What should I do if FAW Volkswagen Sutar shows that the body stability system is faulty and still

What happens when Volkswagen Sutar body stability control ESC doesn't ignite?

If the fault light is always on, and no other fault lights are lit, it is usually caused by the loss of signal of the components of the body stability system, and the common one is the failure of the angle sensor, lateral acceleration sensor or wheel speed sensor.

Check the line speed of the stable system first, is the ECU damaged? Look for the problem and then look at the engine problem, some faults are connected.

The battery is dead, and mine just had this problem.

What happens when Volkswagen Sutar body stability control ESC doesn't ignite?

In order to reduce the operating force of the driver's action on the steering wheel (also known as the steering wheel), the device that uses external power to generate steering auxiliary force is called a steering power assist device.

When the vehicle is driving, the steering power system fault light is on, indicating that the power steering system is faulty, and the steering power may be weakened or completely invalid, and the resistance to turning the steering wheel will be several times greater than usual, and this fault cannot be checked or repaired by itself, so the best way is for the user to drive to the nearest maintenance service station for repair.

Eighty percent of the battery is out of power.

If the battery loses power, it will not ignite, lock the gear, and lock the steering wheel.

If it is nighttime, you can turn on the lights.

Let's see if the lights will flicker.

If there is, it can basically be diagnosed.

If you don't have an emergency power supply, you can call insurance**, and the insurance generally has a free electricity service.

You can also use other cars, and it is of course better if you have an emergency power supply.

There is also a situation, some models will have an anti-theft function, if it is with a mechanical key, it may be that you twisted the steering wheel without inserting the key, and the car was automatically locked.

If it is a one-button start, the key needs to be within the induction range, otherwise it will not ignite the fire, or it may be that the key is out of power, the button can open the door, but the signal induction is weak, put the key near the center console and then try to ignite.

The reason why the steering system warning light is on is because of the power steering system fault light, which indicates that the power steering system is malfunctioning. When the yellow light is on, it means that the steering system is partially out of order and more force is needed to turn the steering wheel. When the red light is on, the steering system is completely faulty and the power supply system does not provide any assistance.

The fault may cause: large steering force, abnormal steering noise, steering wheel shaking, poor steering wheel tilt ability and other phenomena.

Hello, this mainly depends on the computer settings of the car itself, some cars for driving safety, steering system failure, driving computer will control can not get on the car. It is also possible that the steering wheel is locked, and it should be solved after unlocking the steering wheel. It is recommended to contact the local 4S shop for inspection and repair.

There are several reasons for this:

The first type: out of gas. We went out to rescue a car before, and the fuel gauge showed that it was below the red line, so naturally it could not catch fire.

The second type: the battery is out of power. It may be due to the loss of power or the expiration of the battery life due to the long-term headlights have not been turned off, and it is generally recommended to replace the battery in time after 2 years.

In addition, the installation of xenon headlights, high-power audio, etc. are also the causes of vehicle circuit failures. The situation of the vehicle without power is easy to check, just press the horn to know.

The third type: the gear is wrong. When the automatic transmission car starts, the gear must be placed on the P or N gear, if it is placed on the R or D gear, it will not ignite. There are also some manual transmission cars that will not catch fire if you don't step on the clutch.

Hello owner, this is caused by the failure of the braking system, it is recommended to go to the repair station and my repair shop to detect the fault code with a detector. Repairs are carried out according to the fault code.

The design of the appearance is very modern, the trapezoidal large-mouth mesh grille is very exaggerated, the presence of the car logo is more domineering, the LED headlights on both sides of the car are more aggressive and very sharp, the concave fog lamps on both sides are more prominent with silver chrome trim, the hood line extends to the grille, and the overall shape is very domineering than the Audi A6. 2. Interior space: In terms of internal space, Sega is very spacious, when you sit in the back row, you will find that the seat seems to use the design concept of ergonomics, and the support for the parts of the body is very good, although it can not be compared with the Nissan-Citroen C4 known as the mobile sofa, but it is relatively good in the same level of models.

Summary. Hello, I am happy to answer for you Your car master exclusive technician Concentrate on your heart and sincerely answer your car questions, find solutions and methods for you to ask questions, Suteng taxi does not respond, you need to check a few points.

First, there is no start switch signal, there is no start switch when ignition, and the signal input to the ** control unit is not responsive to the taxi.

Second, unplug the crane plug, measure whether the plug has power supply, if the plug has power supply, you need to replace the starter, if the plug does not have power supply when you take a taxi, you need to check the starting signal and control unit, the output signal is problematic.

Third, check whether the gearbox control unit has a PN file signal, the control unit will not supply power to the starter when there is no gear signal, so it will also cause the taxi to not respond, I hope mine will be helpful to you, if you have other questions, you can continue to ask questions.

What should I do if Volkswagen Suteng ignition does not respond.

Hello, don't worry, I can ask for your question, but wait a minute, I need text for about 2 minutes.

Hello, I am very happy to answer your car pure car demolition master exclusive technician Concentrate on your heart and sincerely answer your car questions, find solutions and methods for you to ask questions, Suteng taxi does not respond, you need to check a few points. First, there is no start switch signal, there is no start switch when ignition, and the signal input to the ** control unit is not responsive to the taxi. Second, unplug the crane plug, measure whether the plug has power supply, if the plug has power supply, you need to replace the starter, if the plug does not have power supply when you take a taxi, you need to check the starting signal and control unit, and the output signal is problematic.

Third, check whether the gearbox control unit has a PN gear signal, when there is no gear signal, the control unit will not supply power to the starter, so it will also cause the taxi to not respond, I hope mine will be helpful to you, if you have other questions, you can continue to ask questions.

Summary. Hello, I have seen your inquiry, please wait for a moment and answer it for you immediately.

Volkswagen Sutar does not catch fire on the dashboard. What is the cause of the failure of the display steering system?

Hello, I have seen your inquiry, please wait for a moment and answer it for you immediately.

Hello, in this case, first of all, it may be that the battery is insufficient, and you need to find a car to take the battery, and use the battery detector to check the battery, and then use the remote control to put it in the induction area.

Then you focus on checking the remote control battery, maybe the remote control battery is low.

Then start again, you still need to put the key in the sensing area to play the vehicle.

The remote control to open the door is fine.

Let's replace the remote control battery first.

It is recommended that both keys be replaced together.

In the past, I didn't need to press the remote control in my car, and I opened the door when I got on the handlebar, and today it is not good.

Oh ok thanks, I'll go change the battery tomorrow.

You're welcome um. Thanks, excuse me. Good.