How to use a hub to access the internet in your dorm room

You're going to need it again.

Buy a network card (hardware, ranging from 15 to 30**) and plug it into the motherboard slot of the host.

Then when the host's online neighbor-property is turned on, there will naturally be an extra local connection 2.

I suggest: after installing the network card, plug the network cable connected to the school port and plug it into the network card integrated by the motherboard, which is the original network card, 1Then set the IP of the original NIC (that is, maintain the status quo of the original settings).

ip,,subnet mask is, gateway is, dns is.

Note: After setting the IP, and then confirming, switch the label of the property dialog box from General to Advanced, and check Internet connection sharing, this option, otherwise you can't share the Internet, be sure to check it.

2.Then set the IP of the local connection 2 that you bought and plugged in

IP is, subnet mask is, gateway is, and DNS is.

The IP of the other computer is accordingly from the beginning.

Don't set it, usually set it to automatically get the IP, just set the DNS to be enough.

Well, the landlord needs to buy a router, for example, the good one you buy now, TPLINK-402M, it's only 90 to the ocean, and you can get it for 10 yuan each.

Then, the WAN port of the broadband incoming router, this router has 4 LAN ports, which can connect 3 computers and a 4-port hub, and the 4-port hub is connecting 3 computers, so that you can share the Internet.

But be careful, you share the same bandwidth, although it is not evenly divided, but the more people, the slower the speed of personal use, that's for sure.

Supplements

Buying two routers? What do you mean, landlord?

Why do you want to buy two routers? Why buy two? Of course, it's okay to have a lot of money, haha.

A router and a hub are already done, buy another router? I don't know what the main purpose of the building is.

Buy a router, this is the easiest way, it's a router, not a hub.

Or, find a computer, install two network cards, and use them with the hub.

A router will do. It is recommended to buy 8 heads, and 6 heads may not be so good to use, so pay attention to them when you buy them"Bandwidth", buy the same or slightly larger bandwidth as your broadband bandwidth.

Your dorm room is really untalented.

It's a girls' dormitory, right?

Buy router wow (so loud).

Yes, but the premise is that your cat should support multiple users, if it is not supported, it is most convenient to use a router, and you can save the hub, if you don't want to use a router and only want to use a hub, you need a computer to do it, the most convenient thing to do is to use third-party software, of course, you can also use dual network cards.

Yes, no problem, a hub, a cat.

Theoretically, hubs and switches are not much different in function.

In the dormitory, we use the hub

The main thing is the cat with the routing function.

Use a hub for small networks

Switches are used for large networks.

If your cat doesn't have a routing feature, you'll have to buy a router. The switch and the hub are to achieve the same function, but the hub (that is, the hub) and the switch implement different mechanisms, and the efficiency is much worse than that of the switch, and now there are more than 100 switches with 6 ports. Of course, you can also consider buying a router with multiple openings, so that you don't need to buy another switch.

Specifically, you can go to the computer city to decide again.

The router mainly implements ADSL sharing, and it can allocate and manage the IP of the intranet. However, switches and hubs cannot directly connect to ADSL. Therefore, the ADSL modem should be used to demodulate the signal and send it to the router, and the router will perform virtual dial-up and establish a connection with the interconnection.

The router itself can share and allocate its connections, and can configure and manage the IP of the intranet, so as to realize the sharing of ADSL.

How to connect.

1.ADSL modem Under the default setting, the network cable is connected to the up port of the router, enter the router configuration interface (there are specific operations in the manual) to set the dial-up of the routing mode, and then set the IP of the intranet, etc. Connect the UP port of the switch to the router, then connect all computers to the switch, and set the IP and gateway.

The IP should be within the same IP segment of the router and within the range that the router can assign. The gateway is the IP address of the router, and the subnet mask is set according to the router's settings. DNS can be asked with your local Netcom company.

2.Same as above, but if your router has 6 lower ports, you can skip the switch. The computer is connected directly to the router. The specific settings are the same as above.

PS: When you set the routing mode, you need to know the PVI and VCI values of the local Netcom ADSL.

Use the route, save a lot of problems, no need to dial, just set your username and password on the route, the route is long open, and two computers can access the Internet at the same time or separately at any time. A router like D-Link's, ** generally between 90-250.

Hubs and switches need to manually set up dialing, which is not as convenient as routers, **between 40-80 yuan.

If the hub is 100m bandwidth. The bandwidth of the 6 machines is divided equally. That is, the LAN is more than 10 m. per unit

If the router is 100M bandwidth. The speed of each machine in the intranet is also 100m each.

Switches are generally expensive and are not recommended.

It is recommended to buy an 8-hole router.

If there are no more than four machines, generally speaking, the router is more convenient, if there are more than four, if it is equal. Eight routers are a little more expensive, and it's not very cost-effective for the dormitory, so it's better to buy a switch.

The router has a routing function, which can be shared by multiple machines, and the hub only plays the role of splitting lines or connecting to the intranet, if your modrem does not have a routing function, and you want to connect 6 units to the Internet together, you can only use an eight-port router

You can surf the Internet at the same time, but the speed can't be reduced. A router is recommended. And the router is easy to set up. 8-hole routing is sufficient.

If you live in a dormitory, it shouldn't be ADSL dialing, so it is recommended that you buy a small switch.

Small routes can also be used, and they will not be used after graduation, and they can also be used at home!!

Switch, just buy an 8-port one......

I was dizzy to see it, I always thought that the domestic PPPOE was provided by ** operators and used with DSL. If you can dial like you say with a hub, just use the router as a hub, and each one will be 512k. However, it should be noted that the WAN port of the router cannot be used, and the DHCP function of the router must be turned off, and then the crossover line may be used when the router is connected to the hub, but I am not sure.

Why is it slow?

If you play a game, no problem, right?

Why bother?

It's very simple, just set up the router to be bridged without dialing, that is, use the router as a hub.

I'm also a rookie, but I don't understand why the effect of connecting to the router is not as good as connecting the hub, you know, the router has its own switch function, it should be much stronger than the hub, and now the hub has been eliminated.

It is said that the upstairs and the landlord's statements are all virtual The value you see is not real, 512k bandwidth is limited on the telecom side Everyone consciously clicks Don't keep putting things down 512k is too slow 64k**Limit speed.

It's useless to connect, the more computers, the slower the Internet speed...

The network cable that is connected to the network is not connected to the WAN port of the router, but to the ordinary port, and the ordinary port of the hub is connected to the ordinary port of the router, so that all four computers can dial up, and the network speed is 512k

As long as the router is set up to bridge without dialing, that is, the router is used as a hub. Or ask the teacher!

If you have money, buy a high-end switch... Fast guaranteed.

I don't think the one you're talking about is okay! Otherwise, telecom would have closed early! Hehe!

The bandwidth that Telecom gives you is certain! Besides, the hub doesn't have the ability to share bandwidth as you say! I really haven't tried the hub you said, connect three computers and dial one account at the same time!

The highest is 512k dizzy, and I don't have to be angry if I get on such a network speed.

See if you have a problem with the thread, including the crystal head.

This problem can also occur with computer configurations.

If you think it's okay, you can swap the ports of your computer's network cable and the other 2 fast computers.

Try to change their network cable, if it is still slow, it may be that your machine is poisoned or there is a Trojan horse, or it may be that your machine configuration is not enough, try it, I hope it can help you.

This problem still needs to be solved by the network provider.

Look for telecom and call 10000

The hub divides the bandwidth, and the speed entering the hub is determined to be 1m, which is the combined speed of two people.