Coolyer C520 does not recover formatted and other options after entering recovery mode!!!!!!!!!!!

1. Use EasyRecovery Pro and select Data Recovery --- Advanced Recovery (select Advanced Option to customize the data recovery function);

2. Select the drive letter that has been changed to RAW format, and click Advanced Options in the lower corner;

3. In the file system scan, select "ntfs" for the file system", click Advanced Scan, select "Advanced Options" in the lower right corner, and set the cluster size and data start position to 0;

4. Click on the partition settings and use the MFT method (this must not be wrong); Then determined;

5. Click Next to start scanning the file system, and then wait for a long time, be patient. After completion, you will find that an NTFS drive letter has been found, and then click on the found drive letter to start scanning;

6. After the scan is completed, you will find that all the files have been found, then click Recover, and select an available disk to store your recovered files;

7. Finally, format the disk with the problem, copy the recovered files back, OK, everything is in good condition.

Right-click on the RAW format drive letter, select Attributes, then select Security, delete the useless user, add your own username, and then change the permissions, you want to change them to administrator permissions. If you don't have a security option, you can go to the folder options (open My Computer, select the Tools menu, and then select the folder options), remove the check box before "Use Simple File Sharing", and then right-click on the RAW format disk to display the security option in the properties menu. Then you just need to format it, you must pay attention to choose fast format, the file system is the same as before the problem, it used to be fat fat32 ntfs, and it corresponds to it when it is quickly formatted, if the data is really important, just use finaldata to restore it back after formatting.

EasyRecovery Pro Chinese version。

It is advisable for the landlord to see if the answer here can solve your problem.

There is dedicated software, just follow the prompts to do it.

What are you? Hard disks, SD cards.

It doesn't matter what type of formatting it is, the important thing is that the recovery is a bit troublesome and it is easy to lose data.

Recovery is not good all at once, and the recovery software needs to be scanned slowly.

Formatted to be able to recover with good software!

Don't think about it, it's basically hopeless.

If data is too important, find a company that specializes in fixing data.

There is only a big city, and the cost is high, and the success rate is high. So so.

If you have a very large hard drive, there is still a little chance that I have used it with Easy Data Recovery Wizard.

No, unless you have backed up your computer.

It shouldn't work, you've installed it a few times, and it's still possible if you only do it once.

Blue screen Most of the memory is not working.

If the file you want is in the system disk (C drive), it will be gone.

Other disks are still promising.

You don't have to look for it, you can't recover it.

If you have a write action to the disk after formatting.。。 The data is basically not available.

Press and hold the R key to turn on the computer and it will enter Recovery Mode.

There's Advance in it, then select Format Flash1 and Reset at the bottom of the menu

settings, wait a few moments for flash1 to be formatted.

You need to shut down before formatting F1.。。。

You change to a different computer to repartition this hard drive, format it, and try it! Because its encryption technology is integrated into the CPU!

So, if you have any important data on your hard drive, go to a data recovery company.

Otherwise, it's low, it's fine, and PC3000 is also very easy to use.

Antiy Data Recovery However, it is generally not possible to fully recover all of them....Only some or most of it can be recovered....

I rub ... All formatted ==

If you don't have a backup, you can't do it ==

Mobile phone: The factory reset of the mobile phone has nothing to do with the memory card, but the everything in the mobile phone is gone.

Factory settings just restore the things set by the phone, it won't format the SD card, it doesn't matter.

If you want to repair the USB disk, you can use the mass production tool of the corresponding chip model to initialize it, but the data inside will be lost. It is very difficult to repair the data in the USB flash drive, and the data may disappear permanently. If you want to recover data, it is recommended to go to a professional organization.

For example, Rising and Jiangmin both have corresponding data recovery centers.

Most of the time --- formatted and later recovered with recovery software!