+s shortcut command, and save the existing drawing as through the red box settings in the following figure after opening save as. DXF format.

2. By finding the location of the converted file as shown in the figure below, the converted file format is. DXF file.

3. By double-clicking this elimination again, there will be no more prompts to print stamps, and save again to convert the storage format to. dwg file to complete the steps to cancel the print stamp.

The above is the detailed steps of CAD to go to the education version of the watermark, netizens in need can follow the above steps to operate Sensheng.

To cancel the educational version of your CAD software, you can follow these steps:

1.First of all, open the CAD software and enter the interface of the software.

2.Find the "Help" option in the menu bar at the top of the software interface and click on it.

3.In the Help menu, look for and select the License Manager or similar option. Stupid.

4.When the License Manager window opens, information about your license is displayed. Look for and select "Cancel License" or a similar option.

5.In the window to confirm the cancellation of the license, you may need to enter the relevant license information or perform other confirmation actions.

6.After clicking Confirm, the license will be cancelled and the educational version of the CAD software will be discontinued.

Generally, you can save it as dxf, open the dxf file, and save it as dwg. There is also a tool dedicated to removing the educational version that you can try.

1. Save the file as: Select the bxf format in the Save As option drop-down box and put it on the desktop. Reopen the file and save it as dwg.

2. Find a software on the Internet called CAD Education Edition Killer and get it.

It's difficult! You can convert files to other formats, lower versions other than DWG! But there's always something missing!

You don't need the educational version of CAD, there are a lot of them on the Internet!

There's a CAD antivirus software, adopt, I'll send you an email?

1. First of all, let's take a look at the opening of the drawings of the education version, it will prompt that you are made by the education version, if you choose to cancel below, the drawings will be opened without displaying the content, so you can only choose"Continue with the current operation"

2. Immediately remind you, the text will be in the printed drawing"by Autodesk.

Production of educational products"We have only a choice"Continue", otherwise the drawing cannot be opened.

3. Let's see the print preview of the drawing in the print preview first, there will be"Autodesk for Education product production"Words.

4. After exiting the preview, we will re-"save as" the file.

5. In the pop-up interface box, the first column of the file is automatically considered"dwg"format, put it in"dxf"Format, as shown in the second column of the action, click"Save", close CAD

6. We can look at the files we just started and the files we resaved, and we have the file suffix.

Disconnect and open the drawing in "DXF" format.

7. When everything is done, we open it again"dwg"The format, i.e. the file that was successfully replaced, when we open it, we can view the print preview and delete it"Powered by Autodesk Education Products"The words have been deleted.

1.Open any other version of AutoCAD that is not an educational version, whether it is 2006, 2005 or 2004.

2.Open the file that has already been saved in the Education Edition, then save as and select it in the File Contents section"*.dxf"formatted.

3.Close the file and open the dxf file you saved as a.m.

4.Save as a dwg file.

Cause: The AutoCAD version installed or installed is 2006 Education Edition.

Removal method: Save file --- as--- on the file type: "AutoCAD 2000 LT2000 DXF(*.)."dxf)" - save.

Open this dxf file and save it as again"AutoCAD 2004 Graphics (*.)dwg)"Format.

So that the print stamp is gone. If it appears:

I save as AutoCAD 2000 LT2000 DXF (*.).dxf)" format.

But I can't open it when I open it again"There is an error in the block record table.

Invalid Symbol Table Record Name: Line 4952.

Invalid or incomplete dxf input -- the drawing is discarded. "I had to fix it

There are also those who think:

1.Saving the image file as an R12 DXF file should be eliminated.

2.Change the file in the CAD root directory to a different name or delete it to eliminate the print stamp.

3. Start CAD, point"Help --- about --- product information --- activation"Use the keygen to regenerate the registration code of the commercial version to register, and you can enjoy the commercial version.

1. When printing, there is a "print stamp" option on the printing equipment tab, try to remove it.

There are five ways to do this:

1. Directly save the educational version of the print stamp as DXF, then close the CAD, and then run the CAD to open the saved DXF and save it as DWG to print to eliminate the stamp.

2. Use other DWG version conversion tools (such as ACMECADconverter) to convert to R14 version, and then open it with a higher version, most of them can be solved, and some still can't be solved.

3. Open it with domestic CAD software (ZWCAD, etc.), save it, and then open it in AutoCAD to clean up the stamp information.

Fourth, change the file in the CAD root directory to another name or delete it to eliminate the printing stamp.

5. Save it as a dwt template file, and then save it back to dwg after opening it.

Open the CAD and save it as a 2000DXF file, then turn off the CAD and save it as a DWG file after opening the DXF file. (Note that CAD version 08 or higher should be used).