How to wash white latex on the skin

Very simply, white latex is a water-based emulsion, soluble in water, and can be wiped off with a rag dipped in hot water. If it takes too long, rinse it with hot water for a while.

White latex is made of a variety of organic solvents mixed in a certain proportion, at room temperature is volatile, has a strong banana smell of liquid, toxic, mostly used for lacquer, glue dissolution. Tianna water is a liquid used to dilute paint, also known as banana water, also known as thinner. It is a flammable and explosive chemical dangerous goods, second only to gasoline in volatility.

After inhalation into the human body, it will cause certain harm to the body's hematopoietic cells. It is harmful to people. If there is a mistake, warm water should be used to induce vomiting.

Then he was immediately taken to the hospital.

Try using nail polish remover or alcohol to remove it.

You can wipe it with alcohol and try it.

To remove the all-purpose glue stain, you can use acetone or banana water to drop on the glue stain, and use a brush to brush it repeatedly, and then rinse it with water after the glue stain becomes soft and removed from the fabric. If it doesn't work once, you can brush it several times repeatedly and finally wash it. Do not use this method for fabrics containing acetate to avoid damaging the fabric of the garment.

2.Removal of White Latex Stains White latex is a synthetic resin that is polyvinyl acetate syrup. It is characterized by its ability to bond to most fibrous materials except for nylon silk, so it can be firmly adhered to clothing.

It also has the characteristic of being able to dissolve in a variety of solutions. Let's use its own characteristics to find a way to get rid of it. Available in 60 liquor or 8:

2 of the alcohol (95%) mixed with water, soak the white latex stains on the clothes, about half an hour after soaking, you can scrub with water until washed, and finally rinse with water.

1. Liquor or 95% alcohol mixed with water removal method. Soak the area where the white latex is sticky and rinse it off with water. Banana water or acetone removal method. Place banana water or acetone on the white latex and scrub until clean.

Socks imitation 2, wind oil essence removal method. The clothes are dried first, and then the wind oil essence is dripped on the clothes with white latex. Manual cotton swabs to remove latex.

You can use a toothpick or cotton swab to remove part of the latex first, and then rinse it with Dapei water. Toothpaste removal method. Apply the toothpaste to the area with white latex, wait for 5 minutes, then rinse with water.

Soak <> in water and wash and let it dry naturally. The latex absorbs a lot of water during the cleaning process, the weight of the hail edge doubles, and it should be moved slowly when cleaning the larger latex. When taking out the surface of the water, you should not only grasp one corner, otherwise it will break off due to the weight it bears.

After washing, the water should be squeezed out, and a small area of latex can be wiped directly with a wet towel. Then put it in a ventilated and cool ground to dry naturally, and it cannot be exposed to the sun or blown with a hair dryer, which will cause the latex to harden.