How to disassemble and assemble the Midea air conditioner shell? How to disassemble the shell of the

Different models have different shells, but they are similar, and there are generally concave and convex places at the outer corners of the two sides, which are buckled with your fingers and lifted up.

Air conditioner is the abbreviation of air conditioner, which is a device that processes the temperature, humidity, purity and airflow speed of the air to meet the needs of people's production and life.

Hanging air conditioner is one of the types of air conditioner, which is used to provide a unit to deal with air temperature changes in a space area that saves space (usually closed).

Its function is to adjust the parameters such as temperature, humidity, cleanliness and air flow rate of the air in the room (or enclosed space or area) to meet the requirements of human comfort or process, but the size of the air conditioner should be selected according to the size of the space.

The working process of an interdental volume pair specified in an air conditioning compressor. The gas on the side of the cathode and anode screw is compressed, and this side is called the high-pressure area; Instead, the screws are turned to the side that is detached from each other, and the interdental volume expands and is in the suction phase, which is called the low-pressure zone.

These two areas are separated by the contact line between the tooth surfaces of the female screw and the male screw. It can be approximated that the plane where the axis of the two screws is located is the demarcation plane of the high and low pressure zone.

Compressing refrigerants, such as freon, becomes liquid. It is then refrigerated by endothermic when the liquid state becomes gaseous at atmospheric pressure.

How to disassemble the air conditioner shell of Midea, professionals will teach you.

The operation method of disassembling the shell of Midea air conditioner is as follows:Equipment: Midea air conditioning.

1. Before disassembling and washing the air conditioner filter, the power supply should be disconnected to ensure safety.

2. Turn on the air conditioner panel switch, one on each side of the air conditioner.

3. Buckle outward at the same time.

4. Buckle the panel to see the filter.

5. Lift up the filter screen buckle.

6. Then you can remove the filter with one pull.

To remove the air conditioner shell, you need to first carry out the refrigerant in the air conditioner, use a wrench to open the connection lock of the air conditioner, take out the control line and remove the lower grid of the air conditioner, and keep all the air conditioning accessories. Then open the air conditioner lock nut, replace the base of the air conditioner external unit and remove the screws that fix the air conditioner, and the removal of the air conditioner shell can be completed. The following is a compilation of relevant content sharing, interested partners don't miss it, hurry up and take a look!

The method of disassembling the casing of the air conditioner is as follows:

Equipment: Midea air conditioning.

The first step is to lay the air conditioner flat on the table, as shown in the figure below

The second step is to open the front panel of the air conditioner, as shown in the figure below

The third step is to pull out the panel from one side to remove it, as shown in the figure below

The fourth step is to pull the frame outward from one side to remove the outer frame, as shown in the following figure

The fifth step, shake and remove the air inlet to complete the removal of the outer cover, as shown in the figure below

Step 6: Complete the diagram, as shown in the following figure:

Are you still bothered by this? I want to take it apart and explore it, but I can't open it! If you want to remove it and wash it, it's really hard to dismantle! Today I will teach you how to quickly disassemble and wash the Midea Comfort Star series shell.

Generally, there are fixing screws on the lower edge of the air outlet, but the screws are covered with a plastic cap of the same color as the shell, so you can't see it if you don't look carefully, so you need to look carefully. Remove the screws, usually two or three, pull the lower part of the shell outward, and wait for the lower part to be completely higher than the air outlet of the bottom shell of the indoor unit, and then lift it up, which is the clamp of the upper part of the shell of the indoor unit will also be disengaged, and the front shell can be taken down.

There are also air conditioners, the fixing screws are inside the front cover of the indoor unit, open the front cover, take out the filter, you can see the fixing screws, and the rest of the steps are the same as before.

You want to disassemble the internal or external machine, whether it is the internal or external machine, you will loosen the screws when you see them, and you will knock them when they are loose, so as to ensure that they can be removed.

1. The air conditioner cover has three buckle points, one on the left and one in the middle.

2. Grab both sides of the lid and lift it with a little force (don't use too much force), or break it with your fingers from left to right along the seam of the cover.

3. There is a hurdle on the left and right sides of the hang-up, just pull it up! The floor-standing type is also on the left and right, pay attention to the plastic cover, and there are screws inside! Just take it apart.

4. Open the shell of the air conditioner by pressing down on the recessed parts on both sides of the air conditioner with your hands. Remove the dust filter and clean it with tap water, if there is a lot of dirt, you can also spray the filter with air conditioner foam cleaner and dry it with a soft cloth.

Is it to disassemble the external machine or the internal machine, the external machine or ask someone to dismantle it, it is not safe, it is basically to loosen the screws.

It's easy to dismantle, but it's hard to restore.

Hang up and open the indoor unit panel operation.

If you still have questions, you are welcome to ask questions to the company in the United States; I wish you a smooth work and a happy life!

Vertical air conditioners are divided into two common types: cylindrical and square.

To remove the front side of the cylindrical shell, you need to open the top screw first, and there are two hidden screws inside, remove it. Then punch in the air conditioner, expose the style grille, and cut off the power. There are four screws (mostly black) on the outlet grille, and when removed, the front housing is removed by holding it up.

Don't move too much, because there is a power cord attached, find it, and unplug the plug-ins one by one.

Square, first open the lower return air outlet, at the connection of the upper and lower shells, there are two screws, remove. There are generally eight screw slots at the top, remove them one by one, take off the top cover, and hold up the front shell. Pay attention not to be too big, the connection line below has a display screen, which is connected to the shell.

Some don't need to remove the top cover, but it doesn't affect if you remove it, which is more convenient. ）

Midea aerial fiber trap cabinet shell opening steps:

1. On the side of the panel, there is a small opening, which is the place where the pen finger is, touch the side of the pen tip.

2. Use a screwdriver, or other small tools, gently pry open, to gently pull open both ends, pay attention to both sides.

3. Slowly open the two sides of the hand support panel upwards, paying attention to the force scale.

4. Then gently remove the whole shell by hand.

5. Open the diagram successfully.

Supplementary description: cabinet machine: the handle on both sides of the lower panel is pulled out, which can be opened 20 cm, there is a traction rope, the screw is removed, the upper lift can be removed, a filter screen, pumped upward, and the water can be washed vertically.

Pay attention to the last step when installing it back: buckle the lower panel of the cabinet machine - lift, you can completely return to the position, hang up: there is a place to pick up on the left and right sides, and you can open it by breaking it up, and there are 2 filters inside.

It can be pulled out downward, the panel can be taken down upwards, the 3 screws of the air outlet and the 2 screws of the display panel can be removed, and the face frame can be taken down upwards.

Now every household will install a variety of different specifications of air conditioning, then after a long time of air conditioning, it is necessary to remove the shell and filter of the air conditioner for cleaning, if not cleaned in time, it is likely to affect the effect of heating and cooling in the later stage, today I will tell you how to remove the shell of the air conditioner of the United States, I hope it can help you.

1. How to remove the shell of Midea air conditioner.

1. This kind of air conditioner is basically a wall-mounted air conditioner, and if you want to remove its shell, you must know its shell parts and overall structure.

2. The shell is composed of a panel, a face frame, a face frame cover and a panel cover, we take the panel down first, this time we don't need to use any tools, as long as our hands can solve it, we use our hands to pull the buckles on both sides, and slowly lift it up to remove it.

3. Then you will see that there is a filter inside, if you want to remove the filter and clean it, we grab the handle of the filter, lift it up and pull it out, and the filter will be removed by us, and it is very easy to clean the filter and the shell of the air conditioner.

4. The method is very simple, you can try it at home, don't use too much force, to prevent damage to the shell of the air conditioner, the shell of the air conditioner is made of plastic, so don't be too heavy.

2. What are the precautions for using air conditioners?

1. When we use the air conditioner, try not to turn the air conditioner on and off frequently, which will not only reduce the use of the air conditioner but also lead to power consumption.

2. When using the air conditioner, try to close the doors and windows as much as possible, which can also save a lap of electricity for the air conditioner.

The above is a summary of the relevant content and information about how to remove the shell of Midea air conditioner, I hope it can help you. If you have any other questions, you can leave a message at the bottom of the platform, and finally if you have any questions about home furnishing and home improvement, you can pay more attention to Qeeka Home.

To remove the Midea air conditioner enclosure, the following steps are required:

Turn off the power on the air conditioner:Before disassembling the enclosure, the power to the air conditioner must be turned off. This can prevent accidental electric shock and damage to the air conditioner.

Uncover the panel:On the front of the air conditioner, find the set screws of the panel, gently remove the screws, and uncover the panel.

Dismantling the drain pipe:Locate the drain pipe of the air conditioner and gently remove the drain pipe from the indoor unit.

Remove the housing screws:On the back of the air conditioner, find the screws of the case, gently remove the screws, and remove the case.

Cleaning the Enclosure:Before disassembling the case, use a damp cloth to gently wipe the case to remove dust and dirt.

Mounting Panel:Reinstall the panel onto the air conditioner and secure the screws.

Installing the drain:Reinstall the drain into the indoor unit and make sure the drain drains smoothly.

Plug it back on:Once the installation is complete, turn the air conditioner back on, check if the air conditioner is working properly, and check if the enclosure is damaged.

Please note that before disassembling the enclosure, you must ensure that the aircon is cleaned to prevent dust and dirt from entering the aircon inside the aircon. At the same time, care must be taken when removing and reinstalling the enclosure to avoid damaging the air conditioner. If you are unsure how to remove the case, it is advisable to seek the help of a professional.

The steps to remove Midea's aircon casing are as follows:

First, turn off the power of the air conditioner to ensure safety.

Locate the screws on the aircon enclosure, usually on the back or side of the aircon. Use a screwdriver to loosen the screws.

Remove the pants such as the top and bottom of the air conditioner shell. Some aircon enclosures need to be removed from the top first, and some need to be removed from the bottom first. It depends on your air conditioner model.

Remove the sides of the aircon enclosure. Some aircon enclosures require the removal of two sides, and some only need to remove one side. Again, depending on your aircon model.

Remove the air conditioner enclosure from the air conditioner body. Some aircon enclosures need to be pushed up, and some need to be pulled down. It depends on your air conditioner model.

Once you have removed the aircon case, you can clean the inside of your aircon or perform other maintenance work.

It is important to note that removing the aircon enclosure requires a certain amount of skill and experience, so if you are unsure whether you are doing it correctly, it is recommended to seek professional help.

1. Step 1 of removing the indoor unit of the air conditioner, in the lower part of the indoor unit of the air conditioner (that is, the place where the air outlet is located against the wall), about a quarter of the place between the left and right side lines, there is a hook hidden inside to connect the hanging plate of the internal unit and the indoor unit together. 2. Then, in these two positions, use a "figure 7" metal hook to gently "hook" the plastic shell at the bottom of the indoor unit downward (the amplitude is about centimeter or so), and then separate the bottom of the indoor unit from the wall with the other hand. Separate the two "hooks".

3. Then the two hands respectively "support" the left and right sides of the indoor unit of the air conditioner, "do weightlifting" state, and then gently lift the indoor pin and burial machine upward, the amplitude is about 2-3 cm. Then detach the indoor unit from the wall to Hu Fan. 2. How to clean the indoor unit of the air conditioner 1, cut off the power supply 2, open the cover plate of the indoor unit, gently take out the filter screen, rinse the filter screen with water in the water container first, and then brush it lightly with a soft brush; If there is oil on the surface or there is a strong attachment, it can be brushed with a neutral detergent, then washed with water, and taken out to dry.

When cleaning the filter, you should pay attention to not using hot water above 40 degrees Celsius. Do not wash with laundry detergent, gasoline, banana water, etc., to avoid deformation of the filter. In addition, after rinsing with clean water, wipe dry with a soft cloth or blow dry in a cool place, and never expose to the sun or dry in an open flame such as a stove to avoid deformation of the filter.

3. Observe whether the air outlet is seriously polluted, if it is serious, remove the leaf of the air outlet and soak it with a neutral agent for 4-5 minutes, gently wipe it with a rag and then brush it with a brush dipped in the cleaning agent of the inner machine to brush it back and forth. 4. Wipe all parts of the air conditioner with a wet rag, if the fins are free of dirt and firm adhesion, they can be cleaned with a special vacuum cleaner; When the fins have heavy dirt, oxides, and strong attachments, first spray and infiltrate with an appropriate amount of external cleaning agent, scrape off the foam and dirt with a special scraper after foaming, hang the special water trough under the air conditioner, and then use the water gun of a professional cleaning machine to adjust to the water mist, rinse with water until there is no residue, and wipe dry. 5. Spray the air conditioner maintenance agent on the internal fins, air inlet, outlet and shell, and then gently wipe with an orange wet towel.

6. Install the dried filter back in place, spray the hail nutrient in the air conditioner pants bucket on it, and cover the cover. Then wipe the surface with a white towel.