Qashqai s CVT continuously variable speed response to the conversation

Hello dear! Very fuel-efficient! Hope it helps, please set it up! Thank you!

CVT transmission for Nissan Qashqai. The Nissan Qashqai is a compact transmission under Nissan, which is an automatic transmission with a simple structure. There are only two helical gears and a steel chain inside the gearbox.

CVT's steel chain can move on helical gears, allowing the transmission to be variable and torsional.

The wheelbase of the Nissan Qashqai is 2646 mm, and the length, width and height are 4401 mm, 1837 mm and 1593 mm, respectively.

The Nissan Qashqai is powered entirely by a liter naturally aspirated engine. This engine has a maximum power of 113 kW and a maximum torque of 204 Nm. The engine has a maximum power of 6,000 rpm and a maximum torque of 4,400 rpm.

The engine is equipped with direct injection technology and uses an aluminum alloy cylinder head and block.

The front suspension of the Nissan Qashqai uses MacPherson independent suspension, and the rear suspension uses multi-link independent suspension.

The multi-link independent suspension improves the grounding performance of the wheels, which improves the grip of the wheels.

The structure of a multi-link suspension is quite complex. This suspension turns the two forks of the double-pronged suspension into independent linkages.

MacPherson suspension is a common independent suspension with a relatively simple structure.

The MacPherson suspension has only one L-shaped control arm that takes up little space.

The Nissan Qashqai uses a CVT gearbox. The Nissan Qashqai is a compact transmission from Nissan, which is a relatively simple automatic transmission, which has only two cone wheels and a steel chain inside. The steel chain of the CVT gearbox can be moved on the cone pulley, so that the gearbox can change the speed and torsion.

The wheelbase of the Nissan Qashqai is 2646 mm, and the length, width and height are 4401 mm, 1837 mm, and 1593 mm, respectively.

All Nissan Qashqai models use a liter naturally aspirated engine, this engine has a maximum power of 113kW, a maximum torque of 204 Nm, and the maximum speed of this engine is 6000 rpm, and the maximum torque speed is 4400 rpm.

The engine is equipped with direct injection technology and uses an aluminum alloy cylinder head block.

The Nissan Qashqai uses MacPherson independent suspension for the front suspension and multi-link independent suspension for the rear suspension.

The multi-link independent suspension can improve the grip and strength of the wheels.

The structure of the multi-link suspension is more complex, and this suspension is to change the two wishbones of the double wishbone suspension into a separate linkage.

MacPherson suspension is a relatively common independent suspension, and the structure of this suspension is relatively simple.

The MacPherson suspension has only one L-shaped control arm, which takes up almost no space.

Millions of car purchase subsidies.

The use of the Qashqai variable liquid stool speeder is to place the gear in D gear to drive normally. The transmission is a mechanism used to change the speed and torque from the engine, which can fix or shift to change the transmission ratio of the output shaft and the input shaft, also known as the gearbox. The correct operation of the transmission is as follows:

1. Step on the accelerator slightly. Turn the throttle to open the throttle wider before shifting gears (gearing), and add a certain amount of oil to make the engine have enough power to ensure that the speed of the vehicle is not reduced during the shifting process;

3. Quickly grip the clutch grip. Almost at the same time as closing the throttle, hold the clutch grip with the 4 fingers of your left hand (the thumb is still on the steering handlebar) and hold it all the way to the end, disengage the clutch as soon as possible, and get ready for gear shifting;

4. Step on the shifter pedal. As soon as you hold the clutch grip with your left hand, step on the rear tread lever with the ball of your left foot or heel to shift into high gear. The power of the pedal should be just right, the action should be clean and neat, and the mud and water should not be dragged with mud and water, and it should not be stepped on continuously;

5. Relax the clutch grip evenly. After the left heel steps on the shifting rear pedal lever to call the limb, the left hand immediately releases the clutch grip and engages the disengaged clutch in time and smoothly, so that the engine power is quickly transmitted to the rear transmission, so as to prepare for increasing and burying the driving speed of the vehicle;

6. Increase the throttle. When the left hand releases the clutch grip, the right hand turns the throttle knob downward in time to the rear, so that the closed throttle opens, the opening should be moderate, not too large or too strong.

Millions of car purchase subsidies.

1. First press the vehicle brake pedal in the cockpit, otherwise the vehicle cannot be started.

2. After that, click the one-button start button under the steering wheel of the vehicle to start the vehicle engine.

3. After that, pull the vehicle handbrake brake at the armrest position to unlock the vehicle handbrake.

4. After that, dial the gear lever of the vehicle to D gear, so that the vehicle can drive normally.