Boneless wipers, what is the difference between them and what three section wipers?

Boneless wiper soft wiper, the fit is better than the scratch test is a little cleaner, suitable for use in spring, summer and autumn, the boneless wiper is close to the skeleton, hanging strong, long service life, suitable for winter use, because there is more frost and snow in winter, boneless use in winter without bone, the effect is good, because the boneless soft wiper does not have a bone to scrape. The three-section wiper is a combination of bone and boneless, a more cost-effective one, combining the characteristics of boneless and bone, the fit is better than that of bone, and the life span is longer than that of boneless. These three wipers on the market common models of the original car are equipped, the general original car wiper is bone, the later wiper can be replaced with boneless or three-section wiper, the original car is three-section can be replaced with boneless or bone, but the original car is boneless to replace with bone or three-section type is not easy to change (not can not be replaced, can be replaced with a bone multi-function wiper, three-section multi-function wiper), because the original car is boneless, it is generally a special car type is a little more, the interface and size are exclusive!

Boneless wipers are composed of wiper rubber strips, boneless wiper steel sheets, wiper sheaths, plastic parts, and 4 accessories. Compared with traditional wipers, boneless wipers are very easy to assembleIt only needs to be assembled by hand, without tools such as screwdrivers.

Traditional wipers have multiple pressure points, while boneless wipers use an integrated steel sheet with more uniform stress points.

When using boneless wipers, you don't need to replace the wiper arm when replacing the wiper on your car;To replace the bone-based wiper, the bone-based wiper needs to be replaced together with the wiper arm. At the same time, when the car is driving at high speed, because the boneless wiper is designed with the principle of aerodynamics, the wiper blade will not be lifted by the air flow, ensuring that the scraping is clearer, which can not be done by the boneless wiper.

Three-section boneless wipers, as the name suggests, are divided into three sections in the structure of the wiper blades. The advantage of this three-section structure is that the wiper blades can be more closely attached to the windshield, and the effect of hanging out rainwater will be better. Therefore, in terms of use, the three-section boneless wiper is better than the ordinary boneless wiper.

Due to the three-section design of the three-section boneless wiper, it can be more closely attached to the curved car windshield, and the three-section boneless wiper has a better effect of hanging the car windshield.

Three-section boneless wipers are goodOrdinary wipers rely on the skeleton to make the wiper blade and the glass fit, due to the relationship of its structure, it is impossible to make the wiper and the glass fit perfectly, resulting in problems such as unclean scraping, easy wear and tear of the wiper blade, and high noise. Boneless wipers rely on a whole guide strip to disperse the pressure, so that the force of each part of the wiper blade is uniform, which can reduce the generation of water marks and scratches and achieve a better scraping effect.

In addition, it can greatly reduce jitter wear, coupled with the advantages of uniform force, sun protection, simple structure, lighter weight, etc., the life of the wiper motor and wiper blade is at least twice as long as that of the traditional wiper, which is more economical and reliable.

Feature 1: The three-section boneless wiper fits tightly with the curved glass, the force is uniform, and the wiper blade is coated with carbon film to ensure quieter, smoother and cleaner scraping.

2. Designed with aerodynamic principle, the wiper blade will not be lifted by the air flow when the vehicle is driving at high speed, ensuring that the scraping is clearer.

3. Optimized wiper structure design, the middle strip is flat and wide, which has the effect of sunshade and anti-aging.

4. Adopt skeleton-free floating steel plate structure to eliminate motion trembling. Long life, light weight, stronger adhesion than traditional wipers.

5. The rubber strip and covering spring sheet are made of rubber with strong ozone resistance and ultraviolet resistance to adapt to different climatic conditions.

6. Perfect integrated aerodynamic deflector design, limited wind resistance.

7. Beautiful bracketless appearance, perfect combination of function and shape.

It must be a three-stage style. The first batch of high-end German cars began to promote boneless wipers (such as: Mercedes-Benz W220 in the middle and late stages).

Since then, there have been more and more boneless wipers for European cars (special interfaces, not those ordinary U-shaped ports). After that, about 05 years or so, the Japanese car was promoted by another, the three-section wiper still remembers that at that time, the German fans of the Japanese car to promote the three-section wiper ridiculed constantly, thinking that the technology is low, but also imitation of the boneless wiper.

In fact, the three-section boneless wiper has a tight structure, which improves the loose structure of the general boneless wiper, uneven fit with the windshield, and the shortcomings of easy shaking and easy noise, so that its wiping effect, quietness and durability are greatly improved.

It depends on whether the car supports it, and there are generally boneless wipers on the market, and there are very few three-section cars.

If your car is a U-shaped hook head general, it is recommended to buy a bone-shaped wiper Bone-shaped wiper is the most stable quality wiper Three-section wiper is the hottest wiper sold last year If the rain is clean, try to look at the evaluation in the purchase Generally** is 40-50 yuan.

When car owners replace wipers in debate, they will also understand the advantages and disadvantages of different wiper products. Nowadays, there are two types of wipers on the market, one is a boneless wiper and the other is a three-section wiper. Only after having a basic understanding of them can we know which of these two types of wipers is superior.

First of all, the boneless wiper is relatively better in terms of fit, the scrape is more vigorous, and the cleaning effect is better. It is more suitable for spring, summer and autumn. The three-section wiper is a combination of boneless wiper and boneless wiper, which is more cost-effective, that is, it combines the characteristics of boneless and boneless.

The fit will be better than that of bone, and the lifespan will be longer than that of boneless.

Therefore, compared with the boneless wiper wiper, the three-stage wiper will be better, and it is more recommended for everyone to choose. It is divided into three sections, which makes the wiper fit more closely to the car glass and scrapes out the rainwater better. Of course, each wiper has its own advantages and disadvantages, and in fact we can buy it according to our needs.

Clean, no damage to the glass, etc. Because the boneless wiper is cleaner and fits tightly with the glass, it will not hurt the glass.

The boneless wiper will not produce a particularly large sound, and the hall will not appear shaky, and the fit between the glass is also particularly high, and then the force is relatively uniform, and there will be no particularly serious wear and tear.

The neatness of the glass can be guaranteed, and both wipers have different properties, which can fit the curvature of the windshield very well.

One of the most troublesome things about driving in rainy days is that the glass is not clean, which hinders our vision and seriously affects driving safety. On wiper blades, wiper blades are divided into boneless wipers and boneless wipers, so which is better between them? First of all, the bone-based wiper compresses the tight fit of the wiper blade with the glass through multiple fulcrums.

Because it is necessary to press the wiper arm hard, which will cause fatigue of the wiper motor, its advantage is that the shell is relatively hard, and the disadvantage is that the swing is very poor in use. The wiper blades with bones are pressed on the laminated glass according to multiple fulcrums on the frame, so that the working pressure of each fulcrum on the wiper blades is the average value.

The first advantage of boneless wipers is their lightness. Needless to say, the second advantage is that it is supported by a fulcrum, the so-called elastic steel plate, which is tightly connected to the side of the wiper blade and can be pressed against the glass with very little force. At work, there is not a lot of force to scratch the glass, so the glass can be completely cleaned.

Therefore, the degree of glass scraping, cleanliness and strength of boneless wipers is much better than that of boneless wipers.

At present, many family cars and urban SUVs basically use boneless wipers. Because boneless wipers are more convenient to replace and more suitable for urban use, rainwater can be quickly cleaned up. At the same time, the boneless wiper has only one stress point, which causes the wiper to work much lighter, thereby reducing the working pressure of the wiper motor.

Another reason is that boneless wipers are not so easy to break, and consumers are more willing to accept them. Secondly, since city cars or city SUVs are walking on city roads, especially at high speeds, the drag coefficient of boneless wipers is much smaller, and it will be much quieter when used at high speeds, and the sound of wipers is almost inaudible.

On the contrary, due to the large number of skeletons, it takes up a lot of space. Therefore, in the process of high-speed driving, the fluctuating wiper with the skeleton will have obvious sound, and the scraping will not be so clean when it rains heavily, because as long as there is no skeleton support, the stress will drop, and the stress will be heavier in the place with the skeleton, so the scraping will be relatively clean, and the place with high stress may make noise because of too much stress and friction with the glass.

Compared with boneless wipers, boneless wipers have the advantages of longer life, easier replacement, cleaner scraping, lighter weight, and less noise.

The fit between this kind of wiper and glass is relatively tight, so the force is uniform, it is relatively quiet in the process of wiper work, particularly smooth, very clean, and then it is particularly simple and convenient when assembling, which can achieve the effect of shading and anti-aging, and the adhesion is particularly strong.

Small size, beautiful appearance, uniform stress area, low cost, durable, simple structure, long life and other advantages.

The bone-based wipers are mostly connected by iron, with high strength and not easy to deform, and the downforce is greater when used, so the application is relatively wide, and the life is long and the cost is low. Boneless wipers are not really skeletonless, but use a molding method to shape the plastic skeleton, and some wipers with larger lengths also need to be shaped with steel cards to achieve perfect results. The difference between boneless wipers and boneless wipers:

1. The principle is different, the boneless wiper directly acts on the steel sheet, and the force concentrated at one point is well dispersed, so that the skeleton can be removed and the force of the rubber strip can be maintained evenly. The bony wiper is pressed against the glass through a number of support points on the skeleton, so that the pressure of each support point on the wiper blade is averaged. 2. The force mode is different.

Bone-based wipers, because the pressure is transmitted by the laminated strip, it will lead to uneven pressure distribution, the fit between the whole wiper and the glass is not uniform, the degree of wear is inconsistent (it will lead to some places that are not clean after a long time), and the glass and wiper blades are easy to produce noise. However, the boneless wiper is a whole rubber strip stressed, simple in structure, light in weight, so it fits more closely with the curved glass, and the steel elasticity of the boneless wiper is better than that of the general bone-based wiper, which can reduce jitter wear, and the life is longer than that of the bone-based wiper. 3. The working conditions are different.

The working conditions of boneless wipers are much higher than those of boneless wipers, which require a high-pressure wiper arm and a high-power wiper motor; However, when replacing the wipers, boneless wipers do not need to replace the wiper arms, which is simpler and more convenient than bone-based wipers.

Millions of car purchase subsidies.