Huawei phones can be connected to AirPods

AirPodsPro to connect to an Android phone, users need to turn on the Bluetooth button on the back of AirPodsPro, and then connect through the Bluetooth search function of the Android phone. The steps are as follows.

1. Open the lid of the earbuds charging case, press and hold the round button on the back for three seconds, and turn on the "Bluetooth mode". This is shown in the figure below.

2. The indicator light in the middle of the charging case will show white light flashing, turn on Bluetooth on your Android phone. This is shown in the figure below.

Notes:

The button on the back of the AirPods Pro power box, the user must press it on three sides and see the white light flash, which is turned on normally for Bluetooth.

AirPods can be paired and used normally on Huawei phones. You only need to turn on Huawei's Bluetooth settings to pair like Bluetooth headphones. However, there are two functions that cannot be achieved on Android, the first is that the earbuds cannot be removed and automatically paused**, and the second is that the operation settings corresponding to the airpods cannot be customized.

Here's a closer look:

1. Open the lid of the charging case and press and hold the small button on the back of the charging case until the indicator turns white and flashes. Go to the settings of your Huawei phone, turn on Bluetooth to search for pairing, find the AirPods and then pair them to use;

2. However, there are two functions that are not available on Android phones, the first one is that after removing a headset, it will not pause**. The second is that you can't customize the operation settings corresponding to double-click AirPods, but you can borrow iPhones and iPads with iOS11 installed to set the parameters and then connect them to Huawei phones.

AirPods can be paired and used normally on Huawei phones. You only need to turn on Huawei's Bluetooth settings to pair like Bluetooth headphones. However, there are two functions that cannot be achieved on Android, the first is that the earbuds cannot be removed and automatically paused**, and the second is that the operation settings corresponding to the airpods cannot be customized.

Here's a closer look:

1. Open the lid of the charging case and press and hold the small button on the back of the charging case until the indicator turns white and flashes. Go to the settings of your Huawei phone, turn on Bluetooth to search for pairing, find the AirPods and then pair them to use;

2. However, there are two functions that are not available on Android phones, the first one is that after removing a headset, it will not pause**. The second is that you can't customize the operation settings corresponding to double-click AirPods, but you can borrow iPhones and iPads with iOS11 installed to set the parameters and then connect them to Huawei phones.

There is a button on the back of the AirPods charging case to activate pairing, and then we first open the upper cover of the AirPods charging case, and then press the pairing button on the back for about three seconds to enter Bluetooth pairing mode.

We turn on the computer and tap to open the taskbar at the bottom of the screen.

If you can't find the Bluetooth icon at the bottom of the computer screen, you can also find Bluetooth from the system's Devices, and then tap Add New Earphone.

Then the Bluetooth signal of the AirPods earbuds that have entered pairing mode will be detected in the Bluetooth list of the computer, and then tap to pair, after clicking to pair, we will wait a while, the computer will be paired with the AirPods earbuds successfully, and the computer will be displayed as "connected".

AirPods Tips.

Double-tap AirPod: Used to set the feedback function of AirPod after tapping the side of the two-button reed, such as waking Siri, ** Pause, Previous and Next, the two AirPods can be set up separately with different function feedback tapes.

When AirPods are worn in your ears, the connected device audio will automatically go to your AirPods**, and when you take an AirPod out of your ears while wearing AirPods and listening to songs on your iOS device, it will pause**, put it back in your ear, and **will resume**; When you take out both AirPods at the same time, it stops, but it doesn't resume when you put it back.

First, click on the infogram in the bottom right corner of your computer's desktop. 2. Then click the Bluetooth icon above the box where the bounce comes out to open it, then place the mouse pointer on the cherry blossom skin, right-click, and then click Chaxiao to go to "Settings". 3. Then find your Bluetooth device in the pop-up dialog box, and then click to connect.

The connection method between AirPods and Wild Skin Huawei Computer is not Xun: turn on the Bluetooth switch between AirPods and Huawei computer, dry ridge and then pair according to the computer prompts, and the connection will be established after the pairing is completed.

1.Unlock your phone and turn on Bluetooth.

Unlock your Huawei phone and turn on Bluetooth.

3.Connect to the Calendar AirPods

Click to connect with the airpods to connect with the macro block.

Take the Windows computer as an example, first click on the information pattern in the lower right corner on the desktop of the first computer, and then click the Bluetooth icon above in the box where the source comes out, and place the mouse pointer here after opening, and then right-click the mouse Yuchang, go to the settings, find your Bluetooth device, and the connection is the cardinal number.

First of all, you need to press and hold the button of the airpods, click on the settings on the computer, click on the bluetooth, find the name of the airport, click on the mountain collapse and shout to the teaser after the pairing is completed, it will be automatically connected.

If you want to connect with the power bank, at this time, you need a built-in permission to allow operation of the internal disadvantage of the mobile phone, or the stupid burning family is saying that the mobile phone segment can be searched wide, which is more difficult.

It may be caused by an unstable connection, you can restart the phone, and then redo the matching. Another is that the headphones and mobile phones should not be too far away.

AirPodsPro is connected to Huawei mobile phones, and Luslip requires users to turn on the Bluetooth button on the back of AirPodsPro, and then connect through the Bluetooth search function of Android phones. The steps are as follows.

1. Open the lid of the earbuds charging case, press and hold the round button on the back for three seconds, and turn on the "Bluetooth mode". This is shown in the figure below.

2. The indicator light in the middle of the charging case will show white light flashing, turn on Bluetooth on your Android phone. This is shown in the figure below.

3. After the Android phone turns on Bluetooth, it will automatically turn on the function of searching for early argument as shown in the figure below.

Note: The button on the back of the AirPods Pro power box, the user must press the button on three sides and see the white light flash, and then turn on Bluetooth normally.

After October 6, 2021, the AirPods that have been connected to Apple devices will be like this. I can't make phone calls, I can't hold Zoom meetings, etc., so I can only listen to songs after testing. It's not hard.

My three Zen Li Shi airpods have recently connected to the scrambler over Apple devices = =

Huawei's official engineer's reply is that because Apple released an update, engineers are still working on a fix... so。。Just wait.

Search for Mano Suo or find the app "My Huawei"--Quick Service--Upgrade Trial,Update your phone to the latest,You can support Apple headphones,Today is muffled shoutingOctober 30, 2021,Press this upgrade Huawei Hongmeng beta,You can support it。 It is indeed because Apple updated the firmware version that Yan Qinghua does not support the phone.

Awesome guys! I tried various recommended methods such as station b today, Zhihu, etc., including reconnection, developer options, but it didn't work. In the end, it was solved by restarting the Xunze mobile phone and then changing the Changkuan connection!! This. The laughter was bright with tears.

The solution to the problem that the Windows computer can't find the AirPods is as follows:

Computer: Manuscript pick Huawei notebook.

System: Windows 10 Professional Edition 2004.

Tool: airpods.

1. First take out the earphones, then press and hold the setting button on the back of the earphone case and stop when the indicator turns white and flashes.

2. After the key clears the system, click on the Bluetooth and other positive device settings window.

3. After opening, first turn on the Bluetooth switch, and then click Add Bluetooth or other devices.

4. In the window, tap to select "Bluetooth", then select your AirPods device, and finally tap the Connect button to pair.

5. Then use AirPods as your output device. In the Bluetooth & Other Devices settings window, select Sound settings and use the Bluetooth device as the output device in the Sound dialog box.

AirPods Pro are wireless headphones from Apple that support active noise cancellation. A new in-ear design is adopted instead of the classic look of the earpods that have been used for many years. So can AirPodsPro work with Huawei phones?

AirPodsPro earphones can be used normally with Huawei mobile phones, you only need to open Huawei's Bluetooth settings to pair like Bluetooth headphones.

AirPodsPro is connected to a Huawei mobile phone compared to connecting to an iPhone, mainly because there is less pop-up window to open the lid to see the power, the options to control noise cancellation and transparency mode on the phone, and the function of removing the unilateral earphone**will not automatically stop,Look at the power can**Third-party APP,Mode adjustment can be adjusted through the buttons on the earphone。

In this article, AirPods Pro && Huawei Mate30Pro are used as an example for the system.

The method of connecting Apple earphones to Huawei mobile phones is actually relatively simple, and the specific method steps are as follows: 1. First, open the Huawei phone, select and click "Settings" in the interface of the Huawei mobile phone; 2. In the "Settings" interface, find and click the "Device" option of the phone, select "Bluetooth", and turn on the Bluetooth switch. 3. Press and hold the button on the back of the AirPods box, and wait for the finger on the top of the box to turn yellow. 4. Finally, you can see the name of the airpods in the Bluetooth list of the Huawei phone, click the name to pair, so that the Apple earphones can be successfully connected to the Huawei phone. Generally, before using Bluetooth headsets, be sure to confirm whether the device is compatible with them, and then make sure that the phone has been turned on and not connected to the phone headset, and the Bluetooth headset has been turned off.

If the Bluetooth headset has not been paired with any device, it will enter the Chaling pairing mode if it is not turned on directly, and the indicator will start to flash rapidly. If the Bluetooth headset has been paired with other devices, you need to ensure that the Bluetooth headset has been turned off, and then press and hold the multi-function button for about 5s until the indicator starts to flash rapidly, and then select the Bluetooth that needs to be matched, then the Bluetooth headset voice prompts "pairing successful", and the phone also displays "connected".

Of course. 1.Go directly to the settings page of your Huawei phone, find the icon button, and select Enter.

2.If there is no problem at this time, go ahead and click on AirPods to jump.

3.Next, a dialog box opens, and you need to confirm the pairing.

4.In this way, once you have found the graphical result, you can implement the requirements. 1.Open the lid of the charging case of the AirPods; Press and hold the small button on the back of the charging case until the indicator light flashes white, that is, enter the pairing mode of AirPods;

2.Go to [Settings] on your Huawei phone and tap the [Blue Stupid Hands and Teeth] option;

4.Then the name of the AirPods will appear in the list. Tap to wait for pairing to complete. After the connection is successful, the Potato AirPods can be used as Bluetooth headphones.