The easiest and most accurate way to dump in an underground garage

1. Because the underground parking lot is underground, the light must be bad, so the front light must be turned on before entering the underground parking lot;

2. According to the law, the speed of entering and exiting the underground parking lot should be controlled below 20km h to avoid starving and dissipating the speed of the car when going downhill;

3. There are many corners and obstacles in the underground parking lot, and there are often children running around in the underground parking lot of some shopping malls, so it is necessary to use turn signals;

4. Parking in the underground parking lot must first pull the handbrake and then hang the P gear, because the P gear will still have the margin to move back and forth, which may lead to a collision.

Take the parking and entry method, the specific operation is to put the rear wheels in place, and then slowly straighten the front wheels, because many cars are front-wheel-drive, so the front wheels will move for a longer time when turning, and the rear wheels are parallel to the body at any time, so it will be simpler to take this way.

This method should take advantage of the width of the aisle, and at the beginning let your car have a certain degree of inclination, so that when entering the parking space, the intersection angle between the car and the parking space can be reduced, so as to reduce the amplitude of the direction when reversing, and in this way, the driver also has more vision to observe the surrounding situation.

Learn this method to make it easier for you to reverse into storage.

1. The "swing incline reversing method" allows the owner to carefully observe the danger points on both sides of the rear banquet through the rearview mirror to avoid unnecessary friction. When reversing in this way, Chi Xiangsou swings the position of the car as much as possible, and then observes the rear through the left rearview mirror, and when the vehicle enters the rearview mirror on the side of the car, it starts to reverse. When the left rear wheel completely crosses the front of the vehicle on the left, start to look in the right rearview mirror, slow down, and carefully look at the distance between the rear and the vehicle on the right.

2. The "code calendar fixed-point reversing method" often appears in non-zigzag parking spaces. A little trick to use this reversing method is to keep the lateral distance between your car and the parking space to about a meter to ensure that there is enough space.

Before starting to reverse, in addition to the lateral distance between meters, it is necessary to keep the driver's position on the same level of the second parking space outside the parking space. The forward is not in place, but it is easy to scratch the rear of the car. After that, he started reversing into the garage and knocked the steering wheel to the left.

Pay attention to slow down as there are already blind spots at this point.

The method of reversing into the warehouse in reality:

1. You need to park the car next to the parking line, then aim the left rearview mirror at the left line of the parking space, and then fill the steering wheel to the right.

2. Wait until there is a certain angle between the longitudinal body and the parking space, and the size of the angle is placed in the rearview mirror on the left to see the front of the vehicle next to it, so you need to quickly stop the vehicle, and then return to the wheels and slowly start reversing.

3. It is necessary to adjust the left and right body bodies, especially to ensure the suitable distance from the left and right vehicles, if there is a wide side and a narrow side, then you need to hit the steering wheel on the wide side, so as to ensure that the vehicle and the parking space are on a line.

4. In addition, if in reality, you enter the parking space against the direction of the parking space, the better way is to turn the vehicle around, if there are more vehicles around it, and you can't reverse, then you can use the way of reversing directly into the warehouse. Although this method is more difficult, it is similar to the usual reversing and storage, but the speed of the vehicle needs to be slower when operating, and the operation is not too nervous, and the mentality needs to be stable.