How to remove the filter screen of Midea s wall mounted air conditioner

1. Before disassembling the air conditioning filter, carefully open the air conditioning shell, generally the air conditioning shell is stuck with two small card slots, and gently open the outer cover.

2. After opening the outer cover of the air conditioner, there are often two buckles inside, and it is necessary to gently open the outer cover to fully open. Then it is to take the filter, the filter is relatively easy to take, but it is stuck by a few card slots, first push the filter up, and then gently drag the filter down after the card slot.

3. After removing the filter, some air conditioners have black particles that strengthen the filtration, which should be taken off separately for cleaning and drying. Then carefully rinse the filter with clean water several times, you can scrub it with a soft brush several times, and finally dry it in a ventilated place until it is dry. Be sure not to bend the filter when cleaning, although it is elastic, but the plastic one can not withstand bending.

How to clean the air conditioner filter:

Remove the filter, take the water pipe and rinse it with tap water, don't use something like dish soap, just flush it directly. Put it in a cool place to air dry, do not expose it to the sun, the filter is generally plastic, and it cannot withstand high temperatures.

Install the cleaned filter back inside the air conditioner, and if there are dirty places inside the air conditioner, wipe them clean in advance. In this way, the air conditioner will be much cleaner and fresher when you use it again.

When cleaning, you must not use anything like a brush, which will make the filter eye of the filter larger, which is a damage to the filter and affects the use of the air conditioner.

Air conditioner filter installation method:

Compared with disassembly, it is troublesome to install the filter screen, it takes a lot of effort, during installation, to plug the filter screen along the card slot, be sure to look at the front and back, there is a protrusion in the back.

Once you've put the filter in completely, make sure that the inside side gets stuck in the slot and doesn't fall off. Then press the filter without arching, and finally clamp the protruding buckle in the card slot.

First of all, pull out the plug, open the panel of the indoor unit, there are two recesses on both sides of the indoor unit, and force it out at the recess to open it, and then lift the panel of the indoor unit upwards to a certain angle (about 60°), you can fix it in this position, and then take out the filter screen, be careful when taking the filter screen, and do not force it to disassemble and wash it vigorously in the order of disassembly, which will cause damage to the air conditioner.

Then rinse with water, remember not to use a brush, put it in a cool place to dry, and put it on when it is completely dry!

You can flip through the manual to guide the operation!

The vertical Midea air conditioner needs to be dismantled and washed by dismantling the filter, and the method is as follows:

Equipment branches: Midea vertical air conditioner.

Equipment: Midea air conditioning.

1. First of all, break it outward along the grooves on both sides, and the outer panel of the cylindrical air conditioner is shown in the figure below

2. Then you can see the filter inside the air conditioner, as shown in the figure below

3. Then push the filter screen upwards from the lower card slot of the air conditioner, as shown in the figure below

4. Then pull out the filter screen of the air conditioner from the upper card slot of the air conditioner, as shown in the figure below

5. Finally, the filter of the air conditioner was successfully taken out, as shown in the figure below

Tool Material: Midea hanging air conditioner.

1. First of all, along the Midea hanging air conditioner, break the buckles on both sides outward, and remove the air conditioning shell of the Midea hanging air conditioner.

2. Secondly, the filter of the Midea hanging air conditioner is pushed upwards from the fixed lower card slot of the Midea hanging air conditioner.

3. Furthermore, pull out the filter of the Midea hanging air conditioner from the fixed card slot of the Midea hanging air conditioner.

4. In the end, the filter of Midea's hanging air conditioner was successfully taken down.

Both hands are on both sides of the panel cover, and at the same time outward, you need to use some force; Then it opens, and after turning it up, it will get stuck by itself, and then you can see the filter, and you can pull it out by pulling the bottom of the filter up, and then take it out.

There is a plastic buckle on both sides of the panel of the indoor unit of the wall-mounted air conditioner, and the lower position of both sides of the air conditioning panel is fastened with both hands, and at the same time, the air conditioning panel is pulled hard to open the air conditioning panel, and the filter screen can be seen inside.

Hold the left and right filters respectively and draw them diagonally upward, and you can pull out the filters.

In the process of pulling out the filter, pay attention not to touch the return air temperature sensor of the air conditioner, and do not directly touch the heat exchanger of the air conditioner to avoid scratching your hands.

If you want to clean the filter, be sure to dry it before putting it back on.

When snapping back into the air conditioner panel, you should not use too much force to prevent the buckle from being damaged.

Summary. Hello dear <>

Midea air conditioner vertical dismantle the filter in this way, 1. Disconnect the power supply of the air conditioner. 2. Find the grooves on both sides of the vertical air conditioner shell. 3. Buckle the groove with your hand, gently break the net, and open the shell of the air conditioner. 4. Remove the fixed brackets on both sides of the filter screen and remove the filter screen.

How to remove the filter of the Midea air conditioner vertical.

Hello dear <>

Midea air conditioner vertical dismantle the filter in this way, 1. Disconnect the power supply of the air conditioner. 2. Find the grooves on both sides of the vertical or silver air conditioner shell. 3. Buckle the groove with your hand, gently break the net, and open the shell of the air conditioner. 4. Remove the fixed shirt and banquet brackets on both sides of the filter screen and remove the filter screen.

Here's how: 1First cut off the power supply, then remove the front panel of the air conditioner, and directly open it upwards, so that you will see two filters; 2.

Take out the filter, clean the filter with water or vacuum cleaner, the water temperature should not exceed 40 degrees, clean with a hot damp cloth or neutral spine washing detergent, do not use things like dish soap, and then wipe it with a dry cloth, or put it in a cool place for air drying, do not expose the cherry blossoms to the sun, it should be that the filter is generally plastic, and it can not withstand the high temperature of the sun; 3.Rinse with clean water, do not wash the filter with insecticides or other chemical detergents. 4.

If there is dust or dirt in the air conditioner, wipe it clean in advance, so that the air conditioner will be refreshing and healthy. Precautions: When cleaning, you must not use a brush or anything like that, which will make the filter eye of the filter larger, which is a damage to the filter screen and also affects the use of the air conditioner.

I wish you a happy life! Hope mine is helpful to you ha.

Pro: To remove the air conditioner filter, you need to follow these steps:1First, turn off the power of the air conditioner, turn it on and unplug it to ensure safety.

2.Find the location of the filter. For Midea hang-up air conditioners, the filter is generally located on the front or upper part of the indoor unit, and you may need to open the cover of the fuselage to see the position of the filter.

3.Find the fixture of the filter, usually a few bucks or screws, and remember the position and number of each clip and screw before dismantling. 4.

Use a tool to unscrew all set screws and set them aside for later use. In the case of snap-on fixing, you need to gently pull open each clip by hand and remove the filter from its fixed position. 5.

Soak the filter in clean water, you can add a small amount of detergent, and gently scrub to remove dirt. 6.After rinsing, let it dry or dry with a clean towel to make sure the filter is completely dry before installing it back in place.

7.Place the filter back in its fixed position and assemble it in reverse order from the previous disassembly, making sure that each fixing point is fastened or tightened. 8.

Finally, plug the power supply back in and turn on the air conditioner, checking that the filter is installed correctly and that it has no effect on the air conditioner. Hopefully, the above steps will be helpful to you! Please pay attention to safety when operating.

Equipment: Midea air conditioning.

1. First of all, break it outward along the grooves on both sides, and the outer panel of the cylindrical air conditioner is shown in the figure below

2. Then you can see the filter inside the air conditioner, as shown in the figure below

3. Then push the filter screen upwards from the lower card slot of the air conditioner, as shown in the figure below

4. Then pull out the filter screen of the air conditioner from the upper card slot of the air conditioner, as shown in the figure below

5. Finally, the filter of the air conditioner was successfully taken out, as shown in the figure below

It can be said that there are many styles of Midea vertical air conditioners, and the way to remove the filter will be different depending on the style. Generally, it depends on where the air inlet of the air conditioner is located, and the filter is generally in the air inlet. If the air inlet of the Midea vertical air conditioner is below, then its filter screen is here, observe whether there are screws on the baffle, some styles of air conditioners have screws, some do not, if there are no screws, just pick open the baffle by hand, and then hold both sides of the baffle and break it up, you can see the filter, and you can directly pull out the filter.

If there are screws, remove the screws and then pick open the bezel. And if the air inlet of the Midea vertical air conditioner at home is on the side, then the filter is on the side. It should be noted here that there are two filters on the side, both on the left and right, as long as you press open the movable door on the side and pull out the filters on both sides.

If you really don't know how to operate, here is a reminder to friends who are ready to buy air conditioners, you can buy air conditioners, let the salesperson demonstrate the removal method of the filter, or when the master helps install it at home, ask the installation master, this is a very simple operation, look at it and go back.