How do I partition an SSD and how do I partition an SSD?

Small partitions, few partitions.

Or is it because of the SSD.

Garbage mechanism.

Completely delete the text on the SSD.

is to destroy the entire area where the invalid data is located, and the process is as follows: first put the area in the area.

Centralize the valid data, transfer it to an idle location, and then put it.

Problem area. The whole is cleared.

This mechanism means that when partitioning do not put.

The capacity of the SSD is full. For example, a piece.

128G SSD, the manufacturer will generally nominal.

120g is reserved for some space. But such as.

The fruit is divided only when it is partitioned.

Better. This reserved space is automatically used for optimization operations inside the SSD, such as wear and tear.

Balanced, garbage**, and bad block mappings. This practice is called.

Small partitions. Fewer partitions.

It's a different concept, related. 4k alignment.

Impact on SSDs.

On the one hand, it is now mainstream.

SSD capacity is not very large, and more partitions mean wasted space.

The more partitions on the other hand too many tend to lead to partition misalignment in the partition boundary of the disk area.

Performance may be impacted.

The simplest to keep. 4k alignment.

The way to do this is to use it.

Win7 comes with it.

partition tool to partition the area, so that you can ensure that the partitioned areas are.

4k aligned.

Leave enough space left.

The more SSD storage, the slower the performance. And if a partition is in excess of usage for a long time. Pass.

The likelihood of an SSD crash will increase dramatically.

So clean up useless files in a timely manner, set the appropriate virtual memory size, and put the movie sound.

It is very important to store large files on the HDD, and it is important to keep enough SSD partitions.

of the remaining space.

My 64G, is divided like this, you refer to: C disk 30G, system. The rest of the D disk,Personal document files,And history or something, I'm on the HDD,So that the C disk basically won't have any garbage,It can also protect SDD from a large number of reads and writes,Extend its life。

The D disk puts some commonly used and necessary software, and the large software is placed on the HDD.

Before installing the system, be sure to enable the disk read/write mode to AHCI. It can increase the speed a lot.

My system has been installed for more than two months, C disk 30g, half of it has not been used, and the longest half of the garbage is not clear, and the C disk is basically unchanged for half a month. D disk only used more than two G, it is recommended that after you install the system, use SSD Fresh 2014 (SSD solid state drive optimization) Chinese green version Optimization, a lot of use on HDD on SDD is a kind of damage.

Would you partition an SSD?

Recommended partition for a 512G SSD: 80G for C drive (system disk).

At present, the latest win10 system occupies about 23G space after installation, and the system partition is 60G-80G enough.

D disk (software disk) 100G, some application software and documents can be installed here.

E disk (multi-** audio-visual, game disk).

F drive (system backup, important data, etc.).

Of course, it can also be divided into only 2 areas, 100G for C disk (system disk), and all the remaining space for D disk.

Partition suggestion: If the hard disk is 512GB, it is recommended that the C disk be divided into 120-150G, and the others can be divided into D drives, and it is not recommended to divide too many partitions.

I don't agree with the so-called non-partitioning practice on the Internet, because most of the people who can ask this question are ordinary users, and they don't know how to solve problems when they encounter them.

1. Start PE first, the following picture is the interface of PE, select one to enter.

2. Click on the partition software shown in the figure below on the desktop to enter the partition interface.

3. After entering the partition software, click on the SSD on the left side of the partition software.

4. After selecting the SSD, click Quick Partition on the menu.

5. Select one for the number of partitions, such as dividing into three plates.

6. Click on the location shown in the image below to select the 40964k alignment.

7. After selecting the SSD, click OK, and the SSD will be divided into three partitions.

8. There is an active partition that can be used as a system disk.

9. Then split the HDD and click to select the HDD.

10. Right-click to delete all partitions, if you have a mechanical hard disk system, you don't need a new hard disk.

11. As shown in the figure below, click OK, and all partitions will be deleted after confirmation.

12. After deleting all partitions, click Quick Partition again.

13. Click to select the rebuilt MBR to be removed at boot, remove it according to your personal needs, and then click OK.

14. Then right-click on the active partition, select Deactivate Status, and click Yes. This does not boot the system.

15. Then click again to deactivate the partition and right-click to select the logical partition.

16. Click "Save & Change" in the upper left corner of the software, and then click "Yes". At this point, the hard disk of the computer storage device is completely used as a data disk. Unable to install the system. Unless reassignment is activated.

First of all, you need to install the SSD on the computer, and then you can go through the system of this computer - management - storage - disk management - click on the name of the disk that needs to be partitioned - right-click to convert to GPT partition, and then partition it in the hard disk location.

You can also partition through partition assistant (partassist), hard disk wizard (diskgenius) and other software, the operation method of these software is similar to the above method, generally you need to convert the hard disk into a GPT partition, and then partition it, the following figure is the partition assistant as an example.