75X75 angle iron 1 meter 8 long weigh

70x70 angle iron, per meter length, weight of different thicknesses are as follows:

Thickness, thickness 5mm-- thickness.

Thickness, thickness kg m.

1. Marine angle steel.

The main product description of marine angle steel: due to the harsh working environment of the ship, the performance of the marine angle steel material is required to have good toughness, high strength, good corrosion resistance, welding performance and surface properties. The chemical composition of the material is also different from that of ordinary angle iron.

Its main use is: mainly used for hull internals, etc.

2. Ball flat steel.

Ball flat steel is a kind of medium-sized steel mainly used in the field of shipbuilding and bridge building, among which marine ball flat steel is an auxiliary medium-sized steel for shipbuilding. The main product features are:

1. The appearance is bright and round, no lines and no ribs, and the surface of other steel bars has carved lines or ribs, which causes the adhesion between the flat steel and the concrete to be small, and the adhesion between other steel bars and the concrete is large.

2. The converter is used to make flat steel, mainly using molten iron as raw material, and there are fewer harmful elements in molten iron, and the quality of flat steel produced is the highest.

3. The continuous casting billet has a high sizing rate, which can ensure the sizing rate of flat steel and meet the needs of users.

3. L-shaped steel.

L-shaped steel, also known as unequal edge and unequal thickness angle steel, is a new type of profile produced to meet the needs of large-scale ship construction. In addition to being used for large ships, L-shaped steel can also be used for marine engineering structures and construction engineering structures with high requirements. Its main advantages are:

1. Under the condition that the height of the section steel is the same as the thickness of the abdomen, the cross-sectional coefficient and stiffness of the L-shaped steel are larger than that of the spherical flat steel.

2. At the same cross-sectional coefficient, the thickness of the L-shaped steel panel is slightly thinner than that of the spherical flat steel, which is conducive to improving the quality of the weld.

3. In the case of the same cross-sectional coefficient, increase the storage capacity of the ship and improve the economic benefits.

70x70 equilateral angle iron has specifications, check the table to know that the theoretical weight is:

Edge thickness of 5mm =

Edge thickness of 6mm =

Edge thickness of 7mm =

Edge thickness of 8mm =

Hope it helps.

The formula for calculating the size and weight of hot-rolled equilateral angle steel: w(kg m) = side thickness * (2 side width - side thickness), the theoretical weight of the equal angle steel edge thickness 4 of 70 70 is, the theoretical weight of the side thickness 5 is, the theoretical weight of the side thickness 6, the theoretical weight of the side thickness 7 is, the side thickness, and the theoretical weight of 8 is.

Do the math yourself.

The density of iron is tonnes per cubic meter = grams per cubic centimeter.

You measure the thickness again: 7*7*thickness (cm)*100*grams.

It depends on the thickness of the angle iron, 4mm, 5mm, 6mm, 7mm, 8mm, different. The 4mm is about there, the thickness is increased by 1mm, and the weight is about 1kg.

75 75 5 angle steel, weight per meter: kg. The formula for the theoretical weight of the angle steel per meter: w(kg m) = edge thickness (side width macro bu + side width - edge thickness base) (the formula method can only roughly calculate the weight of the angle steel, and the actual theoretical meter weight is subject to the hardware manual!) ）

75 angle steel one meter weight according to different wall thickness has kg, kg, kg, kg, kg, kg, kg, kg, see GB T 706-2016 table for details.

75 angle steel per meter weight, this specification is 75 6. Angle steel can be composed of various different stressed components according to the different needs of the structure, and can also be used as a connector between components. It is widely used in various building structures and engineering structures, such as house beams, bridges, transmission towers, lifting and transportation machinery, ships, industrial furnaces, reaction towers, container racks, cable trench supports, power piping, bus support installation, and warehouse shelves.

Angle steel is a carbon structural steel for construction, which is a section steel with a simple section, mainly used for metal components and the frame of the plant. in use.

kg

1 m = 100 cm = 1000 mm The weight of iron in the volume of 1 meter Xiaohao Town * 1 meter * 1 meter is 7800 kg.

The weight of 1 cubic centimeter iron reed is is.

If the angle iron unit is millimeters, the weight is the cross-sectional area * length: coarse (100*10+90*10) 1000* kg. kg

110 110 10 The angle iron weighs more than a meter.

Hello dear, thank you for waiting, let me explain to you, kilogram 1 meter trace age = 100 cm = 1000 mm 1 meter * 1 meter * 1 meter volume of iron weight is 7800 kg 1 cubic centimeter iron weight is angle iron unit such as posture Jane fruit is millimeters that weight is cross-section cover volume * length: (100 * 10 + 90 * 10) 1000 * kg kg, I hope you can be satisfied.

Summary. Hello, I am helping you to inquire about the relevant information and will reply to you immediately.

Hello, I am helping you to inquire about the relevant information and will reply to you immediately.

For ease of calculation, first convert to a component meter, 75 mm 0 75 dm, 8 mm 0 08 dm 1 m and 10 dm. (0 75 0 key positive 75) 0 changcha 08 10 7 85 (density) 9 42 kg.

If my answer is helpful to you, please give a thumbs up (comment in the lower left corner), look forward to your like, your efforts are very important to me, and your support is also the driving force for my progress. If you feel that I am satisfied with the answer of Fu Lu, you can click on my avatar for one-on-one consultation. Finally, I wish you good health and a good mood!