At that time, it was automatically shut down after the power ran out, and now it is charged, and it

There are many factors that the mobile phone cannot be turned on, and the battery, mobile phone software, and hardware will cause this kind of failure to turn on. We recommend trying the following:

1. Replace a mobile phone battery of the same model for testing or send the battery to the nearest service center for testing.

2. Take out the battery, clean the metal contacts of the battery with a rubber and test.

3. Take out the SIM card and SD card at the same time, and then press the power button for more than 10 seconds to test whether it can be turned on.

If it still can't be turned on, there may be a problem with the system program or hardware, it is recommended to send the phone to the nearest Samsung service center for testing.

Hello, first replace the charger of the mobile phone, now the mobile phone charger is basically universal, change one to see if it can be charged up, if it still can't, you can rule out the reason for the charger; If there is a spare battery, replace the battery to see if it can be turned on and charged, if it still can't be turned on, it is likely to be a problem with the mobile phone, and it should be sent to the after-sales service for testing and repair; If it can be turned on and charged normally, it is a problem with the battery.

The battery is over-discharged, and now it can't be charged with the charger, and the battery can't be turned on if it's out of power.

You connect the charger and then press the power button to see if the phone shows the charging status, if it does not show, it is recommended to tear off the power and then press and hold the power button for about 10 seconds to reset the phone, this is to prevent the crash caused by the boot can not be afforded, and then connect the charger to try, if it still does not show charging, you replace the data cable and the charger to try, and then charge the machine for about half an hour, long press the power button for 10 seconds to see if the machine can be turned on, if the machine can not be turned on, it is recommended that you take the machine to the local customer service center for testing and processing.

If you have any other questions, you can enter the OPPO enterprise platform to ask customer service questions!

In this case, it is usually due to the mobile phone being used up, resulting in the automatic shutdown of the mobile phone, although this situation is not easy to damage the mobile phone, but it is best not to use the automatic shutdown during use, which is not conducive to the maintenance of the mobile phone and the battery.

The phone will not turn on after the phone is automatically turned off when it is out of power

After the battery is exhausted, it is normal to not turn on now, mainly because after connecting the charger, the charging is not so fast, and the power still reaches the boot voltage, so it will not turn on, it is recommended to charge for about 30 minutes first, and then try to turn on, so that it should be able to open normally.

If it still doesn't charge, it is recommended that you try again:

Plug and unplug the battery several times (the battery is not removable, save this step);

If there are other spare batteries, replace them with other batteries to test, if it is normal, it means that the other battery has aged or damaged, resulting in no charge.

Flash the machine and try it. Maybe it's due to the damage of the mobile phone system due to power failure, you can try flashing the phone to see, if you can't flash the phone or other situations, it is recommended to take the mobile phone after-sales or repair shop to overhaul it.

Summary. Hello dear, <>

I'm glad to answer for you, just fully charged, as soon as you use it, it runs out of power, and it automatically shuts down. Causes: 1. The current used is too large due to the leakage of the mobile phone motherboard.

2. The protection circuit in the lithium battery is overly sensitive, so the current will be cut off when the current is large. 3. The battery itself has aged. 4. There is dirt on the metal sheet in the contact position of the battery, which causes poor contact with the power supply.

5. The joint between the battery and the mobile phone is easy to loosen.

Just fully charged, as soon as you use it, it runs out of power, and it will automatically shut down.

Hello dear, <>

I'm glad to answer the first judgment for you, just fully charged, and the power will run out as soon as you use it, and it will automatically shut down. Causes: 1. The current used is too large due to the leakage of the mobile phone motherboard.

2. The protection circuit in the lithium battery is too sensitive, and the power will be cut off when the current is changed to the stove. 3. The battery itself has aged. 4. There is dirt on the metal sheet in the contact position of the battery, which causes poor contact with the power supply.

5. The joint between the battery and the mobile phone is easy to loosen.

Hello dear, <>

The extension for you is as follows:PG mobile phone failure: the phone freezes and the screen does not move next to the reason:

PG1, Department Inspection System Crash: When there is a problem with the iOS system, it may cause the mobile phone S machine. This could be due to software issues, update issues, or hardware issues.

2. Application conflicts: Some of the installed apps may conflict with other apps or the iOS system, resulting in the S machine. 3. Insufficient storage space:

If your iPhone doesn't have enough storage space, it may cause the system to slow down or the S machine.

If you don't use it, put it for a few days, the power shows normal standby power consumption, the problem of the motherboard and battery, I fell once a few days ago, is it related to this?

Yes. Let's get it tested.

Summary. Hello dear, this situation is caused by the aging of your phone's battery or other hardware problems. You can solve this problem with the following steps:

1.Make sure your phone charger and charging cable are working properly, if not, you can replace the charger or charging cable. 2.

If your phone's battery is aging, consider replacing it with a new one. You can go to an Apple Authorized Repair Facility or a third-party repair shop for a replacement. 3.

If none of the above steps resolve the issue, it is caused by other hardware issues. You can contact Apple customer service or go to an Apple authorized repair point for repair.

Just fully charged, as soon as you use it, it runs out of power, and it will automatically shut down.

Hello ruler dear, this situation is caused by the aging of your mobile phone battery or other Yeheng Sakura hardware problems. You can solve this problem with the following steps:1

Confirm that your mobile phone charger and charging cable are working properly, and if not, you can replace the charger or charging cable. 2.If your phone's battery is aging, consider replacing it with a new one.

You can go to an Apple Authorized Repair Facility or a third-party repair shop for a replacement. 3.If none of the above steps resolve the issue, it is caused by other hardware issues.

You can contact Apple customer service or go to an Apple authorized repair point for repair.

In addition, you can adjust some options in your phone's settings to extend battery life, such as turning off background apps, turning off automatic brightness adjustment, and turning off location server imitation. These actions can reduce or reduce the energy consumption of your phone and extend the battery life.

The phone runs out of power, and it can't be charged after it automatically shuts down and then turns it off.

Hello Kiss is happy to answer this question for you. The mobile phone runs out of power Sakura finger, automatically shut down and then shut down after it can't be charged What's going on Hello dear, the mobile phone is discharged, you need to connect the mobile phone and the charger, after charging for 5-10 minutes, the charging symbol will appear, please be patient with leather socks. If there is still no response after the above steps are completed, it means that the phone battery has completely gone to sleep.

If you can't activate it yourself, go to the after-sales service to help you activate it. If the after-sales service cannot solve this problem, you can only replace the battery with a new one. Of course, you must pay attention to protect the battery when you use it normally:

When the phone alarms 20% of the battery, it should be connected to the charger for charging in a timely manner, and when the battery is 10%, the phone can no longer be used. It is best to turn it off and let it stand. During the charging process of the mobile phone, you can't go online and travel all the time, so the battery damage is very great, and it will be unsafe to accelerate the aging of the battery.